Connection technology - Import export

Our KIS slewing rings offer precise rotation technology to reliably connect two or more parts in your application. They are available in a wide variety of designs. As high load-bearing machine elements, they can safely absorb radial, axial and tilting moment loads with one bearing point and thus significantly reduce the effort required for the design of the adjacent construction. Sealed and lubricated, our slewing rings offer long-term performance even under demanding operating conditions. They are used in the fields of mechanical engineering, automation and robotics, among others. We are happy to work with you to develop the right slewing ring for your specific application requirements.

Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology

Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology

Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology

Adopting Ethernet standards from the office environment into the industrial world has opened up new perspectives for automation technology. From control level via factory networking to field level, communication has to be provided with high transmission rates and in real time in order to enable remote maintenance and control of complete plants and systems via networks. However, the precondition is robust and high-quality connection technology.

Sensor Actor Line Connectors are used in many applications in the field of automation technology. The installation costs and time spent are drastically reduced through the use of connectors with integral wires. The choice of material and the construction of the connector enable it to be used in a dirty and damp industrial environment. Innovative connection technology fulfilling the requirements of protection class IP67. It comes in a standard programm with overmoulded versions - naturally with anti vibration locking in various cable lenghts and quality.

Adopting Ethernet standards from the office environment into the industrial world has opened up new perspectives for automation technology. From control level via factory networking to field level, communication has to be provided with high transmission rates and in real time in order to enable remote maintenance and control of complete plants and systems via networks. However, the precondition is robust and high-quality connection technology.

Adopting Ethernet standards from the office environment into the industrial world has opened up new perspectives for automation technology. From control level via factory networking to field level, communication has to be provided with high transmission rates and in real time in order to enable remote maintenance and control of complete plants and systems via networks. However, the precondition is robust and high-quality connection technology.

Sensor Actor Line Connectors are used in many applications in the field of automation technology. The installation costs and time spent are drastically reduced through the use of connectors with integral wires. The choice of material and the construction of the connector enable it to be used in a dirty and damp industrial environment. Innovative connection technology fulfilling the requirements of protection class IP67. It comes in a standard programm with overmoulded versions - naturally with anti vibration locking in various cable lenghts and quality.

Sensor Actor Line Connectors are used in many applications in the field of automation technology. The installation costs and time spent are drastically reduced through the use of connectors with integral wires. The choice of material and the construction of the connector enable it to be used in a dirty and damp industrial environment. Innovative connection technology fulfilling the requirements of protection class IP67. It comes in a standard programm with overmoulded versions - naturally with anti vibration locking in various cable lenghts and quality.

CONEC Hybrid connectors soon to be certified according to IEC standard 61076-2-118. For conventional wiring of motors, servo-drives or linear units/drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.

CONEC Hybrid connectors soon to be certified according to IEC standard 61076-2-118. For conventional wiring of motors, servo-drives or linear units/drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.

For conventional wiring of motors, servo-drives or linear units/drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.

CONEC Hybrid connectors soon to be certified according to IEC standard 61076-2-118. For conventional wiring of motors, servo-drives or linear units / drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

ipf cable sockets are used primarily for establishing the electrical connection of sensors. Their features are characterized by rugged design, the highest protection classes (IP67 \ IP68 \ IP69K) and, if desired, with 360° shielding. With the features: bus-ready, suitable for use with drag chains and robots, resistance to oil and chemicals, resistance to welding sparks, their resistance to cleaning agents or high-pressure and steam-jet cleaning, the expanded temperature range of up to +230°C, the rapid interconnection technology and special data transmission properties, the cable sockets meet all requirements in automation technology.

Connecting digital signals directly at the machine can contribute to significant cost and effort minimization. A classic application is the linking of different signals directly in the field. Thus, it is possible to avoid long line paths of many individual devices, which significantly reduces the wiring effort and the need for control inputs. All input signals on the logic modules are visualized by integrated LED and are electrically decoupled from each other. In this way, influences from one device to the other are reliably prevented. The outputs of the modules are overload-proof and the upcoming signal is also indicated by an LED. In addition to logical input signal connections such as AND and OR, versions with signal change control are also available. The ipf logic modules are available for DIN rail mounting or as field modules.

While most generic manometers typically fail after a short time due to vibrations or overload, the TKF-Manometer outlasts even under the toughest conditions. Overpressure safety: Mechanical stop at maximum value. TKF-Manometers are particularly suited for functional heavy-duty applications, less for sensitive pressure measurements For measurement locations under robust conditions Special Features Pressure condition visible from 4 sides Extremely robust For non-high viscous and non-crystallizing substances Overload-proof High vibration- and shock resistance Nominal range 0 to 630 bar Scale with pressure specifications in bar and psi Decades-long proven principle Threaded cover with dual fence. New connection technology between housing and connection thread. No safety-critical opening of the TKFManometer at disassembly. Constructively, the complete casing stays rotatable for 360° even under pressure and allows for tool-free alignment for an optimal viewing angle.