Results for
SCHMITTER HYDRAULIK GMBH
Germany
wiring connection box for tube covered wiring (corrugated hose connection possible) ADR / GGVSE - qualified description: water resistant plastic case with removable waterlabyrinth, IP 65 ... Category Electrical equippment for vehicles / Wiring connection boxes / 16-time Product number supplier 777690
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
wiring connection box for tube covered wiring (corrugated hose connection possible) ADR / GGVSE - qualified description: water resistant plastic case with removable waterlabyrinth, IP 65 ... Category Electrical equippment for vehicles / Wiring connection boxes / 16-time Product number supplier 777690
Request for a quoteFRIEDR. FREEK GMBH
Germany
Ceramic Insulated (Band) Heaters are predestined for high-temperature applications beyond 450 °C, for example for pipe heating in process heat technology, especially when gases are involved. Ceramic insulated sectional surface heating elements are also brought into action where a heat storage capacity is needed, as in hot plates the case. With the heating surface of ceramic flat heaters being composed by small-limbed ceramic elements with aligned holes in the centre for the resistance coils to be fed through, ceramic sectional heating mats are also applicable for bent or cylindric surfaces. Like Micanite insulated flat heating elements also Ceramic insulated elements can receive a metal sheath. The latter provides additional protection against mechanical load and allows for attaching connection boxes. Another advantage is the easy installation by means of mounting holes in the metal cladding.
Request for a quoteFLUKE PROCESS INSTRUMENTS GMBH
Germany
The Raytek GP infrared pyrometers come with two types of rugged sensors: GPR and GPS. They both provide standard or close focus optics and target temperature readings with 1% accuracy. In addition, the laser sighted GPS model provides alignment in hard-to-reach locations, or to small or distant targets. The GPS is capable of measuring targets as as small as 4.5 mm (.18 in) and 35:1 spot size at 200 mm (8 in) distance, for the close focus version of the sensor. The GPS targets temperatures from -18 to 540ºC (0 to 1000ºF) with 1% accuracy, and has a standard optical D:S ratio of 50:1. The GPS integrated coaxial Class 2 laser is connected to the remote activation switch box via the included 4 m (13 ft) cable. An additional 8 m (26 ft) of cable is also included to connect the switch box to the GP monitor.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Floor socket 3203E with connection module made of stainless steel, polished, with hinged cover. Can be used as a desk connection panel or floor box. The hinged cover also closes when the plugs are inserted. The equipment rack can be removed for assembly. Particularly suitable for work surfaces, exhibition areas, etc. Further equipment variants on request. The frame and the cover are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container * IBC connection: S60 x 6 Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Easy to install * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
Request for a quoteEPP ENERGY PEAK POWER GMBH
Germany
Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller.
Request for a quoteEPP ENERGY PEAK POWER GMBH
Germany
Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller.
Request for a quoteEPP ENERGY PEAK POWER GMBH
Germany
Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
Technical information The Z+F WireDancer is an unrolling aid for wires from cardboard packaging or coils from different manufacturers and is therefore an ideal accessory for any cable production. Unwinding devices are key players in streamlining material handling during cable assembly. Tailored to efficiently dispense cable reels, these devices contribute to heightened precision and productivity. Central output of the wires Unrolling kit „Coils“ enables processing of cable reels in loose form (coils) Integrated magnets ensure easy fixation in the cardboard box Connecting to any processing devices (manual, semi-automatic or fully automatic processing) Easy placement of the Z+F WireDancer in different carton sizes
Request for a quoteMICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG
Germany
At its eight outputs the µCAN.8.pwm-BOX provides pulse width modulated signals (PWM) within a range of 0% to 100% for controlling of actuators (valves etc.). The outlets are overload and short circuit protected. The µCAN.8.pwm-BOX is connected with the central control unit via CAN bus.
Request for a quoteMP MEBLE POPLAWSCY
Poland
LUXO is a combination of great practicality, spaciousness and comfort, combined with an elegant and simple design. Different combinations are made for a breed ladder, the available configurations are for the collection. It starts with an armchair and on the other edge there is a U-shaped shoe bench. Most combinations include a connection and a gift box. The cabinets offer a lot of practicality, comfort for the legs and a new look of the interior with LUXO inside.
