laboratory facilities

...With our in-house calibration laboratory, accredited according to DIN EN ISO/IEC 17025:2018, we provide calibration services for gas meter testing facilities. We cover the areas of gas volumetric flow measurement, temperature, pressure, relative humidity, and frequency measurement. This allows us to realize all relevant measurement parameters for a complete gas meter calibration system.

... integrated 24-bit ADCs, the PLC.D sensors close the gap between industrial manufacturing and high-precision laboratory equipment. Measurements can be carried out in a simple yet safe way. RS-485 and USB are available as optional connections for this purpose. The data evaluation takes place directly in the PLC.D sensors, the measured values are protected against transmission errors by a CRC-16 check sums. Operation voltage:24 V (RS-485 / RS-232) Dimensions:80 x 40 x 20 mm Weight:150 g Connector:Built-in plug, M8, 8-pin Response time, max:200 ms...

...Schellbach burette by Schilling/Bürkle with original Bürkle dosing system. The burette is essential for use in laboratories, galvanizing industries, water treatment plants, purification facilities, field research, etc. Precision dosing via a push button, exact titration with a micro-screw and precision nozzle. The graduation corresponds to class B (tolerances according to DIN EN ISO 385). Glass burette: borosilicate 3.3 Parts in contact with the medium: PE, PP, natural rubber, borosilicate glass...

...The fact that the banks are mobile and wheeled in modular laboratory systems provides the advantage of easy access for potential inspections of electrical and water facilities. Additionally, this feature offers great convenience during laboratory cleaning. The shelving systems consist of service columns and a horizontal shelf with a service unit that shares the same physical properties. It is...

... modular components can be transported to a construction site and assembled easily without the need for lengthy on-site projects. Whenever organizations need a new rehabilitation clinic, emergency care clinics, temporary medical, labs and patient care facilities, operating room, pediatric care center, radiology department, hospital extensions, laboratory, diagnostic center, or other medical...

... Acker Raum-Systeme GmbH are available in various sizes and configurations to meet the individual needs of research institutions. The containers are equipped with modern laboratory facilities and provide a comfortable and safe environment for research and experiments. They are energy-efficient and can be equipped with additional features such as air conditioning or solar systems. The containers are...

The company HiTec Zang was founded in 1979 by Prof. Dr.-Ing. Werner Zang initially as an engineering office. In the first years, custom hardware developments in analog and digital technology as well as programming work were carried out on behalf of clients. With the emergence of the first operational "home computers", the development of intelligent measurement data acquisition systems began. The c...

...Task of the Neutralization System The Mini-Fix system is designed for decentralized use under the laboratory table and is characterized by its compact size, user-friendly operation, robust construction, and optimal price-performance ratio. The Mini-Fix neutralization system can also be used for cyanide and chromium detoxification through the use of special electrodes and chemicals. Process...

...Development and Innovation Process simulation, complemented by laboratory tests in our in-house laboratory and pilot plant, forms the basis for the safe and optimal design of our systems. Our Test Facilities Falling Film Evaporator 0.2 m² Thin Film Evaporator/Dryer 0.2 m² Forced Circulation/Heat Pump Evaporator Crystallizer Rotary Evaporator Rectification Evaporator Installations: Packing, Slot Bottoms Extraction Columns (Ø100/ Ø150) Mixer Settler ... are available upon request.

...DÔM LABS as a cosmetic wholesaler in Marseille: Cosmetics made from organic raw materials Quality/price ratio Responsive customer service with a WhatsApp hotline available 7 days a week State-of-the-art facilities Competitive minimum order Reduced lead time As a laboratory, we offer a turnkey service to kickstart your business. As a cosmetic wholesaler in Marseille, we...

...The essential metrology instrument for torque measurements in the laboratory or production. The Barimètre® operates via a PC with a built-in Windows operating system. This ensures the device has ideal connectivity as well as autonomous operation.

Since 2018 we have been specifying, designing, and installing Fume Cupboards, Extraction systems, providing COSHH safety testing and Fire trace fire suppression systems throughout the UK - to organisations which include: - Pharmaceutical - Educational - Research & Development - Health and Diagnostic Laboratories - Facilities Management. We are Fully insured and also a Member of Constructionline so...

... The ongoing collaboration between the Architecture, Lab Planning, and Engineering departments achieves a maximum level of uniqueness that translates into high architectural value, primarily supported by the design of laboratories and their facilities. Investing in sustainable architectural solutions focused on the life cycle of laboratory buildings brings benefits in social, environmental, and economic aspects.

...For 25 years, we have been designing, manufacturing, and marketing ranges of cosmetic products under our own brands and under our clients' brands. We control the entire production chain, from R&D to design, from manufacturing to delivery. All steps are carried out in our facilities in the south of France. Our integrated research laboratory has a rich portfolio of diverse formulas, allowing us to...

... laboratory for cannabinoid content and to ensure no unwanted contaminants are inside the product. Part of the CiiTECH portfolio of brands. Provacan is CiiTECH's flagship brand and has become one of the highest trusted brands in the UK. CiiTECH is a cannabis research company that uses its expert knowledge through leading researchers and key partnerships to develop brands and cannabis products for niche markets.

