Dip switch - Import export

Situations often occur in practice in which it is necessary to place a measuring amplifier immediately in the neighborhood of the sensor in order to be able to access a standard signal there. In this way, long distances to the evaluating electronics can be covered. This task can ideally be performed by the 9236 in-line measuring amplifier. With its high degree of protection (IP67) its singlechannel version can be integrated into the application even in the tough environment outside the switch gear cabinet. — Automatic production machinery — Laboratory measurements — Integration into customer‘s circuit boards — Field measurements Features: — Operates with up to 4 measuring channels — Voltage output 0 to ± 5 V / 0 to ±10 V — Protected against reverse connection and short-circuit — Also available as circuit board without housing — Simple configuration using DIP switch — High degree of protection up to IP67

The µCAN.8.dio-SNAP is a freely configurable digital I/O module featuring 8 channels. Module ID and bit rate can be set via DIP switch or via CAN bus (LSS, CiA 305). The module supports the protocols CANopen CANopenFD and J1939.

The transducer unit µCAN.8.ti-SNAP is equipped with 8 inputs for thermocouples or Pt100 sensors. The integrated CAN interface supports CANopen and J1939 protocols. Bit rate and node-ID may be set via DIP switches inside the device or via LSS.

Rugged IP65 and NEMA4 Aluminium Chassis, modular design Front Panel IP65/NEMA4 Standard, water and dust proof Modular design, compatible with capacitive touch screen module 5-wire resistive touch screen 5-wire resistive touch, with water, dust, and oil proof; click life is 50 million times Neutral front panel Nodka offers neutral front panel design without logo in neutral packag, as well as customized logo and color 8 Digital Input and 8 Digital Output 8DI+8DO, Wet contact input(24V), OC gate output(24V 300mA) Working well with INtime, VxWorks, RTX, EC-Win and Linux ect.., Microsecond-grade real-time vibration, the most stable hardware platform for Motion Control, Robot Control, and PLC Control applications.Dip-switch for RS232/RS485 At one side of the box, there is a dip-switch design for easily setting RS232 or RS485. RS232/485 Interface with surge protection, RS485 support automatic flow control.

Rugged IP65 and NEMA4 Aluminium Chassis, modular design Front Panel IP65/NEMA4 Standard, water and dust proof Modular design, compatible with capacitive touch screen module 5-wire resistive touch screen 5-wire resistive touch, with water, dust, and oil proof; click life is 50 million times Neutral front panel Nodka offers neutral front panel design without logo in neutral packag, as well as customized logo and color 8 Digital Input and 8 Digital Output 8DI+8DO, Wet contact input(24V), OC gate output(24V 300mA) Working well with INtime, VxWorks, RTX, EC-Win and Linux ect.., Microsecond-grade real-time vibration, the most stable hardware platform for Motion Control, Robot Control, and PLC Control applications.Dip-switch for RS232/RS485 At one side of the box, there is a dip-switch design for easily setting RS232 or RS485. RS232/485 Interface with surge protection, RS485 support automatic flow control.

Rugged IP65 and NEMA4 Aluminium Chassis, modular design Front Panel IP65/NEMA4 Standard, water and dust proof Modular design, compatible with capacitive touch screen module 5-wire resistive touch screen 5-wire resistive touch, with water, dust, and oil proof; click life is 50 million times Neutral front panel Nodka offers neutral front panel design without logo in neutral packag, as well as customized logo and color 8 Digital Input and 8 Digital Output 8DI+8DO, Wet contact input(24V), OC gate output(24V 300mA) Working well with INtime, VxWorks, RTX, EC-Win and Linux ect.., Microsecond-grade real-time vibration, the most stable hardware platform for Motion Control, Robot Control, and PLC Control applications.Dip-switch for RS232/RS485 At one side of the box, there is a dip-switch design for easily setting RS232 or RS485. RS232/485 Interface with surge protection, RS485 support automatic flow control.