Request for a quoteSUPERPRINT ART GROUP SRL
Romania
Portable, lightweight and easy to install LED light box stand - an absolute revolution in the world of portable light boxes and illuminated stands. The frame has integrated LED bulbs and does not require additional assembly, except for a simple connection of 4 elements of the structure, without any tools. Folded feet guarantee the stability of the light box and several dozen LED bulbs guarantee an amazing effect of the brilliant dye-sub printed graphics. The lightweight double sided frame is entirely made of anodised aluminum with a weight of only 8 kg. The set includes a transport case made of thick cardboard. The graphics are printed on the fabric and mounted with a silicone edge on the frame. The portable LED light boxes can be connected with each other, creating walls of any length (connectors for connecting LED Boxes are included in the set). The product is CE certified.
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Contactless voltage tester with flashlight • For AC • With voltage field sensor for non-contact detection of alternating currents with visual indicator (red LED), voltage range 90 - 1000 V, e.g. in cable connections, wall sockets, junction boxes, circuit breakers & fuses and many more • Integrated flashlight for measuring point illumination • Pushbutton for switching on, with self-test and visual "ready" lamp (white LED) • Device complies with the EN61010-1 standard • Measurement category CAT III / 300V • Compatible with all pliers & cutters with SoftGripp handles • With eyelet for securing to e.g. lanyard • Housing made of made of plastic • Batteries included • Read operating instructions before commissioning
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ZBUDUJPRZYCZEPE.PL (ZPTRAILERS)
Poland
External electrical box with power connection Internal electrical distributor with fuses 3 pieces – potentiometer (speed controller) Double switch Simple switch Single socket Double sockets ADDITIONAL ELEMENTS Door with marking Women's/men's toilet Space Technical room with hydraulics HYDRAULICS 3 pieces. Bath fitting 4 pcs. Toilet 4 Stk. Urinal Hydraulic parts Pressurized water pump Electric water heater
Request for a quoteZBUDUJPRZYCZEPE.PL (ZPTRAILERS)
Poland
External electrical box with power connection Internal electrical distributor with fuses 3 pieces – potentiometer (speed controller) Double switch Simple switch Single socket Double sockets DOMESTIC APPLIANCES Refrigerator Induction hob microwave kitchen sink extractor hood FURNITURE Kitchen installation Wardrobe Wall cupboards drawers royal countertop Table with chairs
Request for a quoteZBUDUJPRZYCZEPE.PL (ZPTRAILERS)
Poland
External electrical box with power connection Internal electrical distributor with fuses 3 pieces – potentiometer (speed controller) Double switch Simple switch Single socket Double sockets DOMESTIC APPLIANCES Refrigerator Induction hob microwave kitchen sink extractor hood washing machine
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
TRAPChecker is an ultrasound solution designed to assess the condition of steam traps and valves. Focused Inefficient steam systems waste energy and impact product quality. TRAPChecker is an ultrasound solution focused on finding failed steam traps. It works on every style of trap and failure mode. Simple TRAPChecker is so easy to use. Simply open the box, connect the sensor, and hear the difference between a good and bad steam trap. Its vibrant colour display offers repeatable, accurate, digital measurements. Affordable As much as 40% of your steam traps could be operating in a failed state. The low entry cost of TRAPChecker and the high cost of energy, could see your investment recovered the first time you use it. The TRAPChecker detects internal turbulence by defective steam traps and passing valves. Designed to work with SDT’s RS2 Needle Contact Sensor.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
LUBEChecker is an ultrasound solution designed to optimize bearing lubrication. Focused Poor lubrication practices are a leading cause of bearing failure. LUBEChecker is an ultrasound solution focused on optimizing grease replenishment. It is the perfect companion for performing lubrication on condition based intervals. Simple LUBEChecker is so easy to use. Simply open the box, connect it to your grease gun, and hear the difference. Its vibrant colour display offers repeatable, accurate, digital measurements that guide you to a precision result every time. Affordable Failed bearings and excessive grease consumption gnaw away at your bottom line. LUBEChecker is the affordable solution. Built with SDT quality, it’s offered at a price that makes you want to Hear More.
Request for a quoteSB-TRADING (BVBA)_M
Belgium
Compressor Weight : 2kg, 4kg, 6kg, 8kg, 10kg, and 12kg More Details : 220-240 v 50 or 60 hz. Cooling capacity: 90-190 w displ Size : 5.99 -12.53 cm3 Purity: 99.98% copper inside with connection box.
