Connection boxes - Import export

Ceramic Insulated (Band) Heaters are predestined for high-temperature applications beyond 450 °C, for example for pipe heating in process heat technology, especially when gases are involved. Ceramic insulated sectional surface heating elements are also brought into action where a heat storage capacity is needed, as in hot plates the case. With the heating surface of ceramic flat heaters being composed by small-limbed ceramic elements with aligned holes in the centre for the resistance coils to be fed through, ceramic sectional heating mats are also applicable for bent or cylindric surfaces. Like Micanite insulated flat heating elements also Ceramic insulated elements can receive a metal sheath. The latter provides additional protection against mechanical load and allows for attaching connection boxes. Another advantage is the easy installation by means of mounting holes in the metal cladding.

The Raytek GP infrared pyrometers come with two types of rugged sensors: GPR and GPS. They both provide standard or close focus optics and target temperature readings with 1% accuracy. In addition, the laser sighted GPS model provides alignment in hard-to-reach locations, or to small or distant targets. The GPS is capable of measuring targets as as small as 4.5 mm (.18 in) and 35:1 spot size at 200 mm (8 in) distance, for the close focus version of the sensor. The GPS targets temperatures from -18 to 540ºC (0 to 1000ºF) with 1% accuracy, and has a standard optical D:S ratio of 50:1. The GPS integrated coaxial Class 2 laser is connected to the remote activation switch box via the included 4 m (13 ft) cable. An additional 8 m (26 ft) of cable is also included to connect the switch box to the GP monitor.

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection

Floor socket 3203E with connection module made of stainless steel, polished, with hinged cover. Can be used as a desk connection panel or floor box. The hinged cover also closes when the plugs are inserted. The equipment rack can be removed for assembly. Particularly suitable for work surfaces, exhibition areas, etc. Further equipment variants on request. The frame and the cover are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.

The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container * IBC connection: S60 x 6 Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Easy to install * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

Technical information The Z+F WireDancer is an unrolling aid for wires from cardboard packaging or coils from different manufacturers and is therefore an ideal accessory for any cable production. Unwinding devices are key players in streamlining material handling during cable assembly. Tailored to efficiently dispense cable reels, these devices contribute to heightened precision and productivity. Central output of the wires Unrolling kit „Coils“ enables processing of cable reels in loose form (coils) Integrated magnets ensure easy fixation in the cardboard box Connecting to any processing devices (manual, semi-automatic or fully automatic processing) Easy placement of the Z+F WireDancer in different carton sizes

At its eight outputs the µCAN.8.pwm-BOX provides pulse width modulated signals (PWM) within a range of 0% to 100% for controlling of actuators (valves etc.). The outlets are overload and short circuit protected. The µCAN.8.pwm-BOX is connected with the central control unit via CAN bus.

LUXO is a combination of great practicality, spaciousness and comfort, combined with an elegant and simple design. Different combinations are made for a breed ladder, the available configurations are for the collection. It starts with an armchair and on the other edge there is a U-shaped shoe bench. Most combinations include a connection and a gift box. The cabinets offer a lot of practicality, comfort for the legs and a new look of the interior with LUXO inside.

Portable, lightweight and easy to install LED light box stand - an absolute revolution in the world of portable light boxes and illuminated stands. The frame has integrated LED bulbs and does not require additional assembly, except for a simple connection of 4 elements of the structure, without any tools. Folded feet guarantee the stability of the light box and several dozen LED bulbs guarantee an amazing effect of the brilliant dye-sub printed graphics. The lightweight double sided frame is entirely made of anodised aluminum with a weight of only 8 kg. The set includes a transport case made of thick cardboard. The graphics are printed on the fabric and mounted with a silicone edge on the frame. The portable LED light boxes can be connected with each other, creating walls of any length (connectors for connecting LED Boxes are included in the set). The product is CE certified.

