Fluid - Import export

Is an automatic transmission fluid that is developed according to the leading equipment manufacturerʼs specifications.It meets requirements of GM DexronII. It provides continuous and perfect power transmissionin torque convertor.Its high viscosity-temperature behaviour enables fast oil circulation at low temperatures and film strength at high temperatures.

INOX DOT 4 INOX DOT 5.1

The product has a biocidal action against viruses and bacteria, the active substance is isopropyl alcohol 75% (v/v), glycerol is added to prevent dry hands. Manufactured according to WHO guidelines.

The product has a biocidal action against viruses and bacteria, the active substance is isopropyl alcohol 75% (v/v), glycerol is added to prevent dry hands. Manufactured according to WHO guidelines.

Fully synthetic brake fluid of the highest quality, applicable in brake and clutch systems of very heavily loaded automobiles. Intended for changing and refilling the fluid in any vehicles where the instructions of use demand applying either DOT3 or DOT4 fluids. Fully mixable with other fluids of the class DOT3 or DOT4. In older cars, substitutes the R3 fluid applied earlier and thus, improves significantly the vehicle operation safety. Meets the requirements of any and all standards valid in Poland: PN-C-40005:2002, FMVSS 116 DOT 4, SAE J 1703. Features high chemical stability, perfect rheologic characteristics at low and high temperatures. Neutral for sealing components and alloys of metals applied in braking systems.

Engine oils, driveline fluids, automotive specialties, coolants, lubricants, hydraulic oils, industrial products, greases and cleaners. Lubricants Milos Livanios distrbution Ports of Adamas and Pollonia Lubricants Milos Livanios and Eko. Lubricants have been developed to meet all the requirements of the REACH regulation on the safe use of chemicals and the CLP regulation on the classification, labeling and packaging, which aligns existing EU legislation to the United Nations Globally Harmonized System (GHS). EKO lubricants applications are supported by special technical advisors, either on the field or through any other communication, always upon request. The specifications of the products may change at any time, without prior notice, due to the continuous product development procedures and the technical evolutions of the equipment. Always consult the Product Data Sheet. For the safe use of the product, consult its Safety Data Sheet.

Different type of semisynthetic metalworking fluids used for the machining of cast iron, steel, copper, brass and aluminium metals composed of base oil, esters, corrosion inhibitors, EP/AW additives and biocides

All in one additive for dot 3, dot 4 and dot 5.1 hydraulic brake fluids composed of specialty corrosion inhibitors and antioxidants in glycol ethers-glycols mixture Dissolves clearly in glycol ethers, glycols and water. 2% (w/w) BESOL BFCI supplies 0,2% antioxidant for the brake fluid Complies with FMVSS No 116 corrosion weight change limits and prevents from copper dissolution during lifetime of the brake fluid High ERBP and WERBP values of BESOL BFCI complies with brake fluid boiling point standards.

The fluid isolation valves with their chemical resistance, compact size and high flow rates are suitable for many applications. On request other sealing materials like EPDM or FKM can be used. Other technical data like electrical connections or the operating pressure range can be adapted.

The fluid isolation valves with their chemical resistance, compact size and high flow rates are suitable for many applications. On request other sealing materials like EPDM or FKM can be used. Other technical data like electrical connections or the operating pressure range can be adapted.

The fluid isolation valves with their chemical resistance, compact size and high flow rates are suitable for many applications. On request other sealing materials like EPDM or FKM can be used. Other technical data like electrical connections or the operating pressure range can be adapted.

The fluid isolation valves with their chemical resistance, compact size and high flow rates are suitable for many applications. On request other sealing materials like EPDM or FKM can be used. Other technical data like electrical connections or the operating pressure range can be adapted.

Depending on the industrial sector, more or less complex processes take place with more or less difficult media. These media are needed either for the production process itself or for supporting processes and can have very special properties. Thanks to the VERINOX used, Lipp can tailor the tank material exactly to medium and process and thus offer the best technical and economic solution. Parts and accessories can also be individually selected and installed according to the project. This means that Lipp system solutions can be considered both for simple solutions such as part of a fire protection system, but also for complex requirements, such as in the pharmaceutical and beverage industry. So much flexibility in terms of the possibilities for use is a powerful argument for cooperation with Lipp. Engineering offices gain a partner who covers a wide range of applications and provides the same high quality worldwide.

The fluid isolation valves with their chemical resistance, compact size and high flow rates are suitable for many applications. On request other sealing materials like EPDM or FKM can be used. Other technical data like electrical connections or the operating pressure range can be adapted.

The braking fluid thermocouple from Therma convinces not only with its compact construction but also with its simple installation. Just screw it in in-place of the air vent screw to measure the temperature of the brake fluid. The subsequent sheathing line can then be comfortably bent in the required direction. When the thermocouple is screwed in, the braking system is then vented through its thread. The temperature measurement of the brake fluid, along with the brake disc surface measurement, also supplies important control values for a successful and safe race. During long races or races with many downhill routes, the brake disc overheats over-proportionally. The accruing radiation heat during this has a direct effect on the brake fluid, respectively heats it up. Depending on the type of brake fluid being used, it already reaches its boiling point at approx. 140–260 °C.

