Results for
KUBOTA BRABENDER TECHNOLOGIE GMBH
Germany
— Filtering of displaced air during loss-in-weight feeder refill — Filter cartridge with filter material made of polyester fleece (conforms to FDA and GMP directives) — Trapped dust is automatically cleaned by pulses of compressed air (dust falls back into the feeder eliminating ingredient waste) — Models available for hoppers up to 1000 dm³ (35.3 ft³)
Request for a quoteWESSEL-UMWELTTECHNIK GMBH
Germany
The BIOCATDUOscrubber from WesselUmwelttechnik consists of two units. One unit is the already mentioned BIOCATscrubber. A second unit, the DLP (Dust Low Pressure) scrubber stage, is a cleaning stage for separating dust and fine fibres from the exhaust air. With the BIOCATDUOscrubbers from Wessel, gaseous pollutants as well as dust can be removed from the exhaust air at the same time. The BIOCATDUOscrubbers have two separate washing water circuits for this purpose. It is characterised by a compact design, as both units are housed in one column. COMMON USE CASES The BIOCATDUOscrubbers are used in the woodbased panels industry, for example. More precisely where MDF boards (medium density fibre) and moulded fibre parts are produced. Here the exhaust air contains fine wood fibres which have to be filtered out of the exhaust air. Furthermore, pollutants and odours must also be reduced.
Request for a quoteMAHLO GMBH & CO. KG
Germany
Measurement of steam Much unused energy is wasted through the exhaust air during drying processes without appropriate control. The Ecomat AML optimises the heating energy required by monitoring charging of the exhaust air with water steam and controls this factor through the fan speed or the exhaust air vent control.
Request for a quoteR&S PAPIERVERARBEITUNGS-GMBH
Germany
You will find in our assortment: Exhaust air filters of different qualities e.g. M dust class, also in wet-proof, L dust class Micro-hygiene filter, one of our novelties in the assortment Micro-hygiene-filter + exhaust air filter in a set Motor protection filters in various diameters, thicknesses and designs for vacuum cleaners of well-known manufacturers
Request for a quoteIFA TECHNOLOGY GMBH
Germany
IFA Technology designs and implements the right exhaust air purification system for every pollutant. Exhaust air scrubbers are used for exhaust air purification of exhaust air streams from industrial processes loaded with harmful gas. These exhaust air purification systems work according to the principle of absorption and separate pollutants present in the exhaust air in the liquid phase. Depending on the substance, pollutants are either physically dissolved or chemically bound by the addition of lye and/or acid. We consider your individual requirements and build customised exhaust air purification systems for you. With the companies Wessel-Umwelttechnik and Airprotech we have competent partners within the Deurotech Group at our side to develop special and complex systems for exhaust air purification.
Request for a quoteAPROVIS
Germany
What you can expect from APROVIS high-temperature heat exchangers: - Transfer to water / thermal oil / air - Abrasion protection for abrasive components in the flue gas or product gas (e.g. wood gas) - Implementation of individual solutions (e.g. with regard to available space, thermal performance) - Use of various high-temperature stainless steels according to the application in question - Own measurements on site
Request for a quoteAPROVIS
Germany
What you can expect from APROVIS oxidation and three-way catalytic converters: - Individual design for each specific application - Also special production for special applications - Short delivery times - Compliance with the limits over the warranty period - Use of soldered metal supports to withstand high thermal and mechanical loads - No telescoping of the catalytic converter elements
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Quick exhaust valves made of nickel-plated brass. For quick bleeding of cylinders and systems. On request also fully assembled with hose connections and exhaust air silencer. Available in sizes M5 – 1/2
Request for a quoteSAMSYS GMBH
Germany
Oil mist separators are a must in order to ensure the extraction of oil mist from machine tools. With AOF filters we offer a whole series of extraction systems for effective extraction and filtration. The separator can filter emulsion mist, oil mist, smoke and odours. Oil mist filters can be installed on almost all turning machines– and milling machines and BAZ. In this way you can offer a healthy working environment for you and your employees. Heat and odours are effectively filtered and the emulsion separated from the exhaust air can be reused. The filters of the oil mist separators are equipped with multi-stage filtration. The elements are cleanable and reusable. Harmful emissions, dust and aerosols are removed from the air at almost 100%. Health hazards Oil mist and emulsion mist
Request for a quoteSAMSYS GMBH
Germany
