Cleaning systems - Import export

Cleanliness pays off over time. GSWNozzles prove this on a daily basis. Always exactly fitting the application, these components free any machine of burrs, oil and dust – quickly and with little noise.

International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of...

Other information E3.10 Inner height hi: 10 mm Inner widths Bi: 20 - 60 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®. E3.15 Inner height hi: 15 mm Inner widths Bi: 20 - 60 mm bending radii R: 32 - 75 mm Pitch: 16,7 mm E-Chain®. E3.22 Inner height hi: 22 mm Inner widths Bi: 20 - 60 mm bending radii R: 44 - 75 mm Pitch: 16,7 mm E-Chain®. iF -Design Award 2005 IPA classification - Report IG0704-400:: ISO Class 1, according to DIN EN ISO 14644-1 for system E3, Series E3.15.040.075.0 at v = 0,5 m/s, 1 m/s, 2 m/s Other information E3.10 Inner height hi: 10 mm Inner widths Bi: 20 - 60 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®. E3.15 Inner height hi: 15 mm Inner widths Bi: 20 - 60 mm bending radii R: 32 - 75 mm Pitch: 16,7 mm E-Chain®. E3.22 Inner height hi: 22 mm Inner widths Bi: 20 - 60 mm bending radii R: 44 - 75 mm Pitch: 16,7 mm E-Chain®. E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Opening and closing of the E-Chain®. Interior separation and strain reliefs. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E3 system E3: System for highly dynamic applications The cycle times are always shorter in the automation, whereas the requirements in noise reduction, service life, vibration dampening are always higher. For this wide area of small E-Chain®, igus® now introduces the E3 system product range that completely caters to these requirements: Extremely low noise operation (max. 38 dB(A)). The resilient element replaces pins and bores as fastener Modular chain made of three elements Cost-efficient crossbar and separator "on the band" Quicker and easier access to cables by the zipper system Good stability through stable, interlocked links Easy to shorten or lengthen Ideal for flat cables Accessories: Separators, integrated strain reliefs, mounting brackets Typical industrial sectors and applications Production and processing of semiconductors Optics Automatic insertion machines Materials handling technology Measuring technology Printer and plotter Clean room application General mechanical engineering iF -Design Award 2005 IPA classification - Report IG0704-400:: ISO Class 1, according to DIN EN ISO 14644-1 for system E3, Series E3.15.040.075.0 at v = 0,5 m/s, 1 m/s, 2 m/s

selfadherent blowout fitting through magnetic base amount of escaping air adjustable finely via a ball valve with position stable uniflextube for accurate positioning also suitable for cooling liquid

ideal for producing an air curtain or for drying extensive areas high blowing power at significantly reduced noise development flexible in user applications

high blowing power at significantly reduced consumption of compressed air and lower noise development for every case of use the right passage ideal for blowing out punch parts Heat Resistance 90° C

the good value for money choice for all standard applications high blowing power at significantly lower noise development flexible in user applications low air consumption Heat Resistance 90° C

This automatic washing & drying system provides high efficient cleaning of elastomers in through-feed method (on option washing with de-ionized, de-mineralized or ultra-pure water possible). Starting from the loading station, the washing drums are conveyed automatically to each washing station (→ station pre-washing → station rinsing → station high pressure cleaning → station high pressure drying) and are finally conveyed to the unloading station after treatment. The dimensions of this system depend on the drum dimensions desired (perforation from 3 - 15 mm possible by choice). Set as our default, the models WD3, WD5 and WD9 are available with different sizes. For industry 4.0 demands, this system is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control of the machine via OPC-UA server can be installed additionally. Siliconisation or other coating of elastomers is possible on option.

CSN® Insulator Heaters are used in flue gas cleaning systems for preheating the insulators and as protection of the equipment against condensation and freezing during shutdown periods

The STAUFF Clean System comprises of a pneumatic launcher and a range of specially designed nozzles and projectiles. The launcher uses standard industrial compressed air pressure between 6 and 8 bar / 87 and 116 PSI to propel a foam projectile through the nozzle and into the pipe, tube or hose bore to have their inside surface cleanedfrom any unwanted contamination. This provides a safe and environmentally friendly tool that requires little formal expertise to operate and apply. The launcher is the part of the system that controls the air supply to propel the projectile from start to finish of the cleaning job. The nozzles are specially designed to affect an airtight seal on any pipe, tube or hose with or without end fittings. Its main purpose is to compress the foam projectile allowing it to enter the internal diameter of the pipe, tube or hose to be cleaned. The projectile is the part of the system that does the cleaning: The foam projectile is sized to be approximately 15 %...

