Automatic testing - Import export

Overpressure and vacuum possible - Different pressure and flow ranges possible - Several measuring ranges possible in one device - Modern operation via 5" touch graphic colour display - Completely remote controllable, optionally via ProfiNet

The All-in-One module 2511 is predestined for use in automated manufacturing testing of high-performance battery modules and battery packs, regardless of whether they are round, prismatic or pouch cells. In single or multichannel mode, important battery parameters such as AC and DC internal resistance or cell voltage can be recorded and evaluated extremely fast and precisely using fieldbus-capable technology in order to make quality-relevant statements regarding ageing .............. FEATURES AC and DC internal resistance measurement 10 … 300 mΩ Four-wire measurement method for highest precision Measuring and evaluation results in a few milliseconds Frequency ranges: 1kHz, 100 Hz, 10 Hz, 1 Hz Voltage measurement: 0 ... ±5 VDC/±60 VDC Temperature measurement: 0 °C … +100 °C Resolution: up to 0.01 μΩ Single to multi-channel applications, temperature measurement Extremely compact design, state-of-the-art interfaces PC software for intuitive parametrisation and configuration

Automatic inspection and test unit: Automatic choice of measuring ranges from 200 μΩ to 20 kΩ Resolution up to 1 nΩ Standard interfaces IEEE488, RS232, RS485, (USB and Ethernet option) Checking of tolerances, classifi cation with statistics Highest measuring accuracy: Measuring error ≤ 0.01 % Future-orientated measuring method with thermal e.m.f. compensation. High level of stability due to constant comparisons with internal reference values. Inductive probes: Current regulation results in voltage-free disconnection, calculation of cooling curves of coils. Menu control: Setting for measuring current entry for absolute or relative limits, classifi cation with statistics, bar display for calibration of measuring probes, determination of resistivity, and many other functions. The operation of the measuring section of the RESISTOMAT® model 2304, 2305 high-precision inspection and test unit is based on an upgraded 4-wire design.

Pressing bearings Manually assemble anti-knock on hand lever press Automatically assemble and test retaining ring

EOL test stand for e-charging columns and their power electronics for the simulation of different electrical loads and mains fluctuations. The test stand has automatic contacting and achieves high test throughputs in end-of-line operation. Different variants of the power electronics of electric charging columns can be tested. On the software side, Merecs Engineering relies on NI-LabVIEW and NI-TestStand.

The RESISTOMAT® model 2329 is particularly suitable for fast measurements of low resistances in automated processes. Up to 50 measurements per second can easily be performed. The device complies with the latest CE guidelines and is designed for laboratory use as well as heavy-duty industrial applications. A 2-fold and 4-fold comparator with switching outputs has been included for classifi cation and selection; this feature is particularly useful for serial tests. One special application involves the measurement of contact resistances (dry-circuit measurement); the load voltage in this case is limited to 20 mV in order to prevent fritting (DIN IEC 512). The RS232 (standard) and IEEE488, USB and Ethernet (option) computer interfaces allow the set-up of fully automatic testing stations. The PLC interface allows easy integration into your production process control.

We develop fully automatic test systems for inclination sensors and inertial sensors (MEMS, tilt sensors) according to customer requirements. With these systems, combined temperature and motion simulation is possible. We set quality standards with rate tables from Acutronic, for example. With the help of multi-axis rate tables, we can precisely position DUTs in end-of-line (EoL) test operations or for development purposes and calibrate and test them under temperatures of e.g. -40°C and up to 120°C. Merecs Engineering can also connect the test system to our customer's IT infrastructure, set up databases and automatic data analysis using Mircosoft PowerBI, so that important key figures such as First Pass Yield (FPY), process capability, system availability, statistics and trends are continuously updated and displayed on online dashboards. For example, more than 100 DUTs are possible per test run.