• Contactless voltage tester with flashlight • For AC • With voltage field sensor for non-contact detection of alternating currents with visual indicator (red LED), voltage range 90 - 1000 V, e.g. in cable connections, wall sockets, junction boxes, circuit breakers & fuses and many more • Integrated flashlight for measuring point illumination • Pushbutton for switching on, with self-test and visual "ready" lamp (white LED) • Device complies with the EN61010-1 standard • Measurement category CAT III / 300V • Compatible with all pliers & cutters with SoftGripp handles • With eyelet for securing to e.g. lanyard • Housing made of made of plastic • Batteries included • Read operating instructions before commissioning

External electrical box with power connection Internal distribution box with fuses 3 pieces – potentiometer (speed controller) Double switch Simple switch Single socket Double sockets DOMESTIC APPLIANCES Refrigerator induction plate microwave Sink extractor hood washing machine FURNITURE kitchen furniture Wardrobe Wall cupboards drawers royal countertop Table with chairs TV cabinet Bed: 2x single (single person)

External electrical box with power connection Internal electrical distributor with fuses 3 pieces – potentiometer (speed controller) Double switch Simple switch Single socket Double sockets ADDITIONAL ELEMENTS Door with marking Women's/men's toilet Space Technical room with hydraulics HYDRAULICS 3 pieces. Bath fitting 4 pcs. Toilet 4 Stk. Urinal Hydraulic parts Pressurized water pump Electric water heater

External electrical box with power connection Internal electrical distributor with fuses 3 pieces – potentiometer (speed controller) Double switch Simple switch Single socket Double sockets DOMESTIC APPLIANCES Refrigerator Induction hob microwave kitchen sink extractor hood FURNITURE Kitchen installation Wardrobe Wall cupboards drawers royal countertop Table with chairs

External electrical box with power connection Internal electrical distributor with fuses 3 pieces – potentiometer (speed controller) Double switch Simple switch Single socket Double sockets DOMESTIC APPLIANCES Refrigerator Induction hob microwave kitchen sink extractor hood washing machine

LUBEChecker is an ultrasound solution designed to optimize bearing lubrication. Focused Poor lubrication practices are a leading cause of bearing failure. LUBEChecker is an ultrasound solution focused on optimizing grease replenishment. It is the perfect companion for performing lubrication on condition based intervals. Simple LUBEChecker is so easy to use. Simply open the box, connect it to your grease gun, and hear the difference. Its vibrant colour display offers repeatable, accurate, digital measurements that guide you to a precision result every time. Affordable Failed bearings and excessive grease consumption gnaw away at your bottom line. LUBEChecker is the affordable solution. Built with SDT quality, it’s offered at a price that makes you want to Hear More.

High loads with small dimension The housing of the linear units SLA and SLG are made out of colorless anodized aluminium profiles with dimensions 35x35 mm (SLA) or 45x45 mm (SLG). Up to 4 linear units can be connected to one control box and are operated synchronous with a hand switch. The systems SLA and SLG are used in applications which need ergonomic height adjustable work surfaces. Especially existing work stations can be retrofitted with linear units. The dimensions 35x35 mm and 45x45 mm fit perfectly in steel profiles 40x40 mm or 50x50 mm, which are often used as carriers and legs for work stations. Compared to to the linear unit SLA, the SLG can withstand higher bending moments and is more stable. We recommend the SLA and SLG linear unit for industry, furniture and catering. The following accessories are available: mounting plates adjustable rubber foots aluminum feet castors tube fitting (only for SLA)

The lifting column for industrial and assembly tables The lifting column SQ consists of a colorless anodized aluminium profile with a cross-section 45x45 mm. The stainless steel tube is guided in a plastic bushing and is moved by a spindle drive. Up to four lifting columns can be connected to a control box and operated synchronously. There are T-slots on 2 sides of the leg (width 8mm). These allow the mounting of crossbars and attachments along the entire length of the column. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

