pressure transducer

...The pressure transducers of the 6L series have a small and compact design, making them ideally suited to OEM applications with limited installation space. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet. Pressure Ranges:0…10 to 0…200 bar Accuracy:±0,5 %FS Long Term Stability:±0,35 %FS Dimensions:⌀ 13 mm x 4,5 mm Temperature Range:-10…80 °C...

...food industry Mixing facilities for the chemicals industry Pharmaceuticals Cosmetics industry Bioengineering These miniature pressure transducers are made entirely of titanium and therefore have outstanding resistance to corrosion. These convert the pressure-induced deflection of the diaphragm into a change in electrical resistance, which can be amplified, measured and processed by external...

... chamber for pressure tests with environmental simulation. Depending on the chosen option, pressure change tests can generate up to 2,000 bar and 10 Hz. With the test circuit for hydrostatic and burst pressure tests, pressure ramps of up to 3,000 bar can be produced. For pressure tests according to EG79 / EU406 – Section 4.2 Impulse pressure transducer for small volumes up to 2,000 bar Displacement...

... pressure transducer can be optionally equipped with an auto-zero function, one or two limit contacts, an overload protection, or a stainless steel diaphragm for aggressive gases. Highest precision, maximum flexibility, robust construction – this makes the DPS a versatile tool and the ideal solution for demanding measurement tasks. Typical Areas of Application: ◾Monitoring of critical indoor climate ◾Machine and plant engineering ◾Heating | Ventilation | Air Conditioning ◾Filter monitoring ◾Measurement of flow velocities...

...Application Areas: Machine construction, hydraulic and pneumatic applications, injection molding industry, grease lubrication OEM applications, hydraulics and pneumatics, heavy industry and plant engineering, automotive industry Pressure switches, electronic: Simple pressure switches...

...High-pressure pump with pressure transducer - low stroke rate (22/min or 26/min) - max. continuous operating pressure 3,800 bar - main motors available from 22 kW to 74 kW - max. flow rate from 2.27 L/min to 7.56 L/min - easy and quick maintenance...

...The pressure sensors with M12-connection are ideally suited for measuring of static and dynamic relative pressure in liquids and gases. Name:Stainless steel pressure transducer Pressure measuring range:0...6 bar pressure measuring variant:relative pressure Burst pressure:18 bar Electrical connection:M12-Connector Process connection:G1/2" Output signal:0…10 V Raw material:ceramic measuring cell...

...Measurement nozzles are used to measure air flows. The effective pressure determination is carried out through an integrated Venturi nozzle. The volumetric flow rate can range from 50 to 4500 m³/h. Measurement nozzles are available in nominal diameters of 110 to 400 mm connection diameter. Standard materials available are PPs and PVC. Special materials are available upon request. For more information, please visit our website or contact us directly.

...F670LV is a breakthrough instrument able to leak test very large volumes using a new patented technology (Based on Pressure Decay) thanks to the high sensitivity of our latest pressure transducer. By using ATEQ’s F670LV Differential Pressure Decay leak Tester with DNC, it is now possible to detect pressure drops below 0.1 Pa/sec. Parts with very large volumes such as tanks, electrical car...

...The DMP 343 pressure transducer is designed for measuring very low overpressures as well as for vacuum applications. Suitable measuring media include non-aggressive, dry gases and low-viscosity, non-aggressive oils. The DMP 343 is characterized by excellent temperature behavior and outstanding long-term stability. A wide range of standardized output signals, electrical, and mechanical connection...

... can be used in almost all applications that would otherwise be considered impossible. From applications that cannot tolerate a reduced lifting capacity, to pistons with extremely small diameters, to cylinders with mechanical cushioning at the end position. Measurement range 0 … 1000 mm (39.37 Inch). Virtually no stroke loss for side mounting. Absolute measurement system. CANopen interface, analog: current and voltage. Operating voltage 9 … 32 VDC. Resistance to pressures up to 350 bar, pressure peaks up to 450 bar.

Design and distribution of tempering and cooling equipment, cooling systems and installations, blown film cooling systems, free coolers with and without adiabatic supplementary cooling, flow rate regulators, and magnetic separators for plastic granulate. Customized solutions and special equipment for complex cooling and tempering requirements are our particular strength. We also supply cooling d...

...Areas of use • All blind rivets and lockbolts up to a mandrel breaking force of 50 kN • Same performance and technical characteristics as the respective individual units in the TAURUS® series 1-4, 5-6 with different stroke • 3 metres hose length between pressure transducer and setting pistol Common technical data Operating air pressure: 5 to 7 bar Air hose connection: 6 mm (1/4“) Noise...

Manufacturing and distribution of weighing technology components, specifically load cells, force transducers, weighing modules, weighing and dosing controls, weighing indicators. Since 1965, the name BÜTTNER has stood for the highest quality, reliable operational safety, and sustainable customer service in the field of industrial weighing technology. "Wägezellen von Büttner sind super!".

...This economical differential pressure transducer is particularly suitable for applications in heating, air conditioning, and ventilation for filter and pressure control. An optional display allows for the direct on-site visualization of the measured value, expressed in Pa or kPa. An optional time constant (up to 4 s) enables the transducer to be used even in the presence of pressure fluctuations...

...Model No.: CMT46.5H15.5W-Al; Product Attributes : *High sound pressure level; *Highly reliable and rugged; *Lightweight construction. Technical parameter: Rated voltage: 24V DC; Operating voltage range: 1~30 V DC; Coil resistance: 19 ± 2 ohm; AC impedance @1KHz: 100 ± 25% ohms; S.P.L (1m/24V) min: 95dB; Frequency range: 300 ~ 3400Hz; Operating temperature: -40~+85 ℃.

