Automatic testing - Import export

Our revolutionary Halo system is an automatic metal detector testing device. It is designed to automatically test ferrous, non-ferrous and stainless steel samples on all Fortress metal detectors. Automatic testing saves time, money, labour, along with removing the risk of human error and work place injury at critical control points on a manufacturing line while complying with industry standards. The Halo system is ideal for applications where manual testing of a metal detector is made difficult due to access, position, access to the product flow, environmental conditions, etc.

Overpressure and vacuum possible - Different pressure and flow ranges possible - Several measuring ranges possible in one device - Modern operation via 5" touch graphic colour display - Completely remote controllable, optionally via ProfiNet

The All-in-One module 2511 is predestined for use in automated manufacturing testing of high-performance battery modules and battery packs, regardless of whether they are round, prismatic or pouch cells. In single or multichannel mode, important battery parameters such as AC and DC internal resistance or cell voltage can be recorded and evaluated extremely fast and precisely using fieldbus-capable technology in order to make quality-relevant statements regarding ageing .............. FEATURES AC and DC internal resistance measurement 10 … 300 mΩ Four-wire measurement method for highest precision Measuring and evaluation results in a few milliseconds Frequency ranges: 1kHz, 100 Hz, 10 Hz, 1 Hz Voltage measurement: 0 ... ±5 VDC/±60 VDC Temperature measurement: 0 °C … +100 °C Resolution: up to 0.01 μΩ Single to multi-channel applications, temperature measurement Extremely compact design, state-of-the-art interfaces PC software for intuitive parametrisation and configuration

Automatic inspection and test unit: Automatic choice of measuring ranges from 200 μΩ to 20 kΩ Resolution up to 1 nΩ Standard interfaces IEEE488, RS232, RS485, (USB and Ethernet option) Checking of tolerances, classifi cation with statistics Highest measuring accuracy: Measuring error ≤ 0.01 % Future-orientated measuring method with thermal e.m.f. compensation. High level of stability due to constant comparisons with internal reference values. Inductive probes: Current regulation results in voltage-free disconnection, calculation of cooling curves of coils. Menu control: Setting for measuring current entry for absolute or relative limits, classifi cation with statistics, bar display for calibration of measuring probes, determination of resistivity, and many other functions. The operation of the measuring section of the RESISTOMAT® model 2304, 2305 high-precision inspection and test unit is based on an upgraded 4-wire design.

Pressing bearings Manually assemble anti-knock on hand lever press Automatically assemble and test retaining ring

EOL test stand for e-charging columns and their power electronics for the simulation of different electrical loads and mains fluctuations. The test stand has automatic contacting and achieves high test throughputs in end-of-line operation. Different variants of the power electronics of electric charging columns can be tested. On the software side, Merecs Engineering relies on NI-LabVIEW and NI-TestStand.

The RESISTOMAT® model 2329 is particularly suitable for fast measurements of low resistances in automated processes. Up to 50 measurements per second can easily be performed. The device complies with the latest CE guidelines and is designed for laboratory use as well as heavy-duty industrial applications. A 2-fold and 4-fold comparator with switching outputs has been included for classifi cation and selection; this feature is particularly useful for serial tests. One special application involves the measurement of contact resistances (dry-circuit measurement); the load voltage in this case is limited to 20 mV in order to prevent fritting (DIN IEC 512). The RS232 (standard) and IEEE488, USB and Ethernet (option) computer interfaces allow the set-up of fully automatic testing stations. The PLC interface allows easy integration into your production process control.

We develop fully automatic test systems for inclination sensors and inertial sensors (MEMS, tilt sensors) according to customer requirements. With these systems, combined temperature and motion simulation is possible. We set quality standards with rate tables from Acutronic, for example. With the help of multi-axis rate tables, we can precisely position DUTs in end-of-line (EoL) test operations or for development purposes and calibrate and test them under temperatures of e.g. -40°C and up to 120°C. Merecs Engineering can also connect the test system to our customer's IT infrastructure, set up databases and automatic data analysis using Mircosoft PowerBI, so that important key figures such as First Pass Yield (FPY), process capability, system availability, statistics and trends are continuously updated and displayed on online dashboards. For example, more than 100 DUTs are possible per test run.

The system is a self-sufficient unit and is made of a solid welded frame, contains media preparation, a hydraulic unit, and electrical engineering. The pressure test bench has a secure test chamber for burst pressure and hydrostatic pressure tests and, optionally, a climatic chamber for pressure tests with environmental simulation. Depending on the option selected, pressure change tests up to 2,000 bar and 10 Hz can be generated. With the test circuit for hydrostatic and burst pressure tests, pressure ramps up to 3,000 bar can be generated. It is operated on a support arm PC. For pressure tests according to EG79 / EU406 – Section 4.2 Pressure booster for additional supply Displacement volume max. 15cm³ Frequency up to 10Hz Pressure Load Changes as sine & trapezoidal curve (depending on the expansion volume) Impulse intensifier for small volumes up to 2,000bar Safety test chamber with automatic door Media treatment with dirt and clean tank

Integrated Photonics is all about our equipment for high-precision positioning of Photonic Integrated Circuits (PICs), enabling you to optimize your back-end processes and reduce your costs. Our fiber array unit combines the latest technologies on automatic fiber placement. Our Photonic Test Prober (PTP) and Photonic Visual Inspection Tool (PVIT) are part of the MEKOPP project.