The system is a self-sufficient unit and is made of a solid welded frame, contains media preparation, a hydraulic unit, and electrical engineering. The pressure test bench has a secure test chamber for burst pressure and hydrostatic pressure tests and, optionally, a climatic chamber for pressure tests with environmental simulation. Depending on the option selected, pressure change tests up to 2,000 bar and 10 Hz can be generated. With the test circuit for hydrostatic and burst pressure tests, pressure ramps up to 3,000 bar can be generated. It is operated on a support arm PC. For pressure tests according to EG79 / EU406 – Section 4.2 Pressure booster for additional supply Displacement volume max. 15cm³ Frequency up to 10Hz Pressure Load Changes as sine & trapezoidal curve (depending on the expansion volume) Impulse intensifier for small volumes up to 2,000bar Safety test chamber with automatic door Media treatment with dirt and clean tank

• According to IEC/EN 62 020 • for AC and pulsating DC currants Type A to IEC/TR 60755 • 9 tripping values from 10 mA to 10 A or from 10 mA ... 30 A • Frequency range 20 ... 2000 Hz • Selection of manual or automatic reset • With prewarning • With test and reset button • Broken wire detection • Short reaction time • With adjustable delay tv • De-energized on trip • LED indication for auxiliary supply and state of contact • 2 x 1 changeover contact • With sealable cover • Devices available in 3 enclosure versions: IR 5882: 63 mm deep with terminals near to the bottom to be mounted in consumer units or industrial distribution systems according to DIN 43 88 - width 105 mm - with internal residual current transformer

• According to IEC/EN 62 020 • for AC and pulsating DC currants Type A to IEC/TR 60755 • 9 tripping values from 10 mA to 10 A or from 10 mA ... 30 A • Frequency range 20 ... 2000 Hz • Selection of manual or automatic reset • With prewarning • With test and reset button • Broken wire detection • Short reaction time • With adjustable delay tv • De-energized on trip • LED indication for auxiliary supply and state of contact • 2 x 1 changeover contact • With sealable cover • Devices available in 3 enclosure versions: SL 5882: 100 mm deep with terminals near to the top to be mounted in cabinets with mounting plate and cable ducts - width 35 mm - for connection of external residual current transformer, e. g. DOLD ND 5016, ND5019

• According to IEC/EN 62 020 • for AC and pulsating DC currants Type A to IEC/TR 60755 • 9 tripping values from 10 mA to 10 A or from 10 mA ... 30 A • Frequency range 20 ... 2000 Hz • Selection of manual or automatic reset • With prewarning • With test and reset button • Broken wire detection • Short reaction time • With adjustable delay tv • De-energized on trip • LED indication for auxiliary supply and state of contact • 2 x 1 changeover contact • With sealable cover • Devices available in 3 enclosure versions: IL 5882: 63 mm deep with terminals near to the bottom to be mounted in consumer units or industrial distribution systems according to DIN 43 880 - width 35 mm - for connection of external residual current transformer, e. g. DOLD ND 5016, ND5019

Portable automatic X-ray Film Processor with daylight option for X-ray film processing of the highest level. Most important features Integrated Dryer: Perfectly developed films after careful drying Fully Automatic: Processor controlled developing and intuitive operation Precise Mechanisms: With precise manufactured roller packages any film development is successful at first attempt Optimal Results due to proven precision technology Professional film development is a complex process that is dependent on precise adherence to specific parameters. Because of the exact process control of the XR 24 NDT, optimal film processing results are assured. The special submersion-tank mechanics reliably prevents crystallization of the chemistry during the stand-by phase. * Spectacular results * Finest Details * Proper Developing

