Connection boxes - Import export

wiring connection box for tube covered wiring (corrugated hose connection possible) ADR / GGVSE - qualified description: water resistant plastic case with removable waterlabyrinth, IP 65 ... Category Electrical equippment for vehicles / Wiring connection boxes / 16-time Product number supplier 777690

wiring connection box for tube covered wiring (corrugated hose connection possible) ADR / GGVSE - qualified description: water resistant plastic case with removable waterlabyrinth, IP 65 ... Category Electrical equippment for vehicles / Wiring connection boxes / 16-time Product number supplier 777690

Ceramic Insulated (Band) Heaters are predestined for high-temperature applications beyond 450 °C, for example for pipe heating in process heat technology, especially when gases are involved. Ceramic insulated sectional surface heating elements are also brought into action where a heat storage capacity is needed, as in hot plates the case. With the heating surface of ceramic flat heaters being composed by small-limbed ceramic elements with aligned holes in the centre for the resistance coils to be fed through, ceramic sectional heating mats are also applicable for bent or cylindric surfaces. Like Micanite insulated flat heating elements also Ceramic insulated elements can receive a metal sheath. The latter provides additional protection against mechanical load and allows for attaching connection boxes. Another advantage is the easy installation by means of mounting holes in the metal cladding.

The Raytek GP infrared pyrometers come with two types of rugged sensors: GPR and GPS. They both provide standard or close focus optics and target temperature readings with 1% accuracy. In addition, the laser sighted GPS model provides alignment in hard-to-reach locations, or to small or distant targets. The GPS is capable of measuring targets as as small as 4.5 mm (.18 in) and 35:1 spot size at 200 mm (8 in) distance, for the close focus version of the sensor. The GPS targets temperatures from -18 to 540ºC (0 to 1000ºF) with 1% accuracy, and has a standard optical D:S ratio of 50:1. The GPS integrated coaxial Class 2 laser is connected to the remote activation switch box via the included 4 m (13 ft) cable. An additional 8 m (26 ft) of cable is also included to connect the switch box to the GP monitor.

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection

Floor socket 3203E with connection module made of stainless steel, polished, with hinged cover. Can be used as a desk connection panel or floor box. The hinged cover also closes when the plugs are inserted. The equipment rack can be removed for assembly. Particularly suitable for work surfaces, exhibition areas, etc. Further equipment variants on request. The frame and the cover are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller.

The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container * IBC connection: S60 x 6 Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Easy to install * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller.

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

Technical information The Z+F WireDancer is an unrolling aid for wires from cardboard packaging or coils from different manufacturers and is therefore an ideal accessory for any cable production. Unwinding devices are key players in streamlining material handling during cable assembly. Tailored to efficiently dispense cable reels, these devices contribute to heightened precision and productivity. Central output of the wires Unrolling kit „Coils“ enables processing of cable reels in loose form (coils) Integrated magnets ensure easy fixation in the cardboard box Connecting to any processing devices (manual, semi-automatic or fully automatic processing) Easy placement of the Z+F WireDancer in different carton sizes

At its eight outputs the µCAN.8.pwm-BOX provides pulse width modulated signals (PWM) within a range of 0% to 100% for controlling of actuators (valves etc.). The outlets are overload and short circuit protected. The µCAN.8.pwm-BOX is connected with the central control unit via CAN bus.

• Contactless voltage tester with flashlight • For AC • With voltage field sensor for non-contact detection of alternating currents with visual indicator (red LED), voltage range 90 - 1000 V, e.g. in cable connections, wall sockets, junction boxes, circuit breakers & fuses and many more • Integrated flashlight for measuring point illumination • Pushbutton for switching on, with self-test and visual "ready" lamp (white LED) • Device complies with the EN61010-1 standard • Measurement category CAT III / 300V • Compatible with all pliers & cutters with SoftGripp handles • With eyelet for securing to e.g. lanyard • Housing made of made of plastic • Batteries included • Read operating instructions before commissioning

“Powersonic” is a type of KLN transducer systems with a particularly good cleaning effect and especially solid design. Thus we give full guarantee for up to 12.000 hours in max. 3 years. Submersible transducers are ultrasonic transducer systems in hermetically welded metal housing, inside of which piezoceramic transducer elements are incorporated. They are arranged at the bottom or at the sides of cleaning tanks. The HF current supply is realized via a power supply line which is lead via connection box at the back, a pipe elbow or a flexible metal mesh hose. Various sizes of submersible transducers make possible to use them in operating frequencies differing from 20, 25, 30, 40 up to 132 kHz.