This cleaning machine "Rhönrad" is the ideal choice for the cleaning of parts with cropped areas, which needs to be moved during the cleaning process (rotate or swivel around the horizontal axis). Through the use of a special height adjustable lock-system also smaller baskets can be used without problems. Multi tank systems for special subsequent processes can complemented as well as drying and bath treatment systems. The PERKUTE-System: economically - environmental - effektive Basic unit § Stainless steel version § Compact and sturdy construction § Modern design § Powerful washing pump § High permissible basket load § Low water pressure switch as dry-run protection for pump and heating elements § Tank cover in the return flow, filter baskets incl. § Programmable Siemens S7-1200 touch panel control § Complete machine casing in modern design § Loading ramp incl. collection tray and grating for manual loading § Service hatch for cleaning activities § Mountings for fork-lift §...

The line for tree-length logs is designed for the processing of whole logs with lengths of up to20 meters: With the log feed, debarker, washingsystem, dosing system all the way to the highlyecient disc chippers, the production of highquality chips is guaranteed Key featuresFeeding of the wood from the truck or storage areaLarge gantry or rotating cranes for loads of up to 30 metric tons of woodExtremely robust longitudinal chain conveyors or chip chutesLarge conveying cross-sections and laterally arranged chutesDrum debarkersChipper feeding onveyors for large throughputs Metal sensor and roller conveyor cleaning systemDisc chipperAdvantagesGentle de-barkingMinimal ne material content among chipsHigh safety against jamming of logs

In the PERKUTE cleaner - range you will find the suitable cleaning agent for each application. The alkaline, neutral and acid PERKUTE cleaning agents are ideal for: - Cleaning and degreasing - Conserving - Passivating - Phosphating All detergents are environmental friendly, biodegradable (in accordance with washing and cleaning agent law). We would be happy to send you a product sample and offer a cleaning test free fo charge with your parts. As a completment to our system - cleaning agents, we also offer: - Antifoaming agents - Emulsion splitting agents - Machine cleaniers We will be happy to advice you!

Paint stripping system Clean-o-mat RC - E The proven and solid single-chamber system for the automatic and efficient paint stripping of large and small components. The paint stripping of the products is carried out in the spray process using an appropriate organic bio stripper. Following this, the rinse occurs in a separate system. The PERKUTE-system: economically - environmental – effektive Basic equipment Compact and sturdy construction Made of stainless steel Simple operation Space-saving 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Suction filter made of stainless steel front of the pump Automatic steam extraction Electronic basket drive 2“ ball valve for the tank emptying Safety limit switch at cover Stainless-steel pump Technical data No lieability accepted for specifications, which are subject to alteration. Tailor-made machines to be quoted on request. Before and after pictures

This PERKUTE cleaning system cleans simply and effectively with a very confined cleaning space. The machine is easily loaded by using either a crane or a loading carriage to place the items to be cleaned on the platform. A noticeable feature of the FR cleaning machine is that it offers several simultaneous work process. The PERKUTE-system: economically - environmental – effektive Basic equipment Made of stainless steel Simple operation Space-saving Tank cover, filter basket incl. Low water pressure switch as dry-run protection Suction filter made of stainless steel in front of the pump Adapter for steam extraction Minimum operational costs because of housing insulation in sandwich construction Rotationg blast pipe system incl. fan nozzles Adjustable feed Pneumatic lift gate Programmable electronic control

The approved and economic system of this multi-tank-machine offers various possibilities for all applications in the area of the production and manufacturing industry. Most different process steps like cleaning, rinsing, inter-rinsing and drying makes the machine the all-round talent. The PERKUTE system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Simple operation Adjustable feed fork-lift facility incl. 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Electronic basket drive Tank cover in the return flow, filter basket incl. Long wash liquid service life due to the skimmer (washing tank) Programmable operation operating counter incl. Automatic steam extraction by air blower Powerful washing pump in the washing- and rinsing tank High permissible basket load 2" socket slide valve for the tank emptying Safety limit switch at cover Separate washing- and rinsing tank

"Closing the gap in the Toploader series" PERKUTE - Programme Extension" With the new Clean-o-mat SP 100 cleaning system, PERKUTE is extending its portfolio and is thus closing a gap in the basket diameters previously available in the successful Toploader series cleaning systems. In future, customers can choose between six different basket diameters of 450, 790, 1000, 1190, 1500 and 2000 mm and thus specify a system which matches their needs in terms of the floor footprint and the basket sizes needed. Of course, this compact and robust system has the same proven equipment features as the SP series – a low-density material separator, electronic lid control, automatic steam extraction, etc. – and turns into a real beast of burden with the permissible basket load of 500 kg in the standard version. Of course, it can also be extended with all aggregates for filtering solid matter or for separating out viscous contamination. The cleaning system can be executed as a multi-tank system...