The P 250 Test Bench with Control C.2 IPC is a new modular test bench that can be adapted to your needs. It offers the possibility to test with Steck-o, Hand or Hydraulic quick cone system. You can also install a Euro Pallet inside. The Chamber also accepts a non-end extension if you prefer to test a hose lengthwise. The controller offers all parameters for a fully automatic test, with visualization of the pressure and may other features but also connectivity to your server or other machine in line with industry 4.0. Quality and safety •Fully enclosed test chamber •Also suitable for static pressure testing of various hydraulic components such as valves, hydraulic cylinders, housings, quickrelease couplings, etc. •Safety switch - when the hood is opened, all pressure is automatically released within 1/10 second •Environmentally friendly test medium (water-oil emulsion) •Easy and safe to operate •Quick changeover between automated and manual setup mode

Safe, reliable and easy measurements of the exit speed made at the muzzle of firearms. Special design to be integrated into safe test rigs for material testing. Examples of application: Simulation of hailstorm on solar cells, simulation of stone-chipping on coated surfaces or on windscreens, examinations concerning the effect of projectiles on bulletproof vests, bulletproof doors and other security equipment. All models can be equipped with various possibilities to draw up test reports automatically.

The PowerTest is a sophisticated testing and encoding system for chip modules on 35 mm tapes. Maximum flexibility allows versatile use: It can be used by card manufacturers for the incoming inspection or encoding of chip module tapes, and with integrated disconnect station by module tape manufacturers as a quality measurement system for the inspection of outgoing goods. Testing of contact, contactless and Dual Interface IC modules can be executed with the highest performance and yield by processing of up to 128 modules in parallel. In addition to basic test and parameter test, software is also available for chip module initialisation, personalisation, and OS loading. Integration of SAM, HSM, or similar modules can be realised easily. Using high-end reader technology from Smartware or Micropross, this automatic IC module test handler offers unmatched performance for the complete production test of smart card and RFID modules. Flexible reel to reel system for high-speed test,...

Filling plants and bottling from a single source Use our services and lay back. At Filltech, we can ensure gas filling services at custom-made aplications maintained and controlled at our premises. Gases for food and industrial applications, noble and special gases and different gas mixtures are filled accurately in different cylinders or containers. CO 2 cylinders for soda If you would like to know what tailor-made systems can achieve andhow many benefits they provide, we like to share our customer cases with you. In the food industry, for example, we cooperated with a soda supplier. We developed and manufactured a fully automatic filling plant. Up to 1,000 cylinders per hour can be drained, flushed and refilled automatically. An integrated leak test, a 100-percent weight loss and the acquisition of all the highest quality padding ensure a high quality process. Special software for monitoring and documenting the production parameters, developed by Filltech, ensures all statutory proc

Our modular control packages are customized to significantly improve your vacuum heat treat operations, meet industry standards requirements and ultimately provide you with precise and reliable process control. We offer compact, fully automatic modules for new installations or retrofits. Each solution consists of a cost-effective module or combination of modules delivered with state-of-the-art equipment and backed by our extensive technological expertise. Vacuum Control Solution is supplied with a PROTHERM programmable controller and optional multiple load thermocouple inputs for soak guarantees. Interfaces to popular vacuum gauges. FEATURES • Full compliance with AMS 2750, CQI-9, NFPA 86-C, NADCAP* • Expanded recipe control including automatic leak test cycles • Guaranteed soaks based on multiple work thermocouples • Recipe control of partial pressure setpoints, guaranteed soak, ramp rates, events and quench gas selection • Built-in uniformity survey capability • Temperature...

The ZwickRoell 3105 Combi Test machine is a hardness tester that is controlled by a microcomputer. This unit is characterized by a highly accurate measurements in several IRHD and shore measurement ranges. This device eradicates the operator related errors due to having a fully automatic and digital measurement system across all Shore and IRHD ranges. This unit is also compatible with services that are concerned with sheet materials like performing an automatic test sequence. It has an indenter that scans the surface of the item before the spring generated load is applied.

