Connection technology - Import export

In the field there is a frequent need to measure sensor readings rapidly and easily right at the sensor and to transfer them directly to a PC without additional amplifiers or converters. The 9206 USB sensor interface can satisfy this requirement admirably, thanks to its „plug & measure“ design. The USB connection means installation could not be simpler. Typical applications: —Mobile test measurements via laptop —Laboratory test set-ups —Instrumentation and control —Diagnostic measurements in the chemical industry —PC-based recording of expansion figures in bio engineering The USB sensor interface takes its supply from the connected PC via the USB port, and uses it to generate the power supply for the sensors. The initial settings and sensor settings are made by burster in-house and saved in the USB sensor interface. These can then be fine-tuned by the customer.

Category Low pressure hoses and fittings / Connecting technology / Straight / Double sockets / Metric 60° chamfering/imperial 60° chamfering / Stainless steel Product number supplier 202647v

Category Low pressure hoses and fittings / Connecting technology / Straight / Double sockets / Metric 60° chamfering/imperial 60° chamfering / Stainless steel Product number supplier 202645v

Korrodin offers you the entire range of ISO and DIN standard parts for fastening technology. We procure every DIN or ISO part in connection with the connection technology. Whether screws, washers, nuts, grooved pins, cylinder pins and many more.

Category Compressed-air technology / Functional connections / Check valves / For hose connection Product number supplier 240253

Category Compressed-air technology / Functional connections / Check valves / For hose connection Product number supplier 240252

straight connection tapered Category Compressed-air technology / Fast closing connections / Straight / Imperial screw-in thread BSPT beveled Product number supplier 249010017

straight connection tapered Category Compressed-air technology / Fast closing connections / Straight / Imperial screw-in thread BSPT beveled Product number supplier 249010017

Category Compressed-air technology / Plug connections / T-Form / Connectors / Plastic Product number supplier 249030506

Category Compressed-air technology / Plug connections / T-Form / Connectors / Plastic Product number supplier 249030504

The Puro® weight indicator is suitable for a wide variety of industrial weighing tasks. A large, bright display, a traffic light function and five tactile keys ensure convenient operation of the powerful applications. User-friendliness is combined with simple charging and connection technology. The rechargeable lithium-ion battery is easy to change and provides operating time for up to 500 hours. — Large display and a traffic light function for easy and comfortable weighing — Instant stabilisation — Highly developed battery with exceptional operating time — Easy charging via USB-C

Category Compressed-air technology / Functional connections / Check valves / For hose connection Product number supplier 240253

Category Compressed-air technology / Functional connections / Check valves / For hose connection Product number supplier 240252

straight connection tapered rotatable Category Compressed-air technology / Fast closing connections / Straight / Imperial screw-in thread BSPT beveled, rotatable Product number supplier 249010106

straight connection tapered rotatable Category Compressed-air technology / Fast closing connections / Straight / Imperial screw-in thread BSPT beveled, rotatable Product number supplier 249010106

Category Compressed-air technology / Screw connections for air brake systems / Parts / Sealings / Brass/rubber sealing rings Product number supplier 101100

Category Compressed-air technology / Screw connections for air brake systems / Parts / Sealings / Brass/rubber sealing rings Product number supplier 101099

The 9206 USB sensor interface series is ideally suited to Notebook-based mobile use for high-precision, traceable calibration jobs that must be performed on-site for equipment such as presses, torque measurement facilities and pressure control systems. A factory calibration certificate or German-accredited DAkkS calibration certificate can optionally be provided for the USB interface plus relevant sensors, ensuring compliance even with the stringent traceability requirements of quality assurance standards. Specific characteristics: —Cost effective "Plug&Measure" concept —24-bit resolution —Practical and convenient DigiCal calibration and data acquisition software —Pt100 as option —Free LabView driver DLL for integrating in your own software environment —Multipurpose reference measurement chain with optional factory calibration certificate or Germanaccredited DAkkS calibration certificate —6-wire connection technology

User-friendly and intuitive Economical owing to highest availability Robust and extremely low maintenance Powerful Variable strap width 60 cycles per minute, with High-Speed Kit (optional) ASLF 'Anti-Strap-Loss-Function' Constant strap control Automatic cycle start by tabletop sensor (optional) Automatic Strap feed Strap width 5 - 12 mm, either Strap end detection system with automatic discharge of remaining strap Automatic strap tensioning (optional) Coil holder inside (either externally) Operation Terminal with Soft-Button DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Torque controlled strap tension, adjustable Single-Copy-Strap Foot-bar at the operator side Machine movable MFT 'Mono-Frame-Technology' Power connection top (either bottom) Table height steplessly adjustable Table top front hinged by 270 °, removable Wear-free, energy saving direct-drive-motors Low maintenance and low wear strap arch Many specific options available, easily configurable