Economic and safe: Hydraulic bolt tensioning systems Single clamps or small clamps for opening and closing reactor pressure vessels or other primary circuit components As a specialist for the design, construction, supply and maintenance of highly automated bolt tensioning systems, we offer our customers demand-oriented solutions for opening and closing pressurized and boiling water reactors as well as other primary and secondary circuit components in nuclear power plants. Our range of services includes single and multiple bolt tensioning devices, bolt turning and handling systems, bolt and blind hole cleaning systems. Siempelkamp bolt tensioning machines reduce your operating sequences for opening and closing to less than 50 % compared to conventional methods

The scrap and short-wood line is designed for processing root pieces, slabs, edgings, panel waste pieces, windfall wood, and of course logs. With the log feed, step feeder, debarker, washing system, dosing system all the way to the highly-ecient drum chippers, the production of high-quality chips is guaranteed. Key features Simple feeding of wood directly from the truck Robust underground bins or vibrating feeders Vibrating conveyor lines Drum chipper Metal sensor and roller conveyor cleaning system Advantages Use of almost any type of wood material Continuous and uniform material feed Safe removal and discharging of rocks, sand, and other contaminants High lling level and high utilization of chipper capacity

Excellent board qualities are only achieved when the endless particle mat is degassed and compacted before being transferred to the ContiRoll®. This is realised by the Siempelkamp prepress for particleboard production. Features, function An air evacuation zone, the angles and levels of which are adjustable. High-pressure zone incl. hydraulic position control Two circulating belts Belt cleaning systems incl. extraction system installed along all the belts Advantages Eective prevention of soiling or material jams No belt indents in the board surfaces Variants, options Endless air evacuation belt

Pipe cleaning systems are designed according to the processing requirements. Here the machine line length changes equivalent to the throughfeed speed. An alkaline cleaning station that adjusts to the individual degree of soiling of the pipe surface to ensure optimum results can be optionally installed together with a drying unit upstream of the pipe coating line.

For its exhaust gas purification systems, Venjakob Umwelttechnik offers heat exchanger systems for utilizing the waste heat. These are characterized by: We build complete heat exchanger systems for heating water, steam, air, and gas or heat transfer fluid. The residual or excess energy contained in the clean gases of the Venjakob exhaust air cleaning systems often has sufficient potential to effectively support the actual production process, the building heater or other energy consumers. Whether as an individual system for heat transfer fluid, warm and hot water, hot air, and vapor, or combined as a downstream system solution for an exhaust air purification system - the planning, construction and production of the plant are done on an individual basis.

This "stand-alone solution" is designed to meet flexible production requirements and can be used for solvent and water based paints. This spray coating machine is both economical and environmentally friendly. It can optionally be equipped with a belt cleaning system and/or a paper transport belt.This makes it possible to alternate between both modes of operation. A quick change between two paint systems (water/solvent based) is simple and fast. This makes it especially attractive for smaller companies to replace manual painting. Working width: 1,300 mm, Working height: 920-960 mm, Machine dimension: 1,900 mm (length) Feed speed: 2-4 m /min. Exhaust air volume: 7,000 m³/h, Supply voltage: 9.6 kW/ 12 A,

Your production spectrum requires both machine technologies? Utilisation, however, is insufficient for a profitable operation of both systems? In this case, make your decision in favour of our new VEN SPRAY CONTOUR! - A 2 in 1 solution. NEW: Belt cleaning system + cleaner and/or combined configuration with a paper belt conveyor system: the paper belt system can be employed for the use of fast drying, non-recoverable paint/lacquer systems (e.g. polyester and 2 C paints/lacquers), whereas the belt system is suitable for recoverable paint/lacquer systems As an option, a selection can be made between dry or wet cleaning. An energy saving recirculating air operation is also possible with solvent based paints (0-50%).

Efficiency and quality of this innovative cleaning system are impressive, from the three-dimensional small parts to large format workpieces in large batch sizes. The performance of the CO2 ice jet is especially convincing when cleaning plastic workpieces. The shown surface plant offers optimum noise emission values of approx. 80dB(A) due to the patented noise protection system comprising follower-type bulkhead partitions. A cleaning jet consisting of a mix of compressed air, CO 2 and CO 2 ice particles causes the soiling on the surface to become brittle. The thermal tension loosens cohesion and detaches the soiling from the workpiece surface. The cleaning jet guarantees the removal of soiling without residue. The DUST FREE and PERFECT applications optimally meet the requirements of the subsequent downstream surface quality, offering maximum thoroughness from dust removal through to cleaning. This process allows gentle cleaning of virtually all components, therefore, it is an alternative to aqueous power washing. Patented detail solutions form the basis for this mature system technology. Small workpieces are reliably held in place by the special hold-down system. The Venjakob pump station developed for this task guarantees the process reliable supply of liquid CO 2 from a low pressure tank system to the cleaning module. A clear advantage of the CO 2 cleaning system over the conventional aqueous cleaning process is its relatively small space requirement.

Price 24,300.00 € Condition Company HAVER NIAGARA GmbH Location Münster, Germany Your Process Processing Category Minerals Package - Year built 2014 Contact person Bernward Wellerdiek B.Wellerdiek@haverniagara.com +49 (0)251 9793 114