Blind hole - Import export

The self clinch standoff is an element in which the head is fully concealed in the sheet metal; it offers high torsion and tensile strength characteristics. The application is so aesthetically sound that no further finishing work is required after installation. It is particularly suitable for the electronics industry This self-clinching standoff is part of our line of self-clinching inserts. All Clinch inserts are installed using a simple punch During installation process, the fastener is placed in an appropriately sized hole and then compressed by means of a punch, applyinng only sufficient pressure to squeeze the hexagon head into the parent sheet. The sheet metal experiences plastic deformation and locks the fastener firmly to itself. After installation the head should be flush with the sheet. So the result is aesthetically perfect and hexagon head provides high tensile as well as torsional strength

Type H Helicoil HSSE tap for inch sized UNF thread inserts. Compatible with all types of helicoidal thread inserts For blind holes and manual or machine use. Spiral flutes of the tap extract chips from blind holes which allows to avoid stuffing Complies with DIN 81402 For better results, you may first use a roughing tap to prepare a hole Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

Extremely resistant to external influences. Solid or blind-hole hollow shaft, max. Ø 20 mm. Adaptation to various measurement distances owing to a wide range of gear ratios. Integrated slip clutch to protect the potentiometer. Potentiometer or power output. IP65 protection category. Up to 3 cam-operated switch outputs, freely adjustable.

Extremely resistant to external influences. Solid or blind-hole hollow shaft, max. Ø 20 mm. Adaptation to various measurement distances owing to a wide range of gear ratios. Integrated slip clutch to protect the potentiometer. Potentiometer, power or voltage output. IP65 protection category.

Tapped cylindrical pins are chiefly used in blind holes. The milled flat prevents air compression in blind holes. The tapping makes it possible to use the extractor 03328.

With solid or blind hole shaft Profile GP04/1: Extremely resistant to external influences Solid or blind-hole hollow shaft, max. Ø 20 mm Adaptation to various measurement distances owing to a wide range of gear ratios Integrated slip clutch to protect the potentiometer Potentiometer, power or voltage output IP65 protection category

Black thermoplastic. Steel grade 5.8 or stainless steel 1.4305. Version: Metal parts trivalent blue passivated steel or bright stainless steel. Note: Star grips with projecting steel bush and blind hole or female thread are especially suited for cross pinning. Drawing reference: Form H: bush with blind hole Form K: tapped bush Form L: external thread

Stainless steel 1.4308. Grub screw stainless steel 1.4305. Pin stainless steel 1.4310. Version: Ground and polished or blasted. Grub screw and pin bright. Drawing reference: Form B: drilled through Form C: blind hole Form D: tapped and counterbored Form E: tapped blind hole Form L: external thread

The receiver bush is for quick and safe insertion of ball operated lifting pins. They offer an easy and reliable installation in a variety of lifting materials. Also for use with thin walled materials and blind holes. They are corrosion resistant with low wearing.

Profile GP44: Extremely resistant to external influences Solid or blind-hole hollow shaft, max. Ø 20 mm Adaptation to various measurement distances owing to a wide range of gear ratios Integrated slip clutch to protect the potentiometer Potentiometer or power output IP65 protection category Up to 3 cam-operated switch outputs, freely adjustable

It is recommended that the cam lever is in a vertical position when the collet is positioned in the bore. The function of the clamping system was tested in bores with tolerance H7. All values for retaining force are guide values and are given without safety factor. The suitability for the respective application must be checked by the user. Advantages: Two components can be joined together without tools. The components are perfectly centred in the clamped state. The compact design means that the mandrel collet with cam lever can even be used in blind holes. There are no specific dimensional requirements for the holes. Additionally, the surfaces and design do not need to have any specific properties. Functional principle: The clamping system is inserted in the hole in the open state. At the beginning of the locking process, the mandrel collet expands and clamps itself in the lower component. The integrated disc spring assembly creates a positive down force

The 8524 precision tension & compression load cell is a versatile sensor for highly accurate load measurements in diverse applications. Optimum measurement quality is achieved with the load cell mounted on a flat, hard and polished contact surface. This requirement does not apply to small measurement ranges of up to 0 ... 2 kN because three knife-edge bearings ensure that the sensor is seated securely. Our brochure „Load Cells“ explains how you can design parasitic loads out of your mechanical system. Through-holes in the outer flange are used for fastening the 8524 sensor to the system structure. The load is applied via the central blind threaded hole or optionally via a load button. Alternatively, a pull plate and even rod end bearings, if desired, can be attached to the sensor for equally easy measurement of purely tensile loads, for instance in Bowden cables or chains. The 8524 sensor is designed to measure static, quasi-static and dynamic compressive and/or tensile loads.