Slim and compact The leg SM consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each leg has an internal motor that drives the threaded spindles. Up to 3 spindle Lifting legs can be connected to one control box and are operated synchronous. The T-slots on 3 sides (width 8 mm) allow the addition of crossbars, shelves, attachments and mountings along the entire length of the leg. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

High loads with small dimension The housing of the linear units SLA and SLG are made out of colorless anodized aluminium profiles with dimensions 35x35 mm (SLA) or 45x45 mm (SLG). Up to 4 linear units can be connected to one control box and are operated synchronous with a hand switch. The systems SLA and SLG are used in applications which need ergonomic height adjustable work surfaces. Especially existing work stations can be retrofitted with linear units. The dimensions 35x35 mm and 45x45 mm fit perfectly in steel profiles 40x40 mm or 50x50 mm, which are often used as carriers and legs for work stations. Compared to to the linear unit SLA, the SLG can withstand higher bending moments and is more stable. We recommend the SLA and SLG linear unit for industry, furniture and catering. The following accessories are available: mounting plates adjustable rubber foots aluminum feet castors tube fitting (only for SLA)

The AP 1000 resistivohmeter is specially designed to quickly and accurately measure the resistivity (in ohm.meter) of the paints & clear coats applied by electrostatics. The resistivity is a quite significant factor The must-have tool for electrostatic paint and clear coat application Provides facts and data to help paint optimization for all users of electrostatic painting (in laboratories, sub-suppliers control departments, integrated paint process). This device is equipped with: A metallic box, an open cover, a control plate which display the following: A reading of the measure on 3 separate scales The red, black, or blue color buttons allow selecting the matching measure scale & corresponding to a resistivity range of the measured paint A probe connected to the box by a cable (resistant to the usual solvents) When the device is not used, the probe takes place into a housing box. WARNING: this device must be used in non...

PE-FOAM SKIN INSULATED, STAR-QUADS, WITH REINFORCED SHEATH The cable is designed for use as railway signalling cable, preferable for the connection of railway connection boxes

The design includes a box for connecting FTP and standard camera wires as well as a bracket for attaching input cable. The camcorder is attached directly to the box with self-tapping screws.

“Powersonic” is a type of KLN transducer systems with a particularly good cleaning effect and especially solid design. Thus we give full guarantee for up to 12.000 hours in max. 3 years. Submersible transducers are ultrasonic transducer systems in hermetically welded metal housing, inside of which piezoceramic transducer elements are incorporated. They are arranged at the bottom or at the sides of cleaning tanks. The HF current supply is realized via a power supply line which is lead via connection box at the back, a pipe elbow or a flexible metal mesh hose. Various sizes of submersible transducers make possible to use them in operating frequencies differing from 20, 25, 30, 40 up to 132 kHz.

The red ballotin gift box, decorated with a satin ribbon and bow contains 14 Belgian chocolates of various shapes made of milk, white and dark chocolate and in combination with delicious hazelnut nougat, truffle cream, marzipan, and caramel create a perfect connection. An elegant red box with gold elements is an ideal choice. Dark chocolate contains cocoa solids 50% minimum. Milk chocolate contains cocoa solids 33%, milk solids 14% minimum. White chocolate contains cocoa solids 26%, milk solids 22% minimum.

The red ballotin gift box, decorated with a satin ribbon and bow contains 14 Belgian chocolates of various shapes made of milk, white and dark chocolate and in combination with delicious hazelnut nougat, truffle cream, marzipan, and caramel create a perfect connection. An elegant red box with gold elements is an ideal choice. Dark chocolate contains cocoa solids 50% minimum. Milk chocolate contains cocoa solids 33%, milk solids 14% minimum. White chocolate contains cocoa solids 26%, milk solids 22% minimum.

SANHA-Box for dry-wall construction, radiator installation. The SANHA-Box greatly reduces labour in dry-lining applications. Cavities, noise insulation or stability are real challenges. The SANHA-Box allows robust and very precise installation of all pipes, fittings, etc. including mounting frames and cross-members

SANHA-Box for dry-wall construction, with two bath and shower connections