Integration - Import export

Versatile multi-axis system designed for feeding machine stations. The Y axis can be realized with a rack and pinion driving system for multiple independent carriages or with a short belt system for connected Z axes. The motion systems can be designed with recirculating ball guides or with bearings depending on loads, dynamics, and different environments. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

Versatile transfer system for metal sheet handling, designed as the main element in a series of presses which eventually combine with load/unload systems. The system features high positioning precision with heavy duty cycles and high dynamics, and is also available for very extended lengths. It manages cantilever loads to keep one side of the series free for operations. The system is driven by a belt with Ω transmission. The Z axes can be placed at different distances, according to the loads. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

The new UBX flow monitor is designed with all components so that it simply runs smoothly even under harsh climatic conditions. You can count on it.

The xiX- Series is the integrators dream. With only 26.4 x 26.4 x 31 mm and 30 grams it is the smallest camera featuring Sony Pregius™. The fast CMOS sensor offers a high range of High Speed and high frame rates from 2.3 Mpix at 166 Fps to 50 Mpix at 33 Fps. The xiX cameras stream images to the host computer via 2 or 4 lanes on a OCI Express Gen2 bus. Together with minimal latencies and CPU load, the cameras are a perfect fit for embedded vision and multi-camera applications. Thanks to flat flex cabling, the board-level and semi-housed variants allow integration in tight spaces and close proximity between cameras.

The EcoMaster ZWG has a reliable, multistage intermediate gearbox with additional overdrive function. This makes it possible to minimise fuel consumption at any time by working at a low engine speed. This means that the right machine size is always available for every application. In the additionally available overdrive, the machine's engine is in the optimum consumption range with maximum output at the same time. This offers the full litre output with a comparably low fuel consumption. Noise emission is considerably reduced by the speed reduction. The shifting process is conveniently controlled via a display and takes place loadfree during operation.

Panel installation housing, IP 67 Input signals of external sensors 4..20 mA/0..10V / 2 x push pull LCD lighting, mineral glass

Panel installation housing, IP 67 Input signals of external sensors 4..20 mA/0..10V / 2 x push pull LCD lighting, mineral glass

Panel installation housing, IP 67 Input signals of external sensors 4..20 mA/0..10V / 2 x push pull LCD lighting, mineral glass

Panel installation housing, IP 67 Input signals of external sensors 4..20 mA/0..10V / 2 x push pull LCD lighting, mineral glass

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Stampling device for welding work ■ positioning, centering & clamping of metal part, with integrated part scanning The individuel customized solution will be performed according to customer specification!

Mouse pad with integrated wrist support. • Mouse pad with integrated wrist support • With non-slip foam underside and textile surface

Ergonomically designed mouse pad with integrated gel filled wrist support. • Mouse pad with integrated wrist support • Particularly ergonomic, as the gel filling adapts perfectly to the wrist • Textile surface pleasant to the touch

Round, 17-litre, steel waste basket with integrated 2-litre ashtray. Includes 1.5 kg sand. • 17-litre waste basket made of brushed stainless steel with an integrated 2-litre ashtray • Round waste basket with removable inside container and wire insert for easy cleaning • Complete with 1.5 kg sand filling for the ashtray • Ideal for use in smoking zones and entrances • Dimensions of removable ashtray: 60 x 240 mm (H x Ø) • Dimensions of the paper opening: 190 x 125 mm (W x H) • Inner container measurements: 380 x 220 mm (H x Ø)

Transported goods can be reliably protected from environmental influences by using pallet box lids from Craemer. The pallet box lids ensure protection against product damages, thanks to integrated strapping grooves and locking surfaces on the corners. The Craemer pallet box lids are available in different sizes. a) Euro size for CB1: Dimensions L x W x H: 1236 x 836 x 63 mm Weight: 4,5 kg b) Industrial size for CB3: Dimensions L x W x H: 1237 x 1036 x 63 mm Weight: 6,6 kg c) Industrial size for SB3 or HB3: Dimensions L x W x H: 1221 x 1019 x 80 mm Weight: 7,7 kg Characteristics: — Material: PE — Colour: light grey or basalt grey — Integrated locking corners for secure stacking — Integrated strapping grooves Option: — Integration of RFID transponder

With the decentralised solution, gwk adds a machine series that offers a high level of flexibility for numerous applications to its portfolio. The customer can individually and precisely set the ideal cooling water temperature for every production machine and for every process in production. Thanks to the direct connection to the consumer, there are no thermal losses, but instead a high flow rate and constant pressure. The weco wd series consists of easy to operate plug&play machines that can easily be installed and commissioned. Three processes can be run with the solution: Free cooling, refrigeration process for low temperatures down to -5°C and temperature control up to 90 °C –everything can be chosen as desired. There is a total of four models with cooling powers between 14 kW and 36 kW (at 15 °C feed flow temperature) and heating powers between 9 kW and 36 kW.

