All forming - Import export

TINY Magnesium contains magnesium oxide – and thus the highest amount of elemental magnesium of all forms of magnesium. On the basis of the TINYsphere® technologies, it is combined here with the bioenhancer quercetin. This allows the body to absorb the active ingredients up to four times more than in conventional forms. Absorption is further enhanced by the added, soy-allergen-free emulsifier sunflower lecithin, which forms liposomes in the body that enclose and transport the ingredients. - Innovative, patent-pending TINYsphere® technology - Effect scientifically proven in clinical studies - Developed at German universities - Faster and longer lasting effect - 4-fold Increased bioavailability - IFS & HACCP certified - Natural raw material sources - Lactose, gluten & GMO free, vegan We would be happy to meet you for an individual consultation. We look forward to your call: Phone: +49 (0) 40 87409824 or your mail: contact@tiny-technologies.com Website: www.tiny-technologies.

Volumetric cup fillers enable the volumetric dosing of granular products. They can be fitted to all models of vertical form fill and seal machines and are offered in two series: 6 cups or 12 cups. Both models are equipped with a feed hopper with controlled outlet, a product level sensor, a series of cups made of food-grade material, a fixed lower cup carrier and, in automatic mode, a height-adjustable upper cup carrier with cup level sensor. The product is unloaded by gravity at the inlet of the packaging machine and, for fine products, the unloading system is equipped with a flap that prevents the product from spilling.

With the new generation of our combination machines, we have continued to develop the new diversity for forming pipes. Geometries that effectively replace high-cost and expensive turned parts can be formed directly at the pipe end in the endforming machine – for a final component of a single workpiece that is ready for use without elaborate soldering or welding. Implementation of the combination can be specified by you or based directly on the forming geometry. This is usually done using up to 6 axial forming stages and at least one rotary unit. Trimming, as well as axial and rotary forming, may require 2 rotary forming stations. Simple trimming or deburring after forming at the pipe end are no demanding challenges. Therefore, all our axial forming machines and combination machines are equipped with one or several single-drive axes. They have a servo-electrical drive and can be used in each of the holders for the forming stages, making the system is very flexible and compact.

Tantalum is a shiny grey, very hard and yet ductile heavy metal from the vanadium group, it is easy to form and weld. Tantalum belongs to the refractory metals, is very resistant to almost all acids (except hydrofluoric acid) and has a high absorption capacity for hydrogen and nitrogen. In nature, tantalum only occurs bound together with niobium. Tantalum is used in electrical engineering, chemistry, in high-temperature furnace construction, in evaporation plants and even in nuclear technology. Tantalum is added as an alloying component to rust and acid-resistant steels. Tantalum carbide is used for the production of hard metals. At E.WAGENER you can obtain tantalum in all common forms, alloys and processing forms, always in accordance with your requirements.

B-vitamins are of special importance for the human body. The B-vitamins are summarised in the so-called vitamin-B-complex. Among others, they are important for the nervous system, a normal mental role, the metabolism, the mucous membranes and the skin. All B vitamins form a group that can fulfil their metabolic tasks together.

ECKOLD MF 500 - Allrounder-machine with multiple functions to fabricate sheet metal: planishing, wheeling and shrinking The ECKOLD MultiFormer MF 500 combines three machines in one multi-function unit. The MF 500 is able to planish, wheel and shrink sheet metal and is therefore a highly attractive and affordable option for vintage car restorers, technical colleges and artists. All forming tasks can be completed in a single C-frame, using separate modules for planishing, wheeling and shrinking. The MultiFormer MF 500 can also be combined with the Handformer HF 100. This Multiformer MF 500 GL 2 consists of: English wheeling machine MF 500 + planishing hammer GL 2 Optionally available with a Handformer HF 100 for shrinking (not included in this offer). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Order now!

Machine with multiple functions to fabricate sheet metal: planishing, wheeling and shrinking The ECKOLD MultiFormer MF 500 combines three machines in one multi-function unit. The MF 500 is able to planish, wheel and shrink sheet metal and is therefore a highly attractive and affordable option for vintage car restorers, technical colleges and artists. All forming tasks can be completed in a single C-frame, using separate modules for planishing, wheeling and shrinking. The MultiFormer MF 500 can also be combined with the tried and tested planishing hammer GL 2. This Multiformer MF 500 MAX consists of: English wheeling machine MF 500 + Handformer HF 100 for shrinking For our Handformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Optionally available with a planishing hammer GL 2 (not included in this offer). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Order now!

ECKOLD MF 500 - Allrounder-machine with multiple functions to fabricate sheet metal: planishing, wheeling and shrinking The ECKOLD MultiFormer MF 500 combines three machines in one multi-function unit. The MF 500 is able to planish, wheel and shrink sheet metal and is therefore a highly attractive and affordable option for vintage car restorers, technical colleges and artists. All forming tasks can be completed in a single C-frame, using separate modules for planishing, wheeling and shrinking. The MultiFormer MF 500 can also be combined with the tried and tested planishing hammer GL 2 and/or the Handformer HF 100. This Multiformer MF 500 EW consists of: English wheeling machine MF 500 Optionally available with a Handformer HF 100 for shrinking and/or a planishing hammer GL 2 (not included in this offer). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Order now!

