Connector systems - Import export

Connecting element made of plastic

We offer round connector systems in M8 × 1/Ø 8 mm and M12 × 1 acc. to IEC 61076-2-101 as connection and extension cables. The 1/2" and 7/8" round connector systems are particularly suitable for applications with increased power requirements. The M16 and M23 × 0.75 × 1 round connector systems are used for connecting multiple junction systems. A, B, C, or I-type valve connectors acc. to EN 175301-803, are available with and without protective circuit for the connection of various different valves.

Aside from the tried-and-tested uses of the E6, the new generation offers additional advantages which significantly simplify operation. In addition, design changes have improved accessibility to the interior, reduced weight and made assembly easier. - Option without camber (NC) simply by turning the inner link - Extremely quiet due to the small pitch and "brake" in the stop-dog system - (E61.29.070.055.0 at 1m/s = 32dB(A) according to igus internal test 4479) - Extremly low vibration - Low-abrasion connector system (no bolts and holes necessary) - Virtually no polygon effect, thereby "smooth rolling" operation - Smooth interior design for a long lifetime for cables and hoses - E61.29 series: cross bars on both sides can be snapped open and removed along the inner and outer radii - Weight savings approx. 30% compared to the E6 system - Cost-effective

System fixed with solidian LShape increases its ductility, load bearing capacity and evenly distributes load to the surface or the entire system. solidian LShape is made with special fillers that create an active connection to the mortar or concrete. specially developed system for fixing wall reinforcement reinforcement system fixed with solidian LShape increases its ductility, load bearing capacity and evenly distributes load to the surface or the entire system connector made with special fillers that create an active connection to the mortar or concrete

System fixed with solidian LShape increases its ductility, load bearing capacity and evenly distributes load to the surface or the entire system. solidian LShape is made with special fillers that create an active connection to the mortar or concrete. specially developed system for fixing wall reinforcement reinforcement system fixed with solidian LShape increases its ductility, load bearing capacity and evenly distributes load to the surface or the entire system connector made with special fillers that create an active connection to the mortar or concrete

System fixed with solidian LShape increases its ductility, load bearing capacity and evenly distributes load to the surface or the entire system. solidian LShape is made with special fillers that create an active connection to the mortar or concrete. specially developed system for fixing wall reinforcement reinforcement system fixed with solidian LShape increases its ductility, load bearing capacity and evenly distributes load to the surface or the entire system connector made with special fillers that create an active connection to the mortar or concrete

System fixed with solidian LShape increases its ductility, load bearing capacity and evenly distributes load to the surface or the entire system. solidian LShape is made with special fillers that create an active connection to the mortar or concrete. specially developed system for fixing wall reinforcement reinforcement system fixed with solidian LShape increases its ductility, load bearing capacity and evenly distributes load to the surface or the entire system connector made with special fillers that create an active connection to the mortar or concrete

NSPV PV4.0 Solar panel connector 1000VDC Features: TUV certified; Imported PPE insulation material; IP67 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ. P.S.: Prices excluding dustproof cap.

NSPV PV4.0 Solar branch connector 1000VDC 2 to 1 Features: TUV certified; Imported PPE insulation material; IP67 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ.

NSPV PV4.0 Solar branch connector 1000VDC 3 to 1 Features: Imported PPE insulation material; IP67 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ.

Insulation material: PPE/PA Safety degree: II Rated current:35A Flame class: UL94-V0 Rated voltage:1500VDC Ambient temperature range:-40-+85(IEC) Test voltage:8kV(50Hz,1min) Suitable cable cross sections:2.5-6mm2/14-10AWG Contact resistance: less than 0.25mohm Connecting system: Crimp connection Contact material: Copper, Tin plated Nut cap locking force:0.8-1.0Nm Degree of protection:IP68(1m,1H) Upper limiting temperature:110(IEC) Overvoltage category/Pollution degree:CATIII/2

NSPV PV4.0 Solar fuse connector 1000VDC both cables end Features: Imported PPE insulation material; IP67 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; Current reaching 30A. P.S.:Recommended that the Max ambient temperature is 75℃，and not exceed 8 hours in 75-85℃. P.P.S.: Prices excluding fuse and cable.

Features of 2023 New Arrivals Solar Fuse Connector: 1.Rated voltage up to 1500VDC. 2.Rated current up to 100A. 3.Rated breaking capacity reach 10kA. 4.In conformity with IEC60269.6 standard.