HT-TX; The series has fully digital control and uses two high-speed DSPs, ensuring high input power factor and low input current distortion. Its high performance combined with the internal three-phase isolation transformer brings it to the highest quality and protection standards. The architecture, which includes over-temperature and other protection measures with the 8 different sensors it uses, ensures a long service life with safety methods such as Overload, Low Battery Voltage, Fan Errors, Short Circuit protections. Four built-in circuit breakers provide complete control with high quality switches. In order to ensure battery safety and highest performance, it uses all of the latest known technologies: Smart charging method, Automatic adjustable performance test and Thermal charging capabilities. It provides the user with easy access to data and operation thanks to its very simple and understandable designed multi-language LCD interface.

Portable automatic X-ray Film Processor with daylight option for X-ray film processing of the highest level. Most important features Integrated Dryer: Perfectly developed films after careful drying Fully Automatic: Processor controlled developing and intuitive operation Precise Mechanisms: With precise manufactured roller packages any film development is successful at first attempt Optimal Results due to proven precision technology Professional film development is a complex process that is dependent on precise adherence to specific parameters. Because of the exact process control of the XR 24 NDT, optimal film processing results are assured. The special submersion-tank mechanics reliably prevents crystallization of the chemistry during the stand-by phase. * Spectacular results * Finest Details * Proper Developing

High speed IGBT and Thyristor Technology Voltage adjustment range: 1% - 150% Test currents: 20A – 1000A Test duration: 0.01sec – 999sec (Adjustable) Independent voltage adjustment on each phase Star connected Network simulation Delta connected Network simulation IEC 61000-4-34 Standard tests Automatic test restart Production at all industrial input voltages 7" touchscreen Operator Panel IP20 Standard Cabinet TS EN ISO 9001: 2015 Quality Certified

• According to IEC/EN 62 020 • for AC and pulsating DC currants Type A to IEC/TR 60755 • 9 tripping values from 10 mA to 10 A or from 10 mA ... 30 A • Frequency range 20 ... 2000 Hz • Selection of manual or automatic reset • With prewarning • With test and reset button • Broken wire detection • Short reaction time • With adjustable delay tv • De-energized on trip • LED indication for auxiliary supply and state of contact • 2 x 1 changeover contact • With sealable cover • Devices available in 3 enclosure versions: IR 5882: 63 mm deep with terminals near to the bottom to be mounted in consumer units or industrial distribution systems according to DIN 43 88 - width 105 mm - with internal residual current transformer

• According to IEC/EN 62 020 • for AC and pulsating DC currants Type A to IEC/TR 60755 • 9 tripping values from 10 mA to 10 A or from 10 mA ... 30 A • Frequency range 20 ... 2000 Hz • Selection of manual or automatic reset • With prewarning • With test and reset button • Broken wire detection • Short reaction time • With adjustable delay tv • De-energized on trip • LED indication for auxiliary supply and state of contact • 2 x 1 changeover contact • With sealable cover • Devices available in 3 enclosure versions: IL 5882: 63 mm deep with terminals near to the bottom to be mounted in consumer units or industrial distribution systems according to DIN 43 880 - width 35 mm - for connection of external residual current transformer, e. g. DOLD ND 5016, ND5019

Before starting the test, choose test method, and estimate an initial mass and Δm. Start the test. If the first specimen fails, decrease the mass of the falling dart by Δm. If the first specimen is not a failure, increase the mass of the falling dart by Δm. Continue the test according to this rule. In brief, increase or decrease by Δm according to whether the former specimen is a failure or not. After 20 specimens, calculate the total number of failed specimens N. If N equals to 10, the test is over. If N is less than 10, add specimens and continue to test until N equals to 10. If N is greater than 10, add specimen and continue the test until the number of non-failure specimens reaches 10. Then the tester calculates the test results automatically according to specific formulas. According to ISO 7765, ASTM D1709, touch displat, thermal printer report out, USB data out to excel, pneumatic sample grip

Spray washing: automatic cleaning For companies, manual cleaning of parts is a time-consuming activity. The Laborex spray washing machines ensure the automatic cleaning, rinsing, degreasing and drying of industrial parts made of metal or plastic. This way you can carry out other work without any worries while your parts are automatically cleaned. Test our rotating spray washing machines yourself We would like to invite you to come and test our rotating spray washing machines in our showroom. This is completely free and without obligation. Make your appointment now. Ideal solution for external cleaning of parts The Laborex rotating spray washing machines are the ideal solution for the external cleaning of parts. The spray washing principle is simple: you place the parts to be cleaned in the basket and select a washing program.

