Ball bearing steels - Import export

Applications: Power transformers Distribution transformers Large generators Available sizes: Thickness: Typically in the range of 0.18mm to 0.35mm depending on the specific application requirements. Width: Generally available in widths from 500mm to 1000mm, with customized widths also available to suit specific designs and requirements. Length: Can be supplied in various lengths depending on manufacturing and installation requirements, often as coils or in sheets cut to length.

Load capacity of up to 80 kg possible

drylin® SHT-12 linear module, drylin® R hard-anodised aluminium shafts, Trapezoidal lead screw TR10x2 made of stainless steel with ball bearings, machined lead screw ends 6h9x17mm, quad blocks, aluminium shaft end support, stroke lengths in 250mm or 500mm. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

xiros® B180 FDA for the food sector B180 is already the most successful range in the xiros® family, reliable and inexpensive. Now this range becomes a low-cost solution for the food industry. All dimensions up to Ø 25 mm are also available from now on in the FDA-approved version. For this, it is enough to adapt the cage of the polymer ball bearing, as the rings are already made from FDA-compliant material. Now xirodur® B180 ball bearings with stainless steel balls can be used anywhere in the unpackaged food processing/handling area and where temperatures do not exceed 80°C. Raceways and cages made ​​of FDA approved plastics Lubricant- and maintenance-free Washable For temperatures up to 80℃ Application areas:Food and packaging technology, handling technology, medical technology, cleanroom sector. xiros® B180 FDA for the food sector B180 is already the most successful range in the xiros® family, reliable and inexpensive. Now this range becomes a low-cost solution for the food industry. All dimensions up to Ø 25 mm are also available from now on in the FDA-approved version. For this, it is enough to adapt the cage of the polymer ball bearing, as the rings are already made from FDA-compliant material. Now xirodur® B180 ball bearings with stainless steel balls can be used anywhere in the unpackaged food processing/handling area and where temperatures do not exceed 80°C. Raceways and cages made ​​of FDA approved plastics Lubricant- and maintenance-free Washable For temperatures up to 80℃ Application areas:Food and packaging technology, handling technology, medical technology, cleanroom sector.

Outer jacket stainless steel. Cage stainless steel. Balls stainless steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seals and a stainless steel cage. The bearing is secured with DIN 471/472 circlips. Linear ball bearings with doublesided seals should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts.

Shell, ballbearing steel. Cage, plastic. Balls, steel. Note With seals both ends. The linear ball bearing is secured using DIN 471 / 472 circlips. Application Suitable for applications where installation space is limited.

Steel housing. Nitrile rubber seal. Preloaded highaccuracy bearings with a 60° thrust angle. The bearings accept both radial and axial forces from both directions. Due to their preload, the angular contact ball bearings provide a high level of stiffness, excellent concentricity, precise tool positioning and repeatability. The integrated lowfriction seal effectively keeps dirt away from the bearing, thereby ensuring excellent operating safety and a long service life. The bearing friction coefficient Mrl is a reference value. The moment of inertia corresponds to that of the rotating inner ring. The limiting speeds are applicable after grease is applied. Technical data All bearings are supplied ready for mounting with lubricating grease type KE2P35 acc. to DIN 51825. Housing and shaft tolerances correspond to roundness tolerance class IT2 and perpendicularity tolerance class IT4.

Sprocket steel. Ball bearing chrome steel. Screw and nut steel. Version Sprocket teeth hardened to HRC 50, electro zincplated. Ball bearing with sealing discs 2ZC3. Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The sprocket set can be combined with all tensioning elements to form a readytoinstall chain clamp. The ball bearings are sealed both sides, permanently lubricated and maintenancefree. The sprocket can be moved on the screw and thus adapted to the chain track. With the duplex and triplex version, precision spacer sleeves ensure correct chain guidance. Rigid mounting without a tensioning element is also possible. Can also be used as an idler sprocket.

"Ball bearings with a material combination of bearing steel (inner and outer rings) and ceramic (balls) are called ‘hybrid’ ball bearings. All GMN ball bearings can be supplied as hybrid ball bearings. The material characteristics of ceramic balls in hybrid ball bearings result in significant increases in machine performance (in comparison to ball bearings using steel balls), especially under critical conditions.