A wide grip range: A single PolyGrip® blind rivet can replace to up to fi ve different dimensions of DIN standard blind rivets. • Outstanding hole fi lling capability: The rivet body expands radially during the setting process and compensates hole tolerances, centering deviations and differences in diameter, thus always building up a playfree and tight joint. • Safe rest mandrel locking: PolyGrip® blind rivets neither generate rattling noises due to free moving rest mandrels nor do they allow the risk of loss of the rest mandrel. • Splash waterproof are the PolyGrip® blind rivets under certain conditions too. Hole fi lling and rest mandrel locking make of them a real alternative to closed end rivets when it is essential to prevent water fl owing through the whole joint and not only through the rivet body. • A large closing head: for a high tensile and unbuttoning resistance.

Grooved blind rivets are suitable for riveting in blind holes in soft materials. They are used in the furniture industry, in interior fittings, in the wood and plastics processing industry, in car body construction and many more. Important: Before processing the grooved blind rivets, the drill hole diameter must be determined by testing and the minimum drill hole depth must be observed.

A closed end rivet The rivet body of the GESIPA CAP ® blind rivet is absolutely air and watertight. Liquids cannot seep through, could however seep around the set rivet, if the setting hole is too large. Therefore great care must be brought to fullfi lling the hole tolerances. The GESIPA CAP ® blind rivet – The structure For technical reasons, the rivet mandrel of the GESIPA CAP ® blind rivet must be fi xed in the rivet body. However this means that the rivet body can only deform slightly during the setting process. As a result, the cap blind rivet only has marginal hole fi lling capability. However this is necessary to be able to compensate large bore-hole tolerances. The GESIPA CAP ® blind rivet – Tight connections with care The above-mentioned technical situations make careful preparation of the application imperative. The hole diameter should be as tight as possible to ensure a fl awless function in the application for a long period.

Up to 60 rivets per minute! – Endorsed by major customers! GESIPA® speed rivets are a cost-effective alternative to automation. Speed rivet technology is a joining method that requires access from only one side and which enables fast cycle times thanks to the preloaded rivets and automatic feed. Advantages • Large grip range • Reduced variation • Optimum hole filling capabilities and bearing stress • Ideally suited for transferring shear strengths with moderate clamping force • Ideal for: — LED light strips — Electronic/pcb assembly — Lightweight sheet metal structures — PC housings — Rating plates — Blind holes

The HONSEL COIL "cone" can be installed in the same way as a coil with tab. No additional or special tools are required for process-reliable installation. When the HONSEL COIL "cone" is screwed onto the installation spindle, the conical portion of the wire thread insert creates a clamping effect between the installation tool and the coil. This ensures a stable installation process into the work piece. Advantages: — tab-free and therefore optimally designed for e-mobility due to no risk of tab debris. — Shallower blind hole depths can be realized — Subsequent processes are no longer necessary (breaking and removing of the installation tab) — No thread skipping during installation — Cycle time reduction of 20-30 % per installation — No special tools required for the installation process — The installation process improves due to the conical portion

Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site

Type H Helicoil HSSE tap for inch sized UNC thread inserts. Compatible with all types of helicoidal thread inserts For blind holes and manual or machine use. Spiral flutes of the tap extract chips from blind holes which allows to avoid stuffing Complies with DIN 81402 For better results, you may first use a roughing tap to prepare a hole Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

Type H Helicoil HSSE tap for metric thread inserts. Compatible with all types of helicoidal thread inserts For blind holes and manual or machine use. Spiral flutes of the tap extract chips from blind holes which allows to avoid stuffing Complies with DIN 81402 For better results, you may first use a roughing tap to prepare a hole Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site

Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site

Screw extractor Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site

Thread pitch gauge Screw extractor Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site

Screw extractor Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site

Adjustable tap wrenches, zinc die cast: No. 1: M 1-10 | 1/16-3/8 | G 1/8 No. 2: M 4-12 | 5/32-1/2 | G 1/8 Die sctocks: 20 x 5 | 20 x 7 | 25 x 9 | 30 x 11 | 38 x 14 Tap holder ratchet: M 3-10 | M 5-12 Thread pitch gauge Screw extractor Brand: Baer Tools (Germania)

We are available for the questions about this product by phone, email or chat here on the site

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Oversized diameter 7G Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO3/7G Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Tolerance 7G – allowance for distortion caused by heat treatment. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Overlengthed (long shank) L=150 Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.