User-friendly and intuitive Economical owing to highest availability Robust and extremely low maintenance Variable strap width ASLF 'Anti-Strap-Loss-Function' Constant strap control Automatic cycle start by tabletop sensor (optional) Automatic Strap feed Strap width 9 or 12 mm Strap end detection system with automatic discharge of remaining strap Automatic strap tensioning (optional) Coil outside Operation Terminal with Soft-Button DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Torque controlled strap tension, adjustable Machine movable MFT 'Mono-Frame-Technology' Power connection top (either bottom) Table height steplessly adjustable Table top front hinged by 270 °, removable Wear-free, energy saving direct-drive-motors Low maintenance and low wear strap arch Many specific options available, easily configurable

User-friendly and intuitive Economical owing to highest availability Robust and extremely low maintenance Variable strap width Stainless steel configuration 60 cycles per minute, with High-Speed Kit (optional) ASLF 'Anti-Strap-Loss-Function' Constant strap control Automatic cycle start by tabletop sensor (optional) Automatic Strap feed Strap width 5 - 12 mm, either Strap end detection system with automatic discharge of remaining strap Automatic strap tensioning (optional) Coil holder inside (either externally) Operation Terminal with Soft-Button DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Torque controlled strap tension, adjustable Single-Copy-Strap Foot-bar at the operator side Machine movable MFT 'Mono-Frame-Technology' Power connection top (either bottom) Table height steplessly adjustable Table top front hinged by 270 °, removable Wear-free, energy saving direct-drive-motors Low maintenance and low wear strap arch Many specific options...

User-friendly and intuitive Economical owing to highest availability Robust and extremely low maintenance Powerful Variable strap width 60 cycles per minute, with High-Speed Kit (optional) ASLF 'Anti-Strap-Loss-Function' Constant strap control Automatic cycle start by tabletop sensor (optional) Automatic Strap feed Strap width 5 - 12 mm, either Strap end detection system with automatic discharge of remaining strap Automatic strap tensioning (optional) Coil holder inside (either externally) Operation Terminal with Soft-Button DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Torque controlled strap tension, adjustable Single-Copy-Strap Foot-bar at the operator side Machine movable MFT 'Mono-Frame-Technology' Power connection top (either bottom) Table height steplessly adjustable Table top front hinged by 270 °, removable Wear-free, energy saving direct-drive-motors Low maintenance and low wear strap arch Many specific options available, easily configurable

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

Alarm messages can be signalled optically and acoustically at the pumping station or transmitted remotely by mobile phone or phone line. Optical and acoustic alarm in 12 V DC technology for connection to the alarm unit AG 230/12. Product features Multi-tone series combined with xenon flash 32 different tones can be set Volume adjustable up to 105 dB Optical and acoustic signals can be triggered separately

Our KIS slewing rings offer precise rotation technology to reliably connect two or more parts in your application. They are available in a wide variety of designs. As high load-bearing machine elements, they can safely absorb radial, axial and tilting moment loads with one bearing point and thus significantly reduce the effort required for the design of the adjacent construction. Sealed and lubricated, our slewing rings offer long-term performance even under demanding operating conditions. They are used in the fields of mechanical engineering, automation and robotics, among others. We are happy to work with you to develop the right slewing ring for your specific application requirements.

Comprehensive monitoring and alarm functions enable you to react quickly as needed to ensure the reliable availability of heating energy and process heat. — Convenient remote monitoring of your boiler system and access to all important operating parameters — Simply integrate the remote technology for connection via Internet or a company network — Fast and cost-efficient online support from Bosch experts on request — Safety first: Certified, multilevel security concept for your remote access — Automatic alarm notification by text message or e-mail as an option so you can react quickly when needed

Two independent firing units and flue gas paths create a double control range for individual heat consumption. — Very high efficiency across all power ranges — Particularly suitable for highly fluctuating heat and process heat demand — Reliable solutions for heating plants and the manufacturing industry with temperature levels up to 225 °C — Heat supply for the future: Low-NOx or CO2-neutral operation possible — Complete system with intelligent control technology and protected remote connection — Proven and durable boiler technology Made in Germany

The eurolaser laser cutting machine M-1200 for acrylic glass is a compact model with a processing area of 1,330 mm x 1,230 mm (52.3" x 48.4"). Just like all eurolaser laser cutting machines the sealed-off laser technology in connection with exchangeable modular assembly groups reduces the lifecycle costs to a minimum. An investment which pays off! The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.