Air fans for industrial use - Import export

High flow wall fans for extraction and/or ventilation This type of fans provide significant air flows for the extraction and/or ventilation of industrial, livestock or agricultural premises. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - Structure and overpressure slats in galvanized steel to avoid premature corrosion. - Propellers made of AISI 430 BA stainless steel. - High quality bearings. - IP-55 three-phase electric motor - V-belts. - Transmission pulleys made of magnesium aluminum. - Engine support with tensioner. - Side inserts for easy transport.

DIRECT DRIVEN CENTRIFUGAL FANS EMPLOYMENT •Single inlet centrifugal fans. •Suitable for clean air and temperatures up to 60°C on machines and process-units. •10 models with air flow up to 4.000 m3/h and stastic pressure up to 180 mm H2O (1.800 Pa). •Steel housing painted impeller with forward curved blades wire mesh guard on inlet, outlet flange. • Enclosed and ventilated motor, three phase or single phase, IP55 protection, class F. BY REQUEST •Inlet spigot. •Model LCB AT. •Construction for air temperature up to 200° C.

*Made Of Galvanized Metal Plate *Wihtout Motor *Air System Easily With The Help Of Rectangular Fans *Designed For The Needs Of Middle Upper Aspiration Capacity *With The Help Of The Maintenance Covers, Engine And Fan Can Be Fixed Without Removing The Equipment.

Since the impellers are made of aluminium as areas of usage gas plants and acidic places preferred. Aspiration of smoke, iron foundry, cement plants, and paper mills Aspiration of moist and dusty air Industrial buildings, animal farms, greenhouses, garages, sport centers, and parks etc.

Ceiling fans for the recovery of stratified heat in the ceiling Ceiling fans with DT protection casing can be used to recover the stratified heat on the roof in winter, using the fan in winter allows us to save energy up to 30% Its use can be commercial and / or industrial and its installation can be on ceilings from 4m to 9m in height. The fans can be mounted individually or in groups with their corresponding speed regulator.

3m diameter ceiling fan with remote control and reversible MEGA AXIAL 3000 BRUSHLESS ceiling fans can be used to recover the stratified heat on the ceiling during winter and ventilate in summer, using the fan in winter allows us energy savings of up to 30%. Its use can be commercial and / or industrial and its installation can be in ceilings from 4m to 10m in height. The fans can be mounted individually with their remote control.

Hot air fan heaters with water coil (20 to 106 kW) - ATR The hot air heaters with hot water coil are ideal for heating all types of commercial, industrial or agricultural premises where a flow of hot air is required to heat different areas of the premises to be heated. The hot water must be produced by a diesel, gas or biomass boiler. The hot water, by means of a circulation pump, passes through the interior of the heating coil of the air heater and the heat transfer is carried out by the air fan of the air heater. The fan can be axial or centrifugal, the axial type is used for direct dissolution and the centrifugal fan allows a network of ducts to be applied in addition to having a greater reach.

Ceiling fans from 4 to 7m in diameter This type of fan provides significant energy savings and is characterized by having large diameter blades that generate an air flow of 96,810 to 529,000 m3/h. They are suitable for installation in any type of premises with ceilings from 4m to 12m high. Winter operation: Its function is to lower and homogenize the stratified hot air on the ceiling, thus reducing the heating needs of the room or premises. Summer operation Decrease in sensitive temperature around 4-6 ºC

Ceiling fans to cool in summer and save in winter DVW ceiling fans allow them to be used to ventilate in the summer and recover the stratified heat on the ceiling in winter, using the fan in winter allows us to save energy of up to 30%. Its use can be at a domestic, commercial and / or industrial level and its installation can be on ceilings from 2.3m to 10m high. The fans can be individually assembled with their corresponding speed regulator or up to 10 units can be grouped using our model RV10 electrical panel with regulator.

Industrial warm air heater with diesel or gas operation from 26 to 500 kW The MM hot air generators are indirect heating type equipment (the hot air does not mix with the combustion gases) and they work completely autonomously. They do not need additional elements for heat dissipation, a fact that reduces acquisition, installation and maintenance costs. Its operation is based on the heating of a certain air flow, through the combustion of diesel, natural gas or propane gas. Said flow is aspirated and driven by the fans that the equipment incorporates and that comply with the ERP 2020 regulations. The main advantages over other heating systems are: - Reduction of acquisition and installation costs - Very fast heating system - Air diffusion can be direct or a duct network can be applied - 90% combustion efficiency

AD BIG PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. AD BIG PREMIUM evaporative air conditioners, develop an air flow from 18,140 m3/h to 36,678 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 300m2 to 615m2. For larger surfaces more units can be installed.

Outdoor hot air generator for the heating of tents, covered swimming pools, etc. POOL MANN hot air generators are a perfect solution for the heating of closed premises where a heating system is required where the heat generating equipment must be located outside the room to be heated. Its operation can be diesel, methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - 90% combustion efficiency.