Jerko flow measurement is a unique success story since the beginning of the project. At the request of the German Massivumformung e.V., a sensor system for the reliable detection of spray quantities was developed. Of course, the partners of Massivumformung e.V. could rely on the innovative power of Jerko and now have the possibility to monitor their process even better. The sensor is suitable for all common forming lubricants - whether they contain oil or solids. Even non-Newtonian fluids are reliably detected. The sensor has a space-saving design and can be integrated into almost any spray system, even retrospectively. With the sensor you know even before the next forming operation whether the tool has been supplied with the required amount of lubricant and eliminate the resulting tool damage or consequential costs.

Our supply tanks are suitable for all common lubricants. No matter if graphite containing, salty or oil based products, the Jerko spraying unit is equipped for all applications. Standard sizes form 250 litres up to 2.000litres Due to the special surface and well thought-out cleaning function, the unit is durable and requires low maintenance. For cleaning, the complete cover can be lifted off with a few simple movements. This modular system allows easy replacement of the components. The necessary pressure to supply the spray equipment is generated by a piston pump developed by Jerko with a transmission ratio of 1:3.

BIEGLO offers recycled PEEK as granules. This R-PEEK is produced in Europe and offers a very good cost position compared to virgin material. At the same time, BIEGLO is doing something good for the environment in terms of sustainability. PEEK as a high performance thermoplast keeps its properties throughout the recycling process. PEEK-residues do not end up in an incineration plant, but are being recycled in a quality assured way. Besides selling recycled PEEK as granules, we are always interested to buy your sorted, clean and dry PEEK wastes in all forms. If you have any PEEK waste, please do not hesitate to contact us.

Adapter for crimping dies 150kN with this adapter, all crimping dies (C-form) of 130kN and 150kN-units are used with the crimping head PP230H and SL300 HP Block dimension: 78,5 mm

Adapter for crimping dies 150kN with this adapter, all crimping dies (C-form) of 130kN and 150kN-units are used with the crimping head PP450 HP and SL450 HP Block dimension : 92 mm

Economical storage independent from shaft diameter, follow the packing diameter by 1.2 m-pieces Replacement for machined lantern rings Universal use, excellent chemical and thermal resistance Easy to remove with packing extractor No corrosion and wear of shafts, no canting during use Technical parameters Temperature: t = -100 … +250 °C pH 0 - 14 Main application Pumps with mechanical seals with flush port Stuffing box packings with lantern rings Suitable for All Industries Approvals FDA conformity Form of delivery 1.2 m per roll, special length 2 m on request Special sizes on request Packing dimension The hight of the lantern ring depends on the size of packing (see chart). Article (Lanternring) Height x width [mm] Height x width [imp.] STAR-AQUA BLUE 8 mm 7.6 x 11.4 0.30 x 0.45 STAR-AQUA BLUE 3/8" 9.0 x 13.2 0.35 x 0.52 STAR-AQUA BLUE 10 mm 9.4 x 13.2 0.37 x 0.52 STAR-AQUA BLUE 7/16" 10.5 x 14.3 0.41 x 0.56 STAR-AQUA BLUE 12 mm 11.1 x...

The sanding / saw line manufactures the end product to be sold / the basis for subsequent processes – e.g. lamination – from the master board. Very smooth surfaces and dened dimensions may be realised with great accuracy. The sanding line may be installed separately or combined with the saw line as a closed concept. The sanding machine, saws and other process components are designed and combined on the basis of customer requirements. Our goal: to achieve the best product in all forms through the optimum use of resources! Advantages High capacity Safe and gentle material transport, short conveying distances due to direct connection to machines High exibility Rapid access times Optimum coordination of the machines used with the products, the required capacity and interactions

The high-rack store is primarily for linking board production with the downstream processing systems. Formatted raw-board stacks from board production and boards with papers for board lamination are stored intermediately in the high-rack store and delivered to the downstream systems as required. The high-rack store may be installed separately or combined with complete transport systems for connection to the production systems. Tailored to customer requirements, the high-rack store is designed with all the components needed for storage / removal and connection to the production facilities. Our goal: to achieve the best product in all forms through the optimum use of resources! The machines used are tailored in the best way possible to the products, the required capacity and interactions. It is possible to take account of extension stages from the start. Advantages Optimum use of space Safe and gentle material transport

Our SAMNOS fluids are almost 100% biologically degradable fluids that do not require labelling. No work-related dermatological illnesses have occurred to our knowledge. The lubricity is very high, and it has a very effective cooling ability. All SAMNOS fluids form a thin, water-soluble film that protects against corrosion. SAMNOS Standard is a processing medium that evaporates up to 97% residue-free. This fluid can be used with all materials, including plastic. Due to the special cooling properties of the fluid, SAMNOS Standard is used especially with very demanding machining processes.