Rugged IP65 and NEMA4 Aluminium Chassis, modular design Front Panel IP65/NEMA4 Standard, water and dust proof Modular design, compatible with capacitive touch screen module 5-wire resistive touch screen 5-wire resistive touch, with water, dust, and oil proof; click life is 50 million times Neutral front panel Nodka offers neutral front panel design without logo in neutral packag, as well as customized logo and color 8 Digital Input and 8 Digital Output 8DI+8DO, Wet contact input(24V), OC gate output(24V 300mA) Working well with INtime, VxWorks, RTX, EC-Win and Linux ect.., Microsecond-grade real-time vibration, the most stable hardware platform for Motion Control, Robot Control, and PLC Control applications.Dip-switch for RS232/RS485 At one side of the box, there is a dip-switch design for easily setting RS232 or RS485. RS232/485 Interface with surge protection, RS485 support automatic flow control.

Rugged IP65 and NEMA4 Aluminium Chassis, modular design Front Panel IP65/NEMA4 Standard, water and dust proof Modular design, compatible with capacitive touch screen module 5-wire resistive touch screen 5-wire resistive touch, with water, dust, and oil proof; click life is 50 million times Neutral front panel Nodka offers neutral front panel design without logo in neutral packag, as well as customized logo and color 8DI+8DO, Wet contact input(24V), OC gate output(24V 300mA) Working well with INtime, VxWorks, RTX, EC-Win and Linux ect.., Microsecond-grade real-time vibration, the most stable hardware platform for Motion Control, Robot Control, and PLC Control applications.At one side of the box, there is a dip-switch design for easily setting RS232 or RS485. RS232/485 Interface with surge protection, RS485 support automatic flow control.

The absolute encoders series MEM-Bus avail on an interface to connect to field bus systems according to the CANopen standard. The encoders comply with standards CIA DS301, DS406, DS 305, featuring the functions of Class 2. They are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). The encoder operating parameters are set directly by the user: revolutions no., steps per rev., rotation direction and preset no. The diagnostic function signals possible parameter, position or temperature errors as well as the battery alarm – the data memory is anyway ensured for a long period (30 years). The baud rate and node selection can be easily set by LSS protocol or by means of dip-switches. MEM40-Bus encoders avail on 3 signalling LEDs for supply state, line and error. The encoder comes with metal housing, round flange, solid or hollow shaft. The electrical connection is by M12 connector. The encoders are UL listed for Canada and USA markets.

This is a universal fuel pump remote control which controls 5 different fuel pump types. This product is designed for fuel service companies, it can substitute 5 remote controls by itself. With the DIP-Switches the user can easily switch to the desired pump type and control the pump just like with the original remote control. This gas pump remote control can handle five different types of fuel dispenser: • Tokheim WWCT, COCA • Satam • Wayne Dresser IGEM • Tatsuno Benc • Adast Features • High power infrared (up to 4 m working distance) • 5 in one remote controller • Durable case • Battery saver function • Indication LED

The DKP900 is a differential pressure transducer suitable for almost every HVAC application. The measurement range as well as the analog output signal can be set and adjusted on site. Therefore you will only have to keep one model type in storage for any of your applications. You can choose from two sensor ranges 0...1 000 Pa and 0...10 000Pa which are scaleable with a DIP switch. The transducer comprises a sensor with good long-term stability and an optional zero point calibration, which can be performed at the push of a button. A module for automated calibration can be built-in, too. This allows for regular calibration and makes it virtually maintenance free. The DKP900 is protected against splash water according to IP65 making it suitable for operation under rough conditions.

• Spring-cage clamp connection • Compact design, width only 6.2 mm • Accuracy 0.1% • Programming via DIP-switch or software

This pressure transmitter is particularly well suited for monitoring filters and pressures in HVAC (heating, ventilation and air conditioning) applications. DIP switches allow users to configure the output signal and switchable measurement ranges (optional). Settings provide an option for conversion to a root-extracted output signal (displayed as a % of the maximum output value). An internal button is also available for performing a zero-point correction or fine-tuning the end value. An optional display allows users to read the measured value directly on site in Pa or kPa. With an optional time constant (up to 10s), the instrument can produce an attenuated output signal, even under unstable pressure conditions. An optional two-wire version of the device is also available for reducing wiring complexity. In addition to simple wall-mounting with just 2 screws, the PS 17 is also suitable for mounting on top-hat rails.

