Results for
IGUS® GMBH
Germany
drylin® SHT-12 linear module, drylin® R hard-anodised aluminium shafts, Trapezoidal lead screw TR10x2 made of stainless steel with ball bearings, machined lead screw ends 6h9x17mm, quad blocks, aluminium shaft end support, stroke lengths in 250mm or 500mm. Configure drylin SHT linear modules individually here: https://igus.eu/ddx
Request for a quoteIGUS® GMBH
Germany
xiros® B180 FDA for the food sector B180 is already the most successful range in the xiros® family, reliable and inexpensive. Now this range becomes a low-cost solution for the food industry. All dimensions up to Ø 25 mm are also available from now on in the FDA-approved version. For this, it is enough to adapt the cage of the polymer ball bearing, as the rings are already made from FDA-compliant material. Now xirodur® B180 ball bearings with stainless steel balls can be used anywhere in the unpackaged food processing/handling area and where temperatures do not exceed 80°C. Raceways and cages made of FDA approved plastics Lubricant- and maintenance-free Washable For temperatures up to 80℃ Application areas:Food and packaging technology, handling technology, medical technology, cleanroom sector. xiros® B180 FDA for the food sector B180 is already the most successful range in the xiros® family, reliable and inexpensive. Now this range becomes a low-cost solution for the food industry. All dimensions up to Ø 25 mm are also available from now on in the FDA-approved version. For this, it is enough to adapt the cage of the polymer ball bearing, as the rings are already made from FDA-compliant material. Now xirodur® B180 ball bearings with stainless steel balls can be used anywhere in the unpackaged food processing/handling area and where temperatures do not exceed 80°C. Raceways and cages made of FDA approved plastics Lubricant- and maintenance-free Washable For temperatures up to 80℃ Application areas:Food and packaging technology, handling technology, medical technology, cleanroom sector.
Request for a quoteNORELEM FRANCE
France
Outer jacket stainless steel. Cage stainless steel. Balls stainless steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seals and a stainless steel cage. The bearing is secured with DIN 471/472 circlips. Linear ball bearings with doublesided seals should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts.
Request for a quoteNORELEM FRANCE
France
Shell, ballbearing steel. Cage, plastic. Balls, steel. Note With seals both ends. The linear ball bearing is secured using DIN 471 / 472 circlips. Application Suitable for applications where installation space is limited.
Request for a quoteNORELEM FRANCE
France
Steel housing. Nitrile rubber seal. Preloaded highaccuracy bearings with a 60° thrust angle. The bearings accept both radial and axial forces from both directions. Due to their preload, the angular contact ball bearings provide a high level of stiffness, excellent concentricity, precise tool positioning and repeatability. The integrated lowfriction seal effectively keeps dirt away from the bearing, thereby ensuring excellent operating safety and a long service life. The bearing friction coefficient Mrl is a reference value. The moment of inertia corresponds to that of the rotating inner ring. The limiting speeds are applicable after grease is applied. Technical data All bearings are supplied ready for mounting with lubricating grease type KE2P35 acc. to DIN 51825. Housing and shaft tolerances correspond to roundness tolerance class IT2 and perpendicularity tolerance class IT4.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
Housing plastic. Ball bearing stainless steel 1.4112. Plain bearing insert POM. Bushes and grease nipple stainless steel 1.4301. Version Plain bearing insert white. Housing green. Stainless steel parts bright. Note The housings are very robust, hard wearing and shock proof. They are resistant to most alkaline solutions, weak acids (PH 49) and brines. In contrast to cast or steel housings the special plastic in these housings prevent the formation of microorganisms. Drawing reference 1) ball bearing 2) plain bearing
Request for a quoteNORELEM FRANCE
France
Body carbon steel. Balls roller bearing steel. Diverters plastic. Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With doublesided end seal. 4row versions with round arch profile. The profile guide rail tracks are arranged at 45° and can accept loads from all directions. High dynamic values v = 5 m/s. Applicable temperature in continuous use max. 80 °C. On request Various precision and preload classes. Drawing reference 1) ground ref. edge