The P 250 Test Bench with Control C.2 IPC is a new modular test bench that can be adapted to your needs. It offers the possibility to test with Steck-o, Hand or Hydraulic quick cone system. You can also install a Euro Pallet inside. The Chamber also accepts a non-end extension if you prefer to test a hose lengthwise. The controller offers all parameters for a fully automatic test, with visualization of the pressure and may other features but also connectivity to your server or other machine in line with industry 4.0. Quality and safety •Fully enclosed test chamber •Also suitable for static pressure testing of various hydraulic components such as valves, hydraulic cylinders, housings, quickrelease couplings, etc. •Safety switch - when the hood is opened, all pressure is automatically released within 1/10 second •Environmentally friendly test medium (water-oil emulsion) •Easy and safe to operate •Quick changeover between automated and manual setup mode

Safe, reliable and easy measurements of the exit speed made at the muzzle of firearms. Special design to be integrated into safe test rigs for material testing. Examples of application: Simulation of hailstorm on solar cells, simulation of stone-chipping on coated surfaces or on windscreens, examinations concerning the effect of projectiles on bulletproof vests, bulletproof doors and other security equipment. All models can be equipped with various possibilities to draw up test reports automatically.

Modular equipments for technical training at engines under realistic operating conditions: under load at the engine dynamometer. Applications depending on scope of delivery: torque, power = f(speed), specific consumption sfc = f(speed, power) (gravimetric, selectable automatically). Above tests can be carried out in different ways: conventionally or supported by the test bed's MP Computer or with automatic documentation by directly printing or by PC thermal balance (PC required), real function of a transmission (automatic transmission only with PC), p-V-diagram (PC required). Functions of engine and engine control depending on the load may be demonstrated by using motor analysers, exhaust gas analysers and further measuring instruments. Model-specific error-switch boards are extending the demonstration varieties and are enabling a practical error diagnostics. Comparison of different engines under a certain aspect within one lesson.

The PowerTest is a sophisticated testing and encoding system for chip modules on 35 mm tapes. Maximum flexibility allows versatile use: It can be used by card manufacturers for the incoming inspection or encoding of chip module tapes, and with integrated disconnect station by module tape manufacturers as a quality measurement system for the inspection of outgoing goods. Testing of contact, contactless and Dual Interface IC modules can be executed with the highest performance and yield by processing of up to 128 modules in parallel. In addition to basic test and parameter test, software is also available for chip module initialisation, personalisation, and OS loading. Integration of SAM, HSM, or similar modules can be realised easily. Using high-end reader technology from Smartware or Micropross, this automatic IC module test handler offers unmatched performance for the complete production test of smart card and RFID modules. Flexible reel to reel system for high-speed test,...

Haoxin Technologyestablished in 2011, is a national high-tech enterprise of LCD display manufacturer and LCD panel supplier, specializing in design and manufacture TFT LCDs, Touch Displays, HDMI displays and other LCD display products. Haoxin Technology has industry-leading automatic production and testing equipment which can provide customers with standard and customized display and touch total solutions. Our products are widely used in Industrial Control Equipment, Medical, Smart-Home, Automotive and Vehicle Displays, Instrumentation, and other Information Terminal applications.

The ZWR+ is 5 times more productive than any standard measurement of SF6 gas purity in gas insulated switchgear and high voltage equipment. Delivering laboratory-standard accuracy, stability and repeatability in the field: the ZWR+ provides automatic, multi-analysis gas quality testing using advanced IR measurement technology for the fastest and simplest, zero-emission measurement solution in GIS preventative maintenance.

Filling plants and bottling from a single source Use our services and lay back. At Filltech, we can ensure gas filling services at custom-made aplications maintained and controlled at our premises. Gases for food and industrial applications, noble and special gases and different gas mixtures are filled accurately in different cylinders or containers. CO 2 cylinders for soda If you would like to know what tailor-made systems can achieve andhow many benefits they provide, we like to share our customer cases with you. In the food industry, for example, we cooperated with a soda supplier. We developed and manufactured a fully automatic filling plant. Up to 1,000 cylinders per hour can be drained, flushed and refilled automatically. An integrated leak test, a 100-percent weight loss and the acquisition of all the highest quality padding ensure a high quality process. Special software for monitoring and documenting the production parameters, developed by Filltech, ensures all statutory proc

Our modular control packages are customized to significantly improve your vacuum heat treat operations, meet industry standards requirements and ultimately provide you with precise and reliable process control. We offer compact, fully automatic modules for new installations or retrofits. Each solution consists of a cost-effective module or combination of modules delivered with state-of-the-art equipment and backed by our extensive technological expertise. Vacuum Control Solution is supplied with a PROTHERM programmable controller and optional multiple load thermocouple inputs for soak guarantees. Interfaces to popular vacuum gauges. FEATURES • Full compliance with AMS 2750, CQI-9, NFPA 86-C, NADCAP* • Expanded recipe control including automatic leak test cycles • Guaranteed soaks based on multiple work thermocouples • Recipe control of partial pressure setpoints, guaranteed soak, ramp rates, events and quench gas selection • Built-in uniformity survey capability • Temperature...