VIS MANN industrial air curtains are the perfect solution to prevent cold air in winter and hot air in summer. In addition, they provide an invisible barrier that prevents insects from entering the premises. VIS MANN A - Air only curtains VIS MANN E - Air curtains with electric resistances VIS MANN BAR - Air curtains with water coil

Collecting dust Fume/gas elimination Handling fine grained material (marble dust, granule, plastique etc.) At printing houses, different factories such as textile,

HRAD in-line duct fans

CONNECT TC100S Mix Flow Inline Blower CONNECT series is a mixed flow inline exhaust fan in various sizes. Specially designed for installing ventilation systems with high pressure, strong airflow and low noise levels. Energy Saving motor with ball bearing for log time operation. Removable body for easy cleaning, without the need to move the ducts. Mix Flow Inline Blower CONNECT are powerful enough to ventilate multiple areas with a single unit for one or more rooms of varying sizes Quality motor: Ball bearing motor Auto cut-off fuse built in motor Silicon steel lamination Pure copper winding ProtectionIPX4 Input/ Output Ducted Diameter (mm)97 (for 100 mm ducting tubing) Electrical ClassificationClass 1 Indoor/ Outdoor SuitabilityFor Indor Use Only Climatic ClassificationTropical Condition Gross Size (mm)300x180x236 Net Size (mm)297x177x234 Gross Weight (kg)1.99 Net Weight (kg)1.78 Speed selector included✓ Speeds2

As the need for fans that are used in applications subject to high temperatures is constantly on the increase, SEPA EUROPE is presenting its latest sleeve bearing fan equipped with MagFix technology that can be used for operating temperatures up to 85 °C. An added advantage is the extraordinary high life expectancy of 210.000 h (MTBF). This fan is not only available in the standard sizes but also as a tailor-made solution. With the high operating temperature of up to 85 °C, this innovative fan generation by SEPA EUROPE opens up a wide range of new applications for the user, not least the automotive sector. The term MagFix stands for magnetic fixation (positioning) of the fan propeller/rotor in sleeve bearing fans.

Thanks to the intelligent combination of DC fans with a fully integrated AC/DC converter, AC fans can now be operated at speeds that are independent of the power frequency. Up to 4500 rpm can be realized and the flow rate significantly increased if required. The EC generation in the dimensions 80mm to 280mm and with several different speeds replaces the previous AC fans in situtations where there is no DC voltage available and requires less power in the process. The previous AC fans can be replaced without restriction as the EC fans have identical dimensions and thickness. The versions that are smaller than 180mm have a wide-range input and can be connected without problem, worldwide to all AC voltage networks without need for further adaptation. This is underlined by the UL approval of the entire fan series.

The fan and cooling specialist SEPA EUROPE has now added three further models to its slimline radial fan series. The latest additions impress with their compact dimensions of 38 x 40 x 5 mm, 54 x 52 x 6 mm and 45 x 45 x 4 mm and have more than deserved the name „slimline“. All fans are equipped with the reliable Magfix sleeve bearings and have a service life of 210 000 h (MTBF) and 40 000 h /L10) at 40 °C. The PWM input in combination with the tacho output enables the speed to be controlled and monitored. It is not obvious at first glance, but the Model HY45AB05PNK00A tops with a pressure of 143 Pa. The new models will be included in the standard range and will therefore be available shortly from stock. SEPA EUROPE specializes in customized cooling solutions. Thanks to over 25 years of experience, SEPA EUROPE can offer you the appropriate solution for virtually every task.

Passive cooling solutions are usually too big. Small active heat sinks are the ideal solution. Stable light colours, a high life expectancy and low energy requirements are the unbeatable advantages of LED technology. However, whereas the energetic superiority comes virtually automatically, considerable investment must be made in thermal management to fulfil the demands on the colour values and service life. Only well cooled diodes can keep what they have promised in the long run. For optimum thermal management, SEPA EUROPE offers not only passive cooling solutions but also active heat sinks. Active cooling concepts usually provide the ideal solution when space is a problem. They are smaller and lighter, can attain the desired service life, are attractively priced and find space virtually everywhere. SEPA EUROPE already supplies its customers with fans that are adapted to the application in question and in some cases with special waterproof fans.

SEPA EUROPE, the experts for customized cooling solutions meets the highest expectations with its wide range of guards for axial fans. Modern high-performance fans operate at high speeds which increase the risk of injury. To enhance safety, SEPA EUROPE offers guards for axial fans in every required dimension. The well-designed guards of SEPA EUROPE are not only extremely stable but also improve the appearance of each fan. The high-quality surface (chrome-plated, powder-coated, zinc-plated or pure stainless steel V2A or V4A) stands for a longer service life and extensive protection against corrosion. We perfect the product with excellent finishing and a flawless surface without sharp edges. Additional advantage: The guards of SEPA EUROPE are aerodynamically optimized so that the fans can operate with optimum efficiency. A further advantage is the simple mounting by screwing to the fan.

- Low Pressure Radial Fan - Directly Coupled Motor. - Backward-Curved (BC) Blade Fans. - Revolvable Fan Case. - On Demand, Special Stainless Steel Manufacturing Is Available - Air Flowrate : 3.500 - 54.500 m³/h (Min. - Max.) - Pressure (Pt) : 40 - 265 mmss (Min. - Max.)

Powrmatic CECx Destratification fan