SANHA-Box for dry-wall construction, radiator installation. The SANHA-Box greatly reduces labour in dry-lining applications. Cavities, noise insulation or stability are real challenges. The SANHA-Box allows robust and very precise installation of all pipes, fittings, etc. including mounting frames and cross-members

SANHA-Box for dry-wall construction, with two bath and shower connections

Automate your feed axes using the SeGMo positioning system from Lenord+Bauer! A simple integration into your plant control system enables you to boost system efficiency in format changes and save time and money. The SeGMo drives are complete mechatronic systems with a batteryless multiturn absolute rotary encoder, gear and motor as well as integrated power and control electronics. • Intelligent connection box in modular design • Two housing variants with 4/9 slots available • Module combination for control of up to 17 axes • Conveniently configurable via SeGMoSupport Tool

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications! The practical SANHA-Box range comes in many versions: Preconfigured boxes are available for wash basins and sinks, through baths and showers, and onto water meter connections. All SANHA-Boxes are also available with already isolated multilayer plastic pipes. A complete overview of our product portfolio and the complete range of accessories can be found in our brochure – or simply call us at +44 1628 819245!

Practical, time-saving foam installation box with preconfigured multilayer pipe and fittings / connections for radiators. For masonry walls. Distance between flow and return flow 50 mm, with thermal and sound insulation as well as condensate protection. 2 MultiFit-Flex multilayer pipe connections dimension 16 mm. Box dimension: 120 x 95 x 50 mm (length x width w/o plate/width with plate x depth)

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications! The practical SANHA-Box range comes in many versions: Preconfigured boxes are available for wash basins and sinks, through baths and showers, and onto water meter connections. All SANHA-Boxes are also available with already isolated multilayer plastic pipes. A complete overview of our product portfolio and the complete range of accessories can be found in our brochure – or simply call us at +44 1628 819245!

With the FPM (once F&G) explosion-proof low voltage motors, we offer you a complete programme of safe, reliable, durable and economically viable motors in protection IP 54 to IP 65, and Ex d and Ex de. All motors are also available as special versions to suit your individual requirements. The quality control system which is certified to DIN/ISO 9000, guarantees a consistent high level of quality. But there''s even more: As an environmentally friendly company, ATB Motorentechnik GmbH is also certified according to the EU-Enviornmental Audit (EEC 1836/93). We supply from our existing stock Kalefeld F&G- flameproof motors / hazardous motors Ex de IIC T4 High Efficiency IE2 in frame size 80 - 200 ( 2 and 4 -poles ) 0, 75 - 37 kW. All motors on stock are with Ptc thermistors. Other frame sizes and versions are available within 6-8 weeks after receipt of order . FPM Explosion Proof Motors / hazardous motors available in IE1 and IE2 High Efficiency Low Voltage Motors Low-noise three-phase a.c. motor This version is particularly low-noise. The split terminal box enables easy connection. Performance range 0,06 – 800 kW Ex-proof II 2 G Ex de IIC T4

The Assfalg Battery Electro-Permanent Lifting Magnetic Beam EPMBL has a compact design. Due to the integrated rechargeable battery box, a power connection is no longer required. The EPM Battery Magnetic Lifting Beam is operated by remote control. The load lifting beam with a max. load of 1,500 kg is equipped with magnetic modules and can thus safely move sheet metal formats from a minimum length of 500 mm to a maximum length of 4,000 mm.