... transducer input 4-20mA. Transducer measurement unit in Meters or Bar. Phase sequence control. Phase loss control. Maximum number of starts control. Network return delay. Alarm intervention delay. Auto reset control. Calculation of power factor correction capacitor in pF and KVAR. Voltage indication for each phase. Current indication for each phase. Motor hour counter indication Hm. Indication of the number of set starts. Frequency indication. Power indication in Kva, Kw, Kvar. Power Factor indication (CosFi).

...Melt Pressure Transducer with standardized output signal The DA Series melt pressure transducers are characterized by their high quality of workmanship and outstanding performance and are used in the plastic manufacturing and processing industries throughout the world. Their absolute reproducibility and stable measuring values contribute to our measurement accuracies. Application areas...

... transmitter is the proven GEMÜ CleanStar® technology • Operating medium is hermetically separated from the measuring transducer by a patented PFA double membrane • Free positioning of the manometer by 360° allows for individual user options • Production, assembly, calibration, and packaging in a cleanroom ISO 6 • Low dead space Connection type: Flare; NPT thread Drive type: without drive Max. operating pressure: 10 bar Max. medium temperature: 60 °C Min. medium temperature: 5 °C Nominal sizes: DN 4; DN 6; DN 10; DN 15; DN 20; DN 25...

... to be reduced 3/8" inlet and outlet connections perfectly compatible with oxygen hoses manufactured by Boscarol Allows a pressure transducer to be fitted on the outlet for measuring the nominal pressure of the kit The exchanger includes amounting plate for flush mounting in the ambulance. The plate is made of stainless steel and can be painted according to customer requirements The Boscarol cylinder exchanger is part of the oxygen kit and should be considered as a spare part...

...Potentiometric position transducer; robust design with metal flanges and pressure equalization system with GORE-membran; long life span and high adjustement speed; easy to assemble via low-backlash pivot heads with a large angle of freedom; High protection class...

...The CONDA420 conditioners amplifiers provide standardised signals in current and voltage from every load cell, force transducer and torque sensor based on straingauge technology. Sensor excitation 10 V (120 mA max.) available for up to 4 x 350 ohms. Load cells connected in parallel o DIN rail mounting Reference:COND-A420 Input range:Wheatstone bridge (4 or 6 wires connection (sense)) Output:4(0...

...Miniature Pressure Transducer (13.2x8x6.7mm or 13.2×12.6×4.1mm) Straight Vertical or Horizontal Pressure Ports Differential or Absolute configuration Standard temperature compensated (0 to 70ºC), other possible High long-term stability High accuracy down to 0.75% (all effects included) Digital I2C or SPI output Pressure range: 0-1 mbar to 15 bar Pressure media: all non-corrosive gases and liquids...

... — Hydraulic connection for pressure transducer — Mechanical connection — Tolerance compensation Position offset 1.5 mm Angle offset 8° — E-motor — Monitoring of torque and angle during threading and unthreading — Hydraulic hollow piston cylinder Stroke length 12 mm Setting force up to 58 kN — Quick-change system For fast handling and low-maintenance operation Low tool costs by using DIN screws as pulling tools (optional)...

...This Filter Press installation has a 2,500 ltr Feed tank with agitator, a 3m3 / hr Mono-Pump to feed the Press. There is a 10 bar pressure transducer in the feed line to tell out PLC control panel that the press is full and to start the Automatic Emptying of the Filter Press.

... operational temperatures and admissible pressure resistance for even the most demanding applications. The transducer provides a direct 4 - 20 mA output signal corresponding to the measuring range, as well as VDC temperature output. As an option Magtrol offers the CST 113 Signal Converter, which allows the complete chain to be calibrated according to the specific needs, either in current or voltage...

... Operation Storage of up to 15 Test Profiles with up to 18 Steps Pressure Gauge for Bubble Tower Premium Controls Features Notebook Computer with Color Screen, PC-compatible Seven Pre-loaded Test Methods for Immediate Operation Display of up to 50 Test Profiles with up to 100 Steps Display Graphing on Notebook Monitor Operator Interface/Datalogging Software Pressure Transducer for Bubble Tower Solution...

... control technology for pump control. Magnetic-inductive flow meters are reliable and economic compact units or installation in the pressure line and are available in two basic versions: Sensors for pipe installation with integrated measuring transducer and on-site display as a compact unit Sensors for pipe installation with separate measuring transducer. With this version, the measuring transducer can be located separately on the wall in the service building or as a fitted housing directly in the AWAcontrol control cabinet. ...

...The OPTIFLUX 4000 is a magnetic-inductive measuring transducer. In combination with the measuring converters IFC 050, IFC 100, or IFC 300, it forms the magnetic-inductive flow measuring devices OPTIFLUX 4050, OPTIFLUX 4100, and OPTIFLUX 4300 for simple to demanding applications with aggressive or abrasive media or other conductive liquids. Liquid::for liquids Technology::magnetic-inductive Additional Features::series Temperatures::up to 180 °C / 356 °F Pressure::up to 2500 bar...

...Product Description Pressure Transmitter Output Signal: 4-20mA (Two-Wire) Accuracy Class: 0.5% Our pressure transmitter DT1 is available with either an analog output signal of 4-20 mA or 0-10 volts. This universally applicable pressure transducer (IP65) with an accuracy of 0.5% can be used for most liquids and gases. Application areas include, for example, hydraulics, pneumatics, plant and...