...Our calibration laboratory is set-up to perform measurements of impedance and insertion loss over the frequency range 20Hz to 500MHz with automated systems to offer cost-effective results. Products manufactured by Cranage EMC Technology Limited are also backed up by extensive calibration facilities for the measurement of inductance, capacitance, and resistance. Many of our products have been...

...Pilot units serve as the intermediary link between laboratory-scale distillation units and industrial-scale ones. The primary objective of pilot-scale distillations is to generate data for scaling up and process development. Additionally, our pilot systems can also be used for the production of small quantities of products. The experience gained from experiments with a variety of products in our own pilot facilities has influenced the design and continuously improves the quality and performance of our systems.

...Provacan Premium gold is a range of highly reputable and top quality CBD products. The 300mg CBD oil spray is expertly crafted and contains 0% THC. An ideal product for consumers looking to start their CBD journey with a product that they can rely on for all their CBD needs. This quality assured product is manufactured in ISO/GMP facilities and has been tested by a third party laboratory for...

...At the Design Manufactory, we understand the unique requirements of commercial interiors such as warehouses, food production facilities, and laboratory setups. Our customized solutions are designed not only to optimize the use of space but also to meet the specific needs of your business. From efficient storage solutions to hygienic designs for food production sites and laboratories, we pay...

...A stable production process with valid and reproducible product qualities is only possible with 100% reliable and sustainable cleaning of all facilities and systems.

...Gast diaphragm units require no lubrication making these units the perfect choice of installation for critical applications found in medical facilities, laboratory equipment, air sampling devices, portable gas detectors and dental equipment. With their outstanding performance, durability and flexibility, the varied range of Gast oil-less diaphragm air compressors and vacuum pumps are ideal for industrial applications too.

...The AES vertical floor-standing laboratory autoclaves with top loading access cover the fundamental needs for general labware sterilization in many industries, educational and medical facilities and research institutes. They are intended for the sterilization of a wide range of liquid and solid materials such as culture media, glassware, plastics, metallic equipment, waste bags, and other...

... caps - Lipstick and mascara containers - Coronary testers / rapid blood tests - Sterile caps / membrane seal systems - Components for inhalers - Surgical disposable razors Testing and inspection lines for: - Pacemakers - Dialysis filters Hygienic design is also important here. Back in 2008, we established a clean room in line with Class C / ISO Class 7 requirements in our manufacturing facilities specially for this application area.

... as system cleaning and disinfection. Turkey's first Legionella Analysis Laboratory, accredited by the Turkish Accreditation Agency (Türkak) according to the TS ISO 11731 "Water Quality - Detection and Enumeration of Legionella in Water Systems" standard method; • Total Aerobic Colony Count in water, • Total Coliform Count in water, • E. Coli Count in water, • P. Aeruginosa Count in water, • Analysis of Legionella spp. counts in industrial water systems, among other analyses of microorganisms affecting human health and water quality.

...Variac is an autotransformer with adjustable voltage. It has a coal wheel (a sliding brush in simple variants) that allows you to change the voltage from zero to maximum without any problem. The variac serves to provide the desired electrical energy to the laboratory facilities and to compensate for the voltage and other needs of the network. Variac is an indispensable device when installing and testing electrical devices. The first-class manufacturing is made of a silicon sheet core and varieties of electrolytic copper are produced as a special group according to the customer's request...

Waldmann – Engineers of Light Those who are situated in the Black Forest must shine particularly bright. For over 90 years, Waldmann has been developing some of the best lighting systems in the world in Villingen-Schwenningen. However, light from Waldmann is not an end in itself. It serves. To create. To build. To expand horizons. To awaken. To regulate hormones. Maximum quality and optimal user-...

...COMBER Pressofiltro® Series PF 5 - PF 100 Pilot Plant Pressofiltro pilot units are multipurpose tools for pilot plant or laboratory applications as well as for small scale production facilities. Versatile use of the equipment, cGMP compliant design, containment, effcient and complete cleanability, complete dischargeability, highest drying effciency, process safety and monitoring, ease of...

... complies with the EN 16630 standard and is certified by an external laboratory. Posts:Structure Steel, diameter 88.9 mm, thickness 3 mm Anti-corrosion treatment:Hot-dip galvanising Finish:Raw or powder coated Screws:stainless steel, single diameter (10 mm), anti-theft and anti-vandalism HPL Panels:exterior quality - thickness 13 mm, anti-UV and anti-graffiti treatment...

...The central vacuum systems of the ZM series are a reliable, energy-efficient vacuum source wherever a constant, variable vacuum consumption is required. They can be used under the most demanding conditions in the industry. Specifically designed for use in hospitals and other medical facilities, these systems are developed to meet the requirements of DIN ISO 7396-1 and comply with these standards...

... storage needs (pharmacy refrigerators, cold rooms, freezers...), our flexible solution will integrate perfectly with all your facilities. Make your daily operations easier with reliable equipment (uncertainty up to ± 0.05°C) designed to meet your industry standards (CE compliance, BPx and BPD, EN 12830 and EN 15189). Additionally, we also provide our clients with calibrated probes according to 17025. Low measurement uncertainty: up to ± 0.05°C Certified: EN 12830, 15189, BPx and BPD Calibration: according to 17025...