TYP A 042 Round pin inserter Description The Streckfuss inserting device Type A 042 offers the economical solution, for the mechanised insertion of round pins, solder posts and or - lugs into p. c. boards. With this device, nearly all customer forms of round pins, solder posts / - lugs can be processed. The loose components are filled into the sorting pot of the vibration conveyor. Trough barriers in the helical of the conveyor, the components are ordered. After positioning, the components are handed to the loading slider, which supplies the components to the inserting tool. Working with this device is save and easy: For assembling, hold the p. c. board with both hands on the edges, and place it under the inserting tool. The p. c. board now lies at the bottom of the pressure stamp, while the tooling pin hole is placed directly under the solder post / - lug shaft looming out of the inserting tool. This has the function of a locating pin. The p. c. board is lifted parallel, so the components shaft enters the tooling pin hole. The insertion process is triggered by a foot switch. Components

TYP C 069 Cutting, stamping and bending device for radial components The Cutting and Forming Machine for horizontal & vertical Mounting and tube to tube feeding. The cutting and forming machine Type C 069 is designed to cut and form components with 3 up to 23 leads for vertical or horizontal mounting. The feed magazines and die sets are modular in design to allow quick set up changes. All cutting and forming parameters are manufactured to customer specification. Components

TYP C 069/G Cutting, stamping and bending device for radial components Description To eliminate belt- tolerances the Streckfuss machine Type C 069 G was developed with an integrated touch- facility. With this all usual in the trade component- belts which meet the IEC- Norm can effortless be processed. The component is formed and cut with a maximum tolerance of ± 0,1 mm. The supply of components is exclusively done by reel. For this the machine has a combined location for reel and amo- pack. To save set- up time all necessary toolkits for specific formings are mounted in one unit. These toolkits can be inserted or exchanged within a very short time. When inserting a toolkit the driving- mechanism automatically will be locked. The machine is prepared to keep 2 processing- units. One unit performs upward formings and the other performs downward formings. After the components have been formed and cut they are ejected into a bin for collection. Components

Our range of elbows covers a broad spectrum of measurements, standards and materials for all forms of use in pipeline construction – up to and including those applications with the highest safety requirements. Unusual angles? Non-standardised radii? Limited tolerances? No problem for us – we develop the solutions together with you and customise them to your needs.

The FZ 30 and FZ 35 Portal Milling Machines are the economical solution for a vast variety of tasks. For finishing, and with the FZ 35 even roughing of steel and cast alloys, light alloys and plastics, these machines can be used for all types of materials*. This model range satisfies the sector-specific requirements of many industries. - In pattern and mold making for machining patterns, molds, injection-molding dies and sheet-metal forming tools in all their variety. - Outstanding capacity utilization, because different parts can be set-up at the same time and then machined in succession – of course in unmanned shifts as well. - In aircraft production for the trimming of panels, stretchforming parts, rudders etc., or for special applications of acrylic sheet, cockpit canopies for example. - In ship and boatbuilding for the manufacture of laminating forms, deck structures etc.

The FZ 35 Portal Milling Machine is the economical solution for a vast variety of tasks. For finishing and roughing of steel and cast alloys, light alloys and plastics, these machines can be used for all types of materials*. This model range satisfies the sector-specific requirements of many industries. - In pattern and mold making for machining patterns, molds, injection-molding dies and sheet-metal forming tools in all their variety. - Outstanding capacity utilization, because different parts can be set-up at the same time and then machined in succession – of course in unmanned shifts as well. - In aircraft production for the trimming of panels, stretchforming parts, rudders etc., or for special applications of acrylic sheet, cockpit canopies for example. - In ship and boatbuilding for the manufacture of laminating forms, deck structures etc.

In our company guidelines we have committed to exclusively utilizing purely vegetable products for the production of pharmaceutical glycerine, with a strong emphasis on the aspect of sustainability. The company has decided that crude glycerine based on used cooking oils, which are originally of vegetable origin but in the course of their use have been mixed with fats of animal origin, will only be supplied for technical uses, the same applies to glycerine from the lipolysis of animal fats. It can not be permitted to produce a raw material, whose quality cannot be monitored down to the smallest detail, at the cost of humans and the environment, while adequate economical and ecological solutions exist, which are also safe for human health. There is no question that these solutions exist for the production of glycerine, in form of nearly all common oleaginous plants including rape, sunflower, soy and oil palm. As long as sustainability is ensured, all pure vegetable oils must be...

Roll forming of all sheet metal materials such as steel, aluminum, stainless steel, copper, titanium, molybdenum, pre-painted materials, composite materials from 0.08 mm material thickness.

This Sweater has a full length sleeves, regular straight fit, this one is made out of the latest trend, no matter who you are, where you are and where you come from, this one will be here for you in all size ranges and fits all body forms. Things you must know: Button from the back Full – length sleeves Regular straight fit Wide crewnack 65% Cotton 35% Polyester Note: submit an order on our website and we will give you a suitable quotation regarding your quantity and desgin