Request for a quoteSB-TRADING (BVBA)_M
Belgium
Used Electric Motor scrap, Fridge and AC Compressor Scrap, Aluminium Engine scrap, Lead Battery Scrap, Paper Scrap, etc; Drained Copper Compressor – Fridges/AC (RAINS per ISRI Specifications). Our copper content on 99.97 % Fridge/AC Compressor Scraps We sell Fridge/AC Compressor Scraps at a very competitive market price. detailed Specifications : Compressor Weight : 2kg, 4kg, 6kg, 8kg, 10kg, and 12kg More Details: 220-240 v 50 or 60 Hz. Cooling capacity: 90-190 w displ Size : 5.99 -12.53 cm3 Purity: 99.98% copper inside with connection box Aluminum Engine Block Scrap Pb (Min): 99% Alloy Or Not: Non-alloy Material: Lead Drained Used Electric Motor Scrap (RAINS per ISRI Specifications) Motor Scrap: 99.97 % Grade: A Type: All kinds of Motor Scrap Fe Content: HMS Fe Content (%): 100%)
Request for a quoteERGOSWISS AG
Switzerland
The lifting column for industrial and assembly tables The lifting column SQ consists of a colorless anodized aluminium profile with a cross-section 45x45 mm. The stainless steel tube is guided in a plastic bushing and is moved by a spindle drive. Up to four lifting columns can be connected to a control box and operated synchronously. There are T-slots on 2 sides of the leg (width 8mm). These allow the mounting of crossbars and attachments along the entire length of the column. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates
Request for a quoteERGOSWISS AG
Switzerland
Slim and compact The leg SM consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each leg has an internal motor that drives the threaded spindles. Up to 3 spindle Lifting legs can be connected to one control box and are operated synchronous. The T-slots on 3 sides (width 8 mm) allow the addition of crossbars, shelves, attachments and mountings along the entire length of the leg. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates
Request for a quoteERGOSWISS AG
Switzerland
High loads with small dimension The housing of the linear units SLA and SLG are made out of colorless anodized aluminium profiles with dimensions 35x35 mm (SLA) or 45x45 mm (SLG). Up to 4 linear units can be connected to one control box and are operated synchronous with a hand switch. The systems SLA and SLG are used in applications which need ergonomic height adjustable work surfaces. Especially existing work stations can be retrofitted with linear units. The dimensions 35x35 mm and 45x45 mm fit perfectly in steel profiles 40x40 mm or 50x50 mm, which are often used as carriers and legs for work stations. Compared to to the linear unit SLA, the SLG can withstand higher bending moments and is more stable. We recommend the SLA and SLG linear unit for industry, furniture and catering. The following accessories are available: mounting plates adjustable rubber foots aluminum feet castors tube fitting (only for SLA)
Request for a quoteERGOSWISS AG
Switzerland
High loads with small dimension The housing of the linear units SLA and SLG are made out of colorless anodized aluminium profiles with dimensions 35x35 mm (SLA) or 45x45 mm (SLG). Up to 4 linear units can be connected to one control box and are operated synchronous with a hand switch. The systems SLA and SLG are used in applications which need ergonomic height adjustable work surfaces. Especially existing work stations can be retrofitted with linear units. The dimensions 35x35 mm and 45x45 mm fit perfectly in steel profiles 40x40 mm or 50x50 mm, which are often used as carriers and legs for work stations. Compared to to the linear unit SLA, the SLG can withstand higher bending moments and is more stable. We recommend the SLA and SLG linear unit for industry, furniture and catering. The following accessories are available: mounting plates adjustable rubber foots aluminum feet castors tube fitting (only for SLA)
Request for a quoteSAMES KREMLIN
France
The AP 1000 resistivohmeter is specially designed to quickly and accurately measure the resistivity (in ohm.meter) of the paints & clear coats applied by electrostatics. The resistivity is a quite significant factor The must-have tool for electrostatic paint and clear coat application Provides facts and data to help paint optimization for all users of electrostatic painting (in laboratories, sub-suppliers control departments, integrated paint process). This device is equipped with: A metallic box, an open cover, a control plate which display the following: A reading of the measure on 3 separate scales The red, black, or blue color buttons allow selecting the matching measure scale & corresponding to a resistivity range of the measured paint A probe connected to the box by a cable (resistant to the usual solvents) When the device is not used, the probe takes place into a housing box. WARNING: this device must be used in non...
Request for a quoteResults for
Connection boxes - Import exportNumber of results
61 ProductsCountries
Category