The new UNI Dicht TRI achieves the highest shielding attenuation values over the complete frequency range and convinces with a very high current carrying capacity for the reliable discharge of undesirably high shielding currents. The installation is simple and safe: only the cable sheath has to be removed at the contact point where the shielding braid is to be contacted. As soon as the cable is inserted into the cable gland, the TRI spring makes reliable contact with the cable shield, even in the case of non-circular or off-centre cables. In any case, this type of contacting from PFLITSCH means that the cable shield does not have to be exposed until directly at the connection point in the control cabinet. Because the shielding braid remains 100% intact, maximum shielding attenuation is achieved and the useful signals are transmitted without unnecessary interference from noise signals.

Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 - 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. Setting the address, baud rate or terminating resistances is not necessary. A name, which is stored in the absolute encoder's non-volatile memory, is assigned via the PROFINET controller to address the device.

This encoder can be integrated inside the "Pin Joint" of heavy machinery equipment. The mounting is straightforward. This encoder is completely integrated in the joint and avoids external parts.

Recording of the angular position and revolutions by means of Hall sensors - absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via EtherCAT. Robust housing (housing sickness 5 mm) manufactured from seawater-resistant aluminium (AlMgSi1) or stainless steel - stainless steel shaft - ball bearing with shaft seal - sensors circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. In the model series TRK absolute encoders, the EtherCAT interface is integrated according to IEC 61158-2 to 6 and encoder profile CiA DSP406. As a "full slave", the TRK supports all EtherCAT addressing modes such as logical addressing, position addressing and node addressing. Use of the CANopen over EtherCAT message and the CANopen encoder profile enable parameter and diagnostic data handling as familiar from CANopen. These are contained in an object directory under the same indices as in the case of CANopen.

Melt Pressure Transducer with Integrated Amplifier The DAI Series offers – in addition to maximum reliability – improved user friendliness in the form of an Auto-Zero Function for local or remote configuration. These models offer mA and mV output signals for further processing. The popular and most commonly used 2-wire and 4-20mA configuration provide unequalled interference in critical environments.

Pressure Transmitter with Integrated Amplifier and Integrated Temperature Measurement The DTAI first of all offers the user the comfort of operating a DAI in combination with temperature measurement. One process connection suffices in order to measure both values. These model offers mA and V output signals for further processing. The popular and most commonly used 2-wire and 4-20 mA configuration provide unequalled interference in critical environments. Liquid filled measuring system Maximum reliability through new membrane technology Standard G-coating to counteract adhesive materials Combined pressure and temperature measurement Robust design with G-Armor flexible components Applications with process medias of up to 400°C (750°F) possible Pressure ranges from 0-50 and 0-2.000 bar (0-725 to 29,000 psi) available Interference resistant signals over long distances Stable output signals

The DAIP Series incorporates a heated sensor tip, which limits the potential for sensor damage relating to the membrane, resulting from installation or removal of the pressure transmitter. Additionally, it offers the comfort of the DAI series in combination with temperature measurement, allowing for heater control. The Gneuss patented heated sensor tip allows the sensor to be easily removed from a “frozen” melt without any problems. The diaphragm is not damaged when the polymer contracts. The DAIP has revolutionized the handling of critical medias, for example PC, PMMA or ABS. Heater with 24V Patented technology Maximum reliabilty through new membrane technology G-coating to counteract adhesive materials Robust design with G-Armor flexible components Interference resistand signals over long distances 3- and 4-wire technology available With integrated amplifier 0-20 mA, 4-20 mA, or 0-10 V output

The 7-axis arc welding robot B4S from the FD series is compact and, thanks to the integrated cable routing, offers optimal protection during the work process. The extended degree of freedom enables a constant torch orientation when immersing in tight work spaces. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P point): R 1435 mm Max. payload: 4 kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 3550 W Weight: 189 kg

The 7-axis arc welding robot B4LS from the FD series is compact and, thanks to the integrated cable routing, offers optimal protection during the work process. The extended degree of freedom enables a constant torch orientation when immersing in tight work spaces. In addition, the FD-B4LS offers an extended arm compared to the FD-B4S and thus a larger working radius. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P-point): R 2008 mm Max. payload: 4 kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 5650 W Weight: 321 kg

Ready-to-install wall heating module with integrated heating register, 25 mm thick, 625 mm wide

Tapping valve bridge with lateral outflow and integrated stainless steel drill milling cutter Model 762 (for plastic pipes (PE oder PVC) Tapping valve bridge with stop valve and for tapping 1½“. The upper part of the milling valve for tapping is already mounted under pressure - ready for use. The tapping cutter with chambered sleeve prevents the drilling chips from being flushed out. The seal material corresponds to the KTW-recommendations of the Federal Environment Agency (UBA) as well as to the requirements acc. to DVGW W270. Application • for plastic pipes (PE oder PVC) DN 50 - 200 • for water PN 16 until DN 150, for water PN 10 until DN 200