PV4.0 2 to 1 Solar Branch Inline Fuse Connector Insulation material: PPE/PA Rated current(Without fuse): Max. Input:30A                                               Max. Output:60A Rated voltage: 1500VDC Test voltage: 8kV Typical contact resistance: ≤0.25mΩ Rated Impulse voltage: 16kV Contact material: Copper, Tin plated Degree of protection: IP68 Safety degree: II Overvoltage category/Pollution degree: CATIII/2 Flame class: UL94-V0 Ambient temperature range: -40℃…+85℃(IEC) Suitable cable cross sections: 4-10sqmm Upper limiting temperature: 110℃(IEC) Fuse specifications: 1A-50A Regulatory approval: TUV/CE(EN60269/EN62208)

NSPV PV4.0 Solar fuse connector 1000VDC female male end Features: Imported PPE insulation material; IP67 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; Current reaching 30A. P.S.:Recommended that the Max ambient temperature is 75℃，and not exceed 8 hours in 75-85℃. P.P.S.: Prices excluding fuse.

NSPV PV4.0 Solar branch fuse connector 1500VDC 2 male cable connectors to 1 female end Features: TUV certified; Imported PPE insulation material; IP68 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5kV DC and high current Max. Output:60A. P.S.: Prices excluding fuse and cable. P.P.S: Cable length is customized.

Category Compressed-air technology / Plug-in connector systems for air brake systems / Raufoss / T-Form / Bulkhead socket Product number supplier 32144301

Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,Imin)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

Plastic fastener for fixing solar fuse connector in solar panel systems

The cutlery insert FUTURA sets standards in design and functionality. Characteristic features are the proven transverse divisions of the cutlery compartments, the wide compartment for large utensils and the new, variable multi-purpose section. The FUTURA cutlery insert is a prime example of Intelligent innovative design: the ergonomic transverse divisions together with the generously apportioned compartments and variable multi-purpose section offer optimum use of space. The variable connector system is complemented by colour-matched slot-in dividers.

The cutlery insert FUTURA sets standards in design and functionality. Characteristic features are the proven transverse divisions of the cutlery compartments, the wide compartment for large utensils and the new, variable multi-purpose section. The FUTURA cutlery insert is a prime example of Intelligent innovative design: the ergonomic transverse divisions together with the generously apportioned compartments and variable multi-purpose section offer optimum use of space. The variable connector system is complemented by colour-matched slot-in dividers.

This EtherCAT I/O module has been specifically designed with industrial environments in mind. Its IP 65 protection allows its installation anywhere at the machine making switching cabinets and further housings more or less redundant. You may mount the unit directly on a base plate. Due to the modules integral plug connector system, sensors and actuators are never far away from the modules. Standardised cable connections reduce mounting times while enhancing the security of the wiring. The IP65 EtherCAT I/O modules are intended for mechanical & plant engineering applications also in conjunction with systems other than those supplied by Kendrion Kuhnke Automation.

RK tube connectors – the flexible alternative to welded connections The clampable tube connectors from RK Rose+Krieger are a cost-efficient solution for the positive and ready detachable connection of a diverse variety of systems – without the need for drilling and welding. Depending on the field of application and the expected load, RK Rose+Krieger offers tube connectors made of plastic (Light Clamps), aluminium (Solid Clamps) or stainless steel (Robust Clamps). The Solid Clamps tube connector system also includes the RK monitor mounting for the fixation and ergonomic adjustment of monitors and touch screens used in industrial applications. Say goodbye to welding – that could be the motto of the clampable RK tube connectors The simple assembly technology of the clamping elements eliminates the need for time-consuming and cost-intensive drilling and welding work.

The sun | power VR M battery is particularly suitable for village power supply, security lighting, UPS systems and home storage. By using HOPPECKE ESS technology, the sun | power VR M battery offers excellent cycle stability and increased service life. Furthermore, the HOPPECKE system connector ensures increased short-circuit safety. Sun | power VR M is maintenance-free regarding water refilling.

Durable, robust, and reliable: the hand tool VNG 371 for the processing of blind rivet nuts (M5 to M10) and blind rivet bolts (M5 to M8). The VNG 371 is supplied in an impact-resistant plastic case and equipped with a comfortable drill rod for the easy lowering of the set connector and a quick-change system for the mandrels.

Digital Multi Display2 4V for wheel loader FERRUM DM models: 308 x4 312 x4 416 x4 620 x4 625 x4 Not suitable for converting from analogue. on digital display because the analog system has different connectors and the cover does not fit.

Bus technology has advanced over the last few years in industrial automation. The connectors required for data transmission are very bus-specific in their design. To access the very complex world of bus technology, CONEC offers connectors for Profibus DP, Device- Net and Industrial Ethernet 10 Gbit. Profibus is a manufacture-dependent, open field bus system for a variety of applications in manufacturing, processing and building automation. Industrial Ethernet is the general term for all applications that use the Ethernet standard to network devices used in industrial automation.

CONEC Hybrid connectors soon to be certified according to IEC standard 61076-2-118. For conventional wiring of motors, servo-drives or linear units / drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.

CONEC Hybrid connectors soon to be certified according to IEC standard 61076-2-118. For conventional wiring of motors, servo-drives or linear units/drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.