Oil mist separators are a must in order to ensure the extraction of oil mist from machine tools. With AOF filters we offer a whole series of extraction systems for effective extraction and filtration. The separator can filter emulsion mist, oil mist, smoke and odours. Oil mist filters can be installed on almost all turning machines– and milling machines and BAZ. In this way you can offer a healthy working environment for you and your employees. Heat and odours are effectively filtered and the emulsion separated from the exhaust air can be reused. The filters of the oil mist separators are equipped with multi-stage filtration. The elements are cleanable and reusable. Harmful emissions, dust and aerosols are removed from the air at almost 100%. Health hazards Oil mist and emulsion mist
Request for a quoteSAMSYS GMBH
Germany
Oil mist separators are a must in order to ensure the extraction of oil mist from machine tools. With AOF filters we offer a whole series of extraction systems for effective extraction and filtration. The separator can filter emulsion mist, oil mist, smoke and odours. Oil mist filters can be installed on almost all turning machines– and milling machines and BAZ. In this way you can offer a healthy working environment for you and your employees. Heat and odours are effectively filtered and the emulsion separated from the exhaust air can be reused. The filters of the oil mist separators are equipped with multi-stage filtration. The elements are cleanable and reusable. Harmful emissions, dust and aerosols are removed from the air at almost 100%. Health hazards Oil mist and emulsion mist
Request for a quoteSAMSYS GMBH
Germany
Oil mist separator – extraction systems for vapours Oil mist separators are a must in order to ensure the extraction of oil mist from machine tools. With AOF filters we offer a whole series of extraction systems for effective extraction and filtration. The separator can filter emulsion mist, oil mist, smoke and odours. Oil mist filters can be installed on almost all turning machines– and milling machines and BAZ. In this way you can offer a healthy working environment for you and your employees. Heat and odours are effectively filtered and the emulsion separated from the exhaust air can be reused. The filters of the oil mist separators are equipped with multi-stage filtration. The elements are cleanable and reusable. Harmful emissions, dust and aerosols are removed from the air at almost 100%.
Request for a quoteANTHERMO GMBH
Germany
Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Our OHLER product line is specifically designed for use in automobiles and caravans. Novelis is one of the leading suppliers of flexible tubes and hoses for the automotive sector with products used for heat protection, air ducts, exhaust pipes, thermal insulation and energy absorption.
Request for a quoteSCHOLL APPARATEBAU GMBH & CO. KG
Germany
Mobile module with integrated air exhaust technique and circulating-air cleaning. Design CNS 18/10, niche for table top devices (available separately). On left and right side of the niche a control panel with on/off switch and main sockets (2 on each side - 2 x 230V and 2 x 400 V). On each side an extension made of CNS with cutouts for GN-containers (3x GN1/6 and 2x GN2/8). Removable threepart splash guard,on guest side made of safety glass (ESG). 2 high performance grease separators with grease collection trays. Cleaning of odors with patented plasma technology in combination with activated charcoal filters.
Request for a quoteR&S PAPIERVERARBEITUNGS-GMBH
Germany
The range of suitable accessories of well-known vacuum cleaner manufacturers is wide and constantly growing. Some examples are floor nozzles in various designs, exhaust air motor filters, telescopic tubes, bio waste bags, household filters, fragrances to absorb and much more.
Request for a quoteRUDOLF GUTBROD GMBH
Germany
Special and flame retardant Just like ICS, ICS-ETFE is also suitable for coating stainless steel process and utility pipework, for example. As a special, flame-resistant interior coating, this is particularily suitable for the coating of exhaust air pipework, for example, in factories in the chip, solar cell and fibre optics industries. ICS is FM-approved - each construction part is marked separately with the FM specification. This coating is also tested according to the American safety standard Factory Mutual Research 4910 and suitable for use in clean rooms.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ANTHERMO GMBH
Germany
Temperature control of gaseous and liquid media Flat tube heat exchangers are generally used as air / air or air / liquid heat exchangers. Flat tube heat exchangers are used where the (exhaust) air is polluted and the installation space is limited. In heat recovery in particular, there are numerous applications for flat tube heat exchangers as so-called exhaust gas / exhaust air heat exchangers. Little installation space and less pressure loss While the rows of tubes in smooth tube heat exchangers consist of round tubes, the rows of tubes in flat tube heat exchangers have a special profile (see illustration). This special tube profile offers advantages over the round profile in certain applications. Flat tube heat exchangers require less installation space than smooth tube heat exchangers with the same exchange area and are therefore also lighter.