Housing plastic. Ball bearing stainless steel 1.4112. Plain bearing insert POM. Bushes and grease nipple stainless steel 1.4301. Version Plain bearing insert white. Housing green. Stainless steel parts bright. Note The housings are very robust, hard wearing and shock proof. They are resistant to most alkaline solutions, weak acids (PH 49) and brines. In contrast to cast or steel housings the special plastic in these housings prevent the formation of microorganisms. Drawing reference 1) ball bearing 2) plain bearing

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

Body carbon steel. Balls roller bearing steel. Diverters plastic. Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With doublesided end seal. 4row versions with round arch profile. The profile guide rail tracks are arranged at 45° and can accept loads from all directions. High dynamic values v = 5 m/s. Applicable temperature in continuous use max. 80 °C. On request Various precision and preload classes. Drawing reference 1) ground ref. edge

Body carbon steel. Ball, ball bearing steel 1.2067. Form D: Ball with POM insert. Form H: Ball with POM insert. Form K: Ball with carbide insert. Form M has a carbide ball. Version: Body tempered and phosphated. Ball hardened. Form M ball nickel plated. Note: Self-aligning pads serve as stops, supports and thrust pads in fixture constructions. Ball secured against rotation. * Valid only if the minimum bore depth is observed. Drawing reference: Form C: with male thread, flattened ball, smooth. Form D: with male thread, flattened ball, with POM insert. Form F: with male thread, flattened ball, diamond grip. Form M: with male thread, flattened ball, with carbide insert. Form G: press fit, flattened ball, smooth. Form H: press fit, flattened ball, with POM insert. Form J: press fit, flattened ball, diamond grip. Form K: press fit, flattened ball, with carbide insert.

EZM Driveline – This is the brand name under which EZM can supply you with drawn bright steel, ground bright steel, peeled bright steel and ground-and-polished bright steel in virtually all cold-formable alloyed and carbon steel grades. Our bright steel is characterised by great dimensional accuracy and high-quality, bright surfaces. Compared to rolled and forged products, cold-drawn bright steel offers the advantage of a greater range of processing options. Of very special importance in this context is a lead-alloyed carbon steel for diesel injection pumps. The unique properties of this EZM speciality offer the perfect answer to such contradictory demands as maximum pressure resistance, on the one hand, and optimum machining properties, on the other. EZM is also a specialist for the processing of antifriction bearing steel/ball bearing steel, as well as alloyed high-grade structural steel. Nozzle body Nozzle body Injector body Injection nozzle DVTD_2V_Section >> Current...

EZM Driveline – This is the brand name under which EZM can supply you with drawn bright steel, ground bright steel, peeled bright steel and ground-and-polished bright steel in virtually all cold-formable alloyed and carbon steel grades. Our bright steel is characterised by great dimensional accuracy and high-quality, bright surfaces. Compared to rolled and forged products, cold-drawn bright steel offers the advantage of a greater range of processing options. Of very special importance in this context is a lead-alloyed carbon steel for diesel injection pumps. The unique properties of this EZM speciality offer the perfect answer to such contradictory demands as maximum pressure resistance, on the one hand, and optimum machining properties, on the other. EZM is also a specialist for the processing of antifriction bearing steel/ball bearing steel, as well as alloyed high-grade structural steel. Nozzle body Nozzle body Injector body Injection nozzle DVTD_2V_Section >> Current...

EZM Driveline – This is the brand name under which EZM can supply you with drawn bright steel, ground bright steel, peeled bright steel and ground-and-polished bright steel in virtually all cold-formable alloyed and carbon steel grades. Our bright steel is characterised by great dimensional accuracy and high-quality, bright surfaces. Compared to rolled and forged products, cold-drawn bright steel offers the advantage of a greater range of processing options. Of very special importance in this context is a lead-alloyed carbon steel for diesel injection pumps. The unique properties of this EZM speciality offer the perfect answer to such contradictory demands as maximum pressure resistance, on the one hand, and optimum machining properties, on the other. EZM is also a specialist for the processing of antifriction bearing steel/ball bearing steel, as well as alloyed high-grade structural steel. Nozzle body Nozzle body Injector body Injection nozzle DVTD_2V_Section >> Current...