Safety management in 2 zones in a compact 45 mm format Short-circuit detection in 2 µs, self-resetting Removable terminals Performance level with AWAX controller: PL = e Safety category: 4 Safety Integrity Level: SIL 3 Time before dangerous failure: MTTFd = 415 years Cycle before dangerous failure: B10d=100,000 at 5A Risk duration: 20 ms max. Cable severing protection: yes (opening of safety lines) Short-circuit and overload protection: yes, using DLC (opening of safety lines and current limiting in contacts) Reaction 2 µs ultrafast Safety contacts/diagnostics zone 1: 3x NO 8A/250V redundant / 1x NF 8A/250V redundant series Safety contacts/diagnostics zone 2: 3x NO 8A/250V redundant / 1x NF 8A/250V redundant series Indicators: 2 display LEDs per zone for diagnostics and 1 LED for power Reset: configurable by dip-switch (SR=Automatic, N=manual) Mounting: symmetrical DIN 35mm rail on DIN 50022 Mounting: IP 54 electrical box Electrical connection: Maximum 14 AWG (2.08 mm²) / 250V minimum Temperature: -20°C to +60°C Certification: TÜV Rheinland 01/205/5168/11

Safety management in a compact 22.5 mm format Mono or two-channel with wiring. "Low consumption" Inputs Removable terminals Performance level with AWAX controller: PL = d Safety category: 3 (two-channel) Safety Integrity Level: SIL 2 Time before dangerous failure: MTTFd = 240 years Cycle before dangerous failure: B10d=100,000 at 5A Risk duration: 20 ms max. Cable severing protection: yes (opening of safety lines) Safety contacts/diagnostics: 2x NO 8A/250V redundant / 1x NF 8A/250V parallel redundant + 1x NO static 400 mA Indicators: 3 LEDs for diagnostics Reset: configurable by dip-switch (SR=Automatic, N=manual) Mounting: symmetrical DIN 35mm rail on DIN 50022 Mounting: IP 54 electrical box Electrical connection: Maximum 14 AWG (2.08 mm²) / 250V minimum Temperature: -20°C to +60°C

Safety management with 85~265 VAC power Short-circuit detection in 2 µs, self-resetting Removable terminals Performance level with AWAX controller: PL = e Safety category: 4 Safety Integrity Level: SIL 3 Time before dangerous failure: MTTFd = 415 years Cycle before dangerous failure: B10d=100,000 at 5A Risk duration: 20 ms max. Cable severing protection: yes (opening of safety lines) Short-circuit and overload protection: yes, using DLC (opening of safety lines and current limiting in contacts) Reaction 2 µs ultrafast Safety contacts/diagnostics: 3x NO 8A/250V redundant / 1x NF 8A/250V parallel redundant Indicators: 3 LEDs for diagnostics Reset: configurable by dip-switch (SR=Automatic, N=manual) Mounting: symmetrical DIN 35mm rail on DIN 50022 Mounting: IP 54 electrical box Electrical connection: Maximum 14 AWG (2.08 mm²) / 250V minimum Temperature: -20°C to +60°C

Atex and machine safety management in a compact 45 mm format Atex dual-channel insulation barrier and controller for built-in machinery safety Atex safety ATEX standards EN 60079-0 EN 60079-11 EN 60079-25 EN 60079-26 ATEX marking [Ex ia] IIC Ga [Ex ia] IIIC Da II(1)GD Product used in combination with the "ANATOM78S- (PL or OX)-EEX" sensor Machine Safety Performance level with AWAX controller: PL = e in accordance with ISO 13849-1 Safety category: 4 in accordance with ISO 13849-1 Time before dangerous failure: MTTFd = 120 years Cycle before dangerous failure: B10d=100,000 at 5A Risk duration: 20 ms max. Cable severing protection: yes (opening of safety lines) Short-circuit protection and overload protection: yes (system shutdown). Requires return to a service workshop for a total control and troubleshooting. Safety contacts/diagnostics: 3x NO 8A/250V redundant / 1x NF 8A/250V redundant parallel Indicators: 3 LEDs Reset: configurable by dip-switch (SR=Automatic, N=manual) Mounting: symmetrical DIN 35mm rail on DIN 50022 Mounting: IP 54 electrical box Electrical connection: Maximum 14 AWG (2.08 mm²) / 250V minimum Temperature: -20°C to +40°C. Certification: INERIS 06ATEX0007X