Request for a quoteANTHERMO GMBH
Germany
Heat recovery with the help of heat exchangers In industry, waste heat occurs at many points in the production process, which is often released into the environment without being used. In many cases, energy is even used to cool the waste heat flows from production so that they can be released into the environment. Heat exchangers (also called heat exchangers) are used for heat recovery so that the waste heat generated in the production process can be used again in the company. Gaseous or liquid media Waste heat can be in the form of gaseous media (e.g. warm exhaust air, steam, exhaust gases, etc.) or in the form of liquid media (e.g. hot water or other liquids). With the help of heat exchangers, the waste heat can be recovered from both gaseous and liquid media and then made available to the production process at a suitable point as energy in gaseous or liquid media. This process is known as energy recovery or also as heat recovery.
Request for a quoteHASPA GMBH
Germany
rpm. 15.000 kW 0.37 D/mm 120 length 345mm weight 1.45kg dBA 73 Arms 1 air consumption 0.60m³/min exhaust front connecting thread 1/4"
Request for a quoteHASPA GMBH
Germany
(head: diameter 32mm) rpm. 25.000 kW 0.11 D/mm 20.5 length 160mm weight 0.23kg dBA 68 collet 3.00mm air consumption 0.20m³/min exhaust rear connecting thread spezial Angle grinder RAL 10 LR (head: diameter 45mm) rpm. 12.000 kW 0.30 D/mm 36.0 length 140mm weight 0.52kg dBA 71 collet 6.00mm air consumption 0.57m³/min exhaust rear connecting thread 1/4" Angle grinder RAL 20 LR (head: diameter 45mm) rpm. 20.000 kW 0.30 D/mm 36.0 length 140mm weight 0.52kg dBA 74 collet 6.00mm air consumption 0.57m³/min exhaust rear connecting thread 1/4" Big angle grinder RA 14-125 DS (125mm) rpm. 12.000 kW 1.10 D/mm 20.5 length 265mm weight 1.9kg dBA 79 Flange size 22.2mm air consumption 1.13m³/min exhaust front connecting thread 1/2"
Request for a quoteHASPA GMBH
Germany
rpm. 75.000 kW 0.11 D/mm 20.5 length 134mm weight 0.15kg dBA 66 collet 3.00mm air consumption 0.20m³/min exhaust rear connecting thread M8 Straight grinder SP 60 R rpm. 60.000 kW 0.11 D/mm 20.5 length 134mm weight 0.15kg dBA 63 collet 3.00mm air consumption 0.20m³/min exhaust rear connecting thread M8 Straight grinder GA 055 rpm. 55.000 kW 0.11 D/mm 15.0 length 123mm weight 0.15kg dBA 67 collet 3.00mm air consumption 0.10m³/min exhaust rear connecting thread M6 Straight grinder SD 45 LR rpm. 45.000 kW 0.15 D/mm 26.0 length 140mm weight 0.24kg dBA 64 collet 3.00mm air consumption 0.23m³/min exhaust rear connectin thread M8 Straight grinder SD 37 LR rpm. 37.000 kW 0.30 D/mm 36.0 length 160mm weight 0.46kg dBA 74 collet 6.00mm air consumption 0.57m³/min exhaust rear connecting thread 1/4" Straigth grinder SD 22 LR rpm. 22.000 kW 0.63 D/mm 45.0 length 190mm weight 1.0kg dBA 70 collet 6.00mm air consumption 0.85m³/min exhaust rear connecting thread 1/4" Extended body straigth...
Request for a quoteSCHOLL APPARATEBAU GMBH & CO. KG
Germany
Mobile module with integrated air exhaust technique and circulating-air cleaning. Design CNS 18/10, niche for table top devices (available separately).Granite work top 30 mm thick,extended on customer side as tray support. Granite options: Nero Impala, Rosso Multicolor, Rosso Balmoral, Viskont White. Resopal facing on three sides. On left and right side of the niche a control panel with on/off switch and main sockets (2 on each side - 2 x 230V and 2 x 400 V). On each side an extension made of CNS with cutouts for GN-containers (3x GN1/6 and 2x GN2/8). Removable threepart splash guard, on guest side made of safety glass (ESG). 2 high performance grease separators with grease collection trays. Cleaning of odors with patented plasma technology in combination with activated charcoal filters.