Deep groove ball bearing W 6003-2RS1 stainless steel with contact seal Key Features: Made from stainless steel for superior corrosion and chemical resistance. Seals on both sides maintain lubricant and prevent contaminants from entering, ideal for challenging environments. Low friction, optimized for low noise and vibration, allows rotational speeds of up to 13,000 r/min. Supports radial and axial loads in both directions. Dimensions: Hole Diameter: 17 mm. External Diameter: 35 mm. Width: 10 mm. Performance: Basic dynamic load of 4.94 kN and basic static load of 3.15 kN. No need for relubrication. Cage: Laminated metal, providing durability and support in high-speed operations. Properties and Sealing: Single row design with CN radial internal clearance and Normal tolerance class. Contact seal on both sides with grease lubrication.

Produced in Italy by NLMK Verona, which is become an undisputed producer of high quality forged blocks and bars, the ingots are available in a wide range of grades: •Case hardening steel •Heat treatable steel •Creep resistance steel •Martensitic stainless steel •Ball and roller bearing steel •Tool steel •Micro alloy steel •Nitriding steel •Tough at subzero steel •Pressure Vessel steel Applications : Oil & gas, wind power generation, shipbuilding, heavy engineering, nuclear power, automotive, etc. Category Case hardening steel Heat treatable steel Creap resistance steel Martensitic stainless steel Ball and roller bearing steel Tool steel Micro alloy steel Nitriding steel Tought at subzero steel Pressure vessel steel

SKF High Viscosity, High Load and High Temperature Grease SKF LGHB 2 is a high viscosity mineral oil based grease using the very latest calcium sulfonate complex thickener technology. Due to its specific composition, the product can withstand high temperatures and extreme stress and can therefore be used for a whole range of applications, especially in mining and in the metal and cement segments. This grease contains no additives and the (EP) high pressure properties are due to the soap structure. • Excellent anti-oxidation and anti-corrosion properties • Good EP performance in high load applications • Withstands peak temperatures up to 200°C Typical Applications: • Steel-on-steel ball joint bearings • Pulp and paper machines • Asphalt vibrating screens • Continuous casting machines • Sealed spherical roller bearings with an operating temperature up to 150 °C • Roller bearings in the steel industry • Forklift mast rollers

Attach this roller glider, which is made of highly-durable aluminium material, permanently to a traversable, overhead lifeline system (8 or 6 mm). Thanks to its special ball bearing-mounted stainless steel rollers, this glider runs really smoothly along the cable and can also be used to go around curves (up to 180°). General national technical approval (German: "abZ"): Z-14.9-786 EN 795:2012, C Ideal for overhead usage Made of highly-durable aluminium material Extremely smooth-running stainless steel rollers Specially designed for lifeline systems (8 and 6 mm)

— Whitworth pipe thread — Chambered O-ring — Sealing NBR, FKM — Material brass nickel-plated — Temperature range 32 to 122 °F (0 to +50 °C) — Working pressure range -13 to 218 psi (-0,9 to 15 bar) — Speed 800 rpm — Hybrid stainless steel ball bearing with ceramic balls

— Whitworth pipe thread — Chambered O-ring — Sealing NBR, FKM — Material brass nickel-plated — Temperature range 32 to 122 °F (0 to +50 °C) — Working pressure range -13 to 218 psi (-0,9 to 15 bar) — Speed 800 rpm — Hybrid stainless steel ball bearing with ceramic balls

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft and ball bearings in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - optional potting against water jets (IP 69K) - electrical connections via round plug or lead exit.

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft and ball bearings in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - optional potting against water jets (IP 69K) - electrical connections via round plug or lead exit.

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft and ball bearings in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - optional potting against water jets (IP 69K) - electrical connections via round plug or lead exit.

The angle transducers have a magnetic scanning according to the HALL principle. Due to the robust design, critical and interference-free applications in harsh environments can be realized. They have a robust housing (wall thickness > 5 mm) made of aluminium or stainless steel, shaft and ball bearing made of stainless steel, shaft with flattening, rotor with shaft and permanent magnet mounted in prechamber, sensor circuit consisting of ASIC with Hall elements and interface electronics housed in closed main chamber. Two models are available: For low and high temperature applications. The model for low-temperature use is equipped with a special grease for bearings and shaft seal. Seals and shaft seal are made of PTFE. Cable gland with clamping jaw pressure screw and silicone seal. The model for high temperature use is without shaft seal. Under the rear cover there is a signal changeover switch (CW/CCW). On the side there is a preset button (4 mA) placed under a screw plug.