Request for a quoteNORELEM FRANCE
France
Body carbon steel. Ball, ball bearing steel 1.2067. Form D: Ball with POM insert. Form H: Ball with POM insert. Form K: Ball with carbide insert. Form M has a carbide ball. Version: Body tempered and phosphated. Ball hardened. Form M ball nickel plated. Note: Self-aligning pads serve as stops, supports and thrust pads in fixture constructions. Ball secured against rotation. * Valid only if the minimum bore depth is observed. Drawing reference: Form C: with male thread, flattened ball, smooth. Form D: with male thread, flattened ball, with POM insert. Form F: with male thread, flattened ball, diamond grip. Form M: with male thread, flattened ball, with carbide insert. Form G: press fit, flattened ball, smooth. Form H: press fit, flattened ball, with POM insert. Form J: press fit, flattened ball, diamond grip. Form K: press fit, flattened ball, with carbide insert.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Deep groove ball bearing W 6003-2RS1 stainless steel with contact seal Key Features: Made from stainless steel for superior corrosion and chemical resistance. Seals on both sides maintain lubricant and prevent contaminants from entering, ideal for challenging environments. Low friction, optimized for low noise and vibration, allows rotational speeds of up to 13,000 r/min. Supports radial and axial loads in both directions. Dimensions: Hole Diameter: 17 mm. External Diameter: 35 mm. Width: 10 mm. Performance: Basic dynamic load of 4.94 kN and basic static load of 3.15 kN. No need for relubrication. Cage: Laminated metal, providing durability and support in high-speed operations. Properties and Sealing: Single row design with CN radial internal clearance and Normal tolerance class. Contact seal on both sides with grease lubrication.
Request for a quoteNORELEM FRANCE
France
Housing washer, shaft washer and rolling elements, bearing steel. Cage, steel. Note Axial ball bearings accept high axial loads from one direction but may not be loaded radially. The bearings are separable. This means the bearing parts can be fitted independently of each other. The main dimensions of the axial ball bearing conform to ISO 104 and DIN 711. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. These tolerance classes are standard and are well suited for most applications.
Request for a quoteNORELEM FRANCE
France
Ceramic bearings Si3N4. Bearing cage PTFE. For most applications Si3N4 is the preferred material for ceramic bearings. Silicon nitride bearings are light, very hard and highly wear resistant. High and ultrahigh performance bearings are used in e.g. aerospace technology, metal production industries (high application temperatures), machine manufacturing, chemical industries (chemically aggresive substances), pharmaceutical and medical industries, semiconductor and biotechnology (clean room enviroments which may not be contaminated by lubricants). On request Special version with PEEK ball cage. Without ball cage.
Request for a quoteNORELEM FRANCE
France
Inner ring, outer ring and rolling elements, bearing steel. Cage sheet steel. Labyrinth seal sheet steel. Lip seal NBR. Version 2Z = sealed both sides with noncontact labyrinth seals. 2RSR = sealed both sides with contact lip seals. Note Deep groove ball bearings accept high radial and axial loads. Axial loads are absorbed in both directions. The versions 2Z and 2RSR are lubricated for life with a high quality grease. The main dimensions of the deep groove ball bearings conform to DIN 6251. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. The radial internal clearance corresponds to the clearance CN acc. to DIN 6204. These tolerance classes are standard and well suited for most applications.
Request for a quoteNORELEM FRANCE
France
Housing steel. Cage plastic. Balls steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seal. The linear ball bearings have a plastic cage which results in quiet and outstanding running properties. With flange for direct mounting on the housing. Linear ball bearings with doublesided seal should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts. Precision guide shafts 21595. Fastening screws 07160.
Request for a quoteResults for
Ball bearing steels - Import exportNumber of results
14 ProductsCountries
Company type