ZwickRoell`s HDT/ Vicat all round instruments have been designed in a manner that enables them to be convenient for testing in research and development, inwards checks of goods, monitoring of production and also in education and training. Versions with up to 6 testing stations can be made available. The instruments include measuring stations which can be lowered in an automatic manner and then there is the optional test-weight lowering. The optional re-cooling device is able to reduce the oil re-cooling time as a result of which high test-rates are a possibility. The advantages included here are that the tests possible to the standards of ISO 306, ASTM D 1525, ISO 75 and ASTM D 648. Key Advantages and Features: - Measuring station lowered automatically - Optionally available automatic test-weight lowering - Optional internal re-cooling device for rapid attainment of starting temperature - Testing to ISO 306, ASTM D1525, ISO 75 and ASTM D648.

Fully Automatic Integrity Tester 3 can be used to check the integrity of membrane filter cartridges used in the food and beverage industry Integrated languages: DE, EN, FR, ES, PT, IT Independent setting of the test pressure Automatic execution of the pressure hold test Self-venting after the test Built-in thermal strip printer Data backup / management on PC Memory full display Stainless steel pressure connections Pressure measuring range 0-4,000 mbar 1 to 19 freely programmable test programs 200 test protocols saved, first in / first out Data backup / management on PC Memory full display

Semi-Automatic Integrity Tester Integrity Tester 1 can be used to check the integrity of membrane filter cartridges used in the food and beverage industry Integrated languages: DE, EN, FR, ES, PT, IT Semi-automatic pressure hold test Pressure measuring range 0-4,000 mbar 1 to 19 freely programmable test programs 150 test protocols saved, first in / first out Data backup / management on PC Memory full display Stainless steel pressure connections Charging power supply: EU, US, UK, AU Option: print function of mobile printer

The basic version of the ZwickRoell Mflow extrusion plastometers can be used to establish the melt mass flow rate (MFR). The plastometer’s modular design is expandable using the piston transducer to permit determination of the melt volume flow rate (MVR) as well as for automatic adaptive parameter configuration. Common uses occur in goods inwards checks and quality assurance. Mflow extrusion plastometer includes the Zwick's automatic adaptive parameter configuration, which sets test parameters based on the material being tested to automatically minimize measuring errors. The basic version of the Mflow extrusion plastometer is designed to perform MFR tests in accordance with Method A and can be expanded for MVR tests as per Method B. Tests to the following standards are possible: Methods A and B as per ISO 1133, ASTM D1238, ASTM D3364, JIS K 7210.

The low load Vickers hardness tester ZHV30 conducts Knoop and Vickers hardness tests in accordance to the ISO6507, ISO4545 & ASTM E 384.The test load range is between HV0.2 and HV30. With an an automatic 5 position turret for an indenter it consists of maximum of 4 lenses facilitating the change and selection through the menu buttons. The magnifications of 25x to 500x helps in covering various applications. Integrated microscope and front panel display facilitates quick and easy hardness testing. The dwell times may be easily configured in electronics and test cycle is automatic. The load change is automatic and the test load is selected through the operating panel. Illumination intensity for each magnification lens can be stored individually. PC controlled versions,based on a High Definition software, which are semi automated or fully automated are also available for automated and sophisticated applications.

With the simple, robust and maintenance-free single gas monitor GasAlertClip Extreme of BW-Technologies a reliable monitoring and detection is secured (e.g. personal security) of all threats by single gases, whereby the measured value is displayed in real-time. The operating time is limited to 2 years and absolutely maintenance-free, batteries neither need to be charged nor to be exchanged. Thanks to simple operation time exposure reduces considerably, therefore this device is excellently suitable for industrial applications. Features of GasAlertClip Extreme: Large LCD-display indicates remaining operation lifetime in months, days, and hours Impact- and water-resistant Self-test of all functions of sensor, battery, electronic and acoustic/ optical alarm Compatible with the automatic testing station “BW-MicroDock II” Bright, wide-angles blinking alarm display With integrated vibration alarm for surroundings with higher noise level Daily self-test activated by user Recording and...