Separate brake fluid reservoir for individual installation in the engine compartment.

INOX Dexron II INOX Dexron III INOX ATF X6 INOX ATF X7

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of alkaline solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

Lightweight filler fluid restores structural damage to hair. Prevents split ends, detangles hair ends. The use of the fluid in combination with shampoo, mask and spray of the b2 Hair series enhances the effectiveness of care, as the formulas are perfectly balanced with each other. INGREDIENTS: Cyclopentasiloxsane, Dimethiconol, Biotin, Hydrolyzed Silk, Tocopheryl Acetate, Hydrolyzed Quinoa, Retinyl Palmitate, Parfume.

AVAILABLE MAC COSMETICS EU CLEAN AND QUALITY CERTIFIED FOR MORE INFORMATION PLEASE DO NOT HESITATE TO CONTACT US.

Très haute protection IP50+ pour le visage . Renforcée contre les UVA longs grâce à une version optimisée du système filtrant Mexoplex associé à l'eau thermale de La Roche-Posay, apaisante et antioxydante. Pour peau sujette aux intolérances et allergies solaires. En cas d'ensoleillement extrême. Prévention des taches pigmentaires dues au soleil (grossesses, photosensibilisations). Sans parfum. Sans paraben. Non Comédogène. Très résistant à l'eau.

Pressol pneumatische Vloeistof pomp model 19135843 Om dunvloeibare media zoals radiatorvloeistof te transporteren Drukverhouding 1:1 Opbrengst bij 75 cycle per minuut 20.6 liter Maximale opbrengst bij vrije uitloop 66 L/min Lengte pombuis 860mm voor 200/220L drum

PRODUCT DESCRIPTION POWER STEERING FLUID is a top-quality, mineral oil-based, versatile power steering fluid specially designed for equipment that demands Dexron-type fluids. It delivers dependable friction performance, maintains stability at high temperatures, offers excellent anti-wear characteristics, ensures smooth flow even in cold conditions, and meets the stringent material compatibility standards outlined in current specifications. BENEFITS Some of the benefits of using POWER STEERING FLUID are: Complies with the specifications of various automobile manufacturers. Appropriate for a wide range of passenger cars and light commercial power steering systems. Exceptional anti-wear properties that minimize wear and extend the lifespan of the system. Compatible with a broad spectrum of seals, reducing oil leakage and enhancing seal longevity. Effective foam control and oxidation resistance ensure smooth operation and prolonged fluid life.

PRODUCT DESCRIPTION Universal CVT Transmission Fluid is a premium synthetic fluid meticulously crafted for use in a diverse range of vehicles equipped with Continuously Variable Transmissions (CVTs). CVTs come in two varieties: chain-driven and belt-driven, both relying on a torque converter where significant metal-to-metal contact takes place. It is essential to maintain specific friction characteristics to ensure optimal power transfer from the engine to the wheels. The friction generated in this process can be highly detrimental, potentially leading to a decline in the performance of lubricants. To ensure a trouble-free and extended operational life, lubricants must excel in key areas such as anti-shudder properties, shear stability, resistance to foaming, antioxidation, and scuff resistance. Universal CVT Transmission Fluid has been engineered to possess precisely tuned metal-to-metal friction characteristics, aiming to maximize the efficiency of the torque converter.

PRODUCT DESCRIPTION DCT Fluid is a specialized lubricant designed for dual clutch transmissions, commonly referred to as Direct Shift Gearbox (DSG) transmissions. Crafted from premium synthetic base oils, it incorporates a performance-oriented formulation that ensures seamless shifting, anti-shudder capabilities, and enhanced transmission responsiveness. These optimized frictional attributes not only lead to improved fuel efficiency but also offer robust protection for transmission components, minimizing wear and tear. BENEFITS Exceptional load-carrying capacity, anti-wear, and extreme pressure performance. Anti-shudder properties to prevent vibrations on the engine flywheel. Protection against corrosion and foam formation. High-temperature shear stability and oxidation resistance. Enhanced clutch friction and synchronizer durability. Maximum protection during high-stress operating conditions. Promotes improved fuel efficiency compared to traditional transmissions.

Lödige has years of expertise in continuous granulation. Nowadays, continuous ringlayer mixers are established systems for continuous granulation in many industries. However, until now the Lödige product range was missing a suitable dryer. The continuous fluid bed dryer closes this gap. Together with the ringlayer mixer CoriMix® and the customer-specific dosing system, this dryer provides a complete continuous granulation line: GRANUCON®. Dryer operation is based on the fluid bed process. A general disadvantage of continuous fluid beds is the wide retention time distribution within the machine. Lödige’s developers have looked into this problem and have found a solution: integrating a screw in the fluid bed dryer. This has a limiting effect on the retention time distribution. — Exchangeable floor — Quick screw removal — Integrated WIP cleaning — Individual purging of filter elements

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Equipment for petrol pumps for the volumetric dispensing of fuel: normal and super petrol, unleaded petrol, biofuels and diesel Type of hose: Flexible Volukler rubber hose Ø 25 x 37 mm Pipe: NBR resistant to petrol, black, smooth. Coating: NBR/PVC resistant to oil and bad weather, black, smooth.