Request for a quoteTHERMOTEC PRODUKTIONSGESELLSCHAFT MBH
Germany
• operating temperatures up to 600°C (standard) • completely made of stainless steel • heat recovery factor up to 85% • pressure-resistant up to 150 mbar • completely welded • high degree of efficiency • without seelings • up to 100% gas-tight • low maintenance • small construction volume • flexible coordination due to single-item or small-lot production • distance between plates from 3.5 mm to 7 mm • available in the structural shapes K, L, U and LU • complete seperation of the two gas flows • different current lines possible • different volume flows for exhaust and feed air, applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary. The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application. The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System. Shape L This plate heat exc
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
Thermal cleaning in the WIWOX® IGS thermal system at up to 500° C removes all organic residues, even from fine bores. Depending on the melting and decomposition point of the residues, they are either melted or pyrolysed. The resulting exhaust air during the carbonization phase is burned in the afterburner chamber at over 850° C. Cleaning in the pyrolysis process requires subsequent post-cleaning. Inorganic components, oxidation residues, corrosion, etc. remain on the tool surface and must be removed. The ultrasonic process with acidic or alkaline cleaning media or the blasting process with organic and mineral abrasives are suitable for this purpose.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
By creating specialized aluminum alloys, pioneering new treatments and combining aluminum components with other materials such as paper, plastic and fiberglass, Novelis has become the global quality leader for the transportation manufacturing industry. We have created a range of transportation manufacturing products that provide insulation against heat, sound and gases, high strength so components remain effective under pressure, and superior flexibility for a full range of designs and implementations. Key Novelis aluminum components include heat exchangers, heat protection mats and sleeves, energy absorption elements, hoses, silencers and flexible tubes, including heat protection tubes, air ducts and exhaust pipes. Novelis is a leading supplier of light-gauge, narrow-slit aluminum fin stock (bare and clad) and brazing sheet used in the production of heat exchangers.
Request for a quoteTROTEC GMBH
Germany
Practical benefits: Professional quality "made in Germany" - Original Trotec fabrication Extremely powerful radial blower- max. 1.050 Pa - optimal for ventilation over long hose distance Adjustable air flow up to max. 1.250 m³/h Carrying and stackable construction Light but also sturdy design Foot and transverse rubber feet for vertical or horizontal installation Operating panel guard Dual counter for operating hours and energy consumption Cable box Washable air filter Can be used with the air hoses with diameter 100 mm, 50 mm and 38 mm Technical details: Free exhausting air flow without adaptor plates: 1.250 m³/h Air pressure max.: 1.050 Pa Blower levels: variable Mains connection: 230 V / 50 Hz Power consumption: 170 W Sound level (distance 1,5 m): 73 dB(A) Dimensions (L x W x H): 355 x 430 x 235 mm Weight: 6 kg
Request for a quoteSAMSYS GMBH
Germany
Customized MiJET AC filter for model 30.5 cm Suitable for MiJET 30.5 cm and washing station with MiJET 30.5 cm We have developed the MiJET filter to be able to use it in addition to the oil mist filter. The activated carbon filter is put over the existing air filter. It is fastened with three locking hooks. These keep the active carbon filter in position. The activated carbon filter cannot be used individually. The AC filter helps the user to filter aerosols from the exhaust air. These are increasingly produced by the use of cleaning solutions. MiJET products can be purchased via our Shop.
Request for a quoteSAMSYS GMBH
Germany
Custom MiJET activated carbon filter for model 20.3 cm Suitable for MiJET 20.3 cm and washing station with MiJET 20.3 cm We have developed the MiJET filter to be able to use it in addition to the oil mist filter. The activated carbon filter is put over the existing air filter. It is fastened with three locking hooks. These keep the ACF in position. This Filter cannot be used individually. The AC filter helps the user to filter aerosols from the exhaust air. These are increasingly produced by the use of cleaning solutions. MiJET products can be purchased via our Shop.
Request for a quoteResults for
Air exhausters - Import exportNumber of results
93 ProductsCountries
Company type
Category