fluid force

...complete with an integrated positive stop a winner. Furthermore, the use of a side load adapter allows impact angles of up to 25°. Miniature shock absorbers capable of universal mounting even inside a... Energy capacity:136 Nm/cycle Energy capacity:68,000 Nm/h Effective weight min.:9.0 kg Effective weight max.:136 kg Return Force min.:5 N Return Force max.:10 N Return Time:0.6 s Side Load Angle max.:2...

... romantic clash between natural and artificial forces. Inspired by the slow geomorphological action of rivers, Levico treats light as a liquid, an erosive force capable of shaping the luminous body itself. Like a high-altitude spring, the light source is isolated and concealed, and like the water of a river, light carves its path through the luminous body, leaving behind hollows and depressions that soften its diffusion.

...This micro air valve was developed specially as a small signal element for mounting in confined spaces. Its design allows a big orifice at small overall dimensions. Pre-controlled by an air outlet in the integrated tube nipple it only needs a minimum of actuating force to shut off the pilot port. Function:3/2-way NC  Pressure range:1.5 - 8 bar Nominal orifice:2 mm Kv-value:0.8 l/min Actuation type:mechanically actuated, plunger  Type of pneumatic connection:M5  Ambient temperature:-10 ... +60 °C Materials:Polyamide, Al, NBR ...

...A sensitive, waterproof capacitive tactile sensor array designed to capture instantaneous and actionable spray pattern and spray pressure data generated by sprayed fluids or gases. Capture spray distribution and impact pressure and accurately identify the location and pattern where sprayed fluid or gases land. Available in two application variants, Spray Pressure or Spray Pattern, and optimal for use in situations where spray pressures are infinitesimally small.

...A centrifugal pump is a flow machine (pump) with a rotating shaft that uses dynamic forces to transport a fluid. The radial centrifugal pump utilizes not only the tangential acceleration of the medium but also the centrifugal force that occurs in the radial flow.

... vehicles requiring high braking force and easy maintenance. Drum brakes offer an economical and reliable solution for the braking needs of utility vehicles and heavy trucks. Due to their simple and robust design, they require less maintenance and are easy to repair. Additionally, drum brakes are often preferred for their ability to provide consistent braking power, even in challenging driving conditions. By choosing this system, customers can be assured of optimal safety and performance.

...The longest fluid damper from ZIMMER to date. A new technology allows the damper to be equipped with a certain level of intelligence. This means that damping force is applied exactly when it is needed.

... transfer optional:fully automatic drilling, wireless remote control, air conditioning L x W x H [mm]:6.700 x 2.300 x 2.570 Weight incl. rods [kg]:14.350 Rod magazine contents [m]:225 Inclination angle:12°–30° Thrust and pullback force [kN]:180 Max. torque [Nm]:7.500 Max. spindle speedl [rpm]:200 Pilot bore Ø [mm]:115 Drill rod Ø [mm]:73 / 63 Effective rod length [mm]:3.000 Weight of drill rod [kg]:42...

...{"features":["Fluid-assisted","Continuously expandable","Ready to use from trenches and from the surface","Pressure and pulling force of 4 tons","For pipes with a diameter of 50 to 250 mm over lengths up to 100 meters","Compact dimensions: L=1,900, W=750, H=950 mm","Available optionally on a crawler vehicle","Radii of 30 m are possible","Vibration-free/low noise","With hydraulic unit and bentonite mixing plant transportable by truck","Environmentally friendly, closed system, operated with bio-oil","Client-friendly pipe laying method","Made in Germany"]}...

...Industrial centrifuge designed for effectively separating metal chips from cutting fluids. The PRAB Metal Chip Wringer/Centrifuge uses 600G’s of centrifugal force to spin fluid from metal chips. This process is the most cost-effective solution for producing dry metal chips—which are more valuable to the scrap dealer. Wringers also help to reclaim up to 98% of spent cutting fluid for recycling and reuse. Metal chip wringers/centrifuges handle various types of metal scrap, including aluminum, brass, cast iron, steel, stainless steel, and more.

...Hydro-pneumatic blind rivet nut setting tool with setting process monitoring - FireFox® 2 C – With setting process monitoring This tool is based on the proven TAURUS® C model. Here the setting process is analysed via integrated electronics using stroke and force sensors. The user can defi ne an OK window by means of a special software. A coloured LED on the tool shows the results of the...

... 40° C, we use a pastelike dispersion as damping medium. This medium solidifies at rest to an apparently solid mass and only becomes flowable under the action of force. When the load ends, it returns to its apparently solid original state. This dispersion has the following properties chemically a colloidal solid dispersion physically a nonNewtonian pseudo plastic Bingham fluid with viscous properties It is a paste or better a coagulation structure and deforms plastically under mechanical stress.

...Hydraulic load cells of the HMD series are robust measuring instruments that gauge axial compressive forces with median accuracy. The force is transferred by pressure pistons analogously and via the hydraulic fluid to a manometer with a kN-indicator scale. The measuring system is autarkic so there is no need for external or supplemental power. Therefore, static and dynamic forces can be...

... it has a limitation on the combination of orifice and pressure rating it can provide for a given solenoid force. There are some exception designs which are called pressure balance solenoid valve design but apart from that most of the 3 way direct acting solenoid valve design has this limitation. Model:P3005 Pressure Range (Bar):0-10 Orifice Size (mm):5 Port Connection:3/8" | 1/2" Solenoid:Weather...

...The ploughshare mixer for batch operation uses the mixing and fluid process introduced to mixing technology by Lödige. The ploughshare shovels in special arrangement on a mixing shaft in a horizontal, cylindrical drum rotate to the wall. Their peripheral speed and geometric form are coordinated in such a way that the mix is moved out of the product bed against the centrifugal force and in axial...

...›› A simple handling system for aspiration and injection of solutions and medications ›› The optimized pressure balance and reduced contamination risk are just a few advantages of this product ›› The spikes are also available with a safety valve ›› Low suction volume and low puncture force for excellent performance during the suction process ›› One-handed operation for opening and closing the...

...Ultra-high viscosity and vacuum emulsifying mixer adopts a combination of high emulsifying , low speed stirring and combining. In the process, the material is processed repeatedly with heavy shearing force, compressing, grinding, homo-mixing and dispersing. The stirring paddles scrape off the material attaching on the inner surface as they rotate to increase the effect of homogeneous mixing. Thus, under high speed of processing, high viscosity, fine particles and homogeneous fluid with soft and fine color can be obtained in a single machine.

...Carry out your broaching operations with our new "Mag Drill" and take it to your job sites. Hand drills are not suitable for broaching. They lack the required spindle rotation speed and motor power. Additionally, generating sufficient axial force and remaining stable to work in line is impossible with a hand drill. That’s why we designed our portable magnetic drill. This drill is manufactured...

... dampers XLC cylinders available upon request: Operating temperature down to -40°C XLCD cylinders with rod wiper available upon request: Operating temperature down to -40°C Bore diameter: 40 mm Function: Double-acting Rod thread: M12 x 1.25 Standard: ISO 15552 Connection: G1/4" Pushing force in Newtons at 6 Bar: 678 Pulling force in Newtons at 6 Bar: 570 Fluid used: Filtered compressed air, lubricated or not Operating pressure: 1 to 10 bar Temperature range: -20°C to +80°C...

...Single-acting hydraulic cylinder Robust screw construction Compact design Good price/performance ratio Wide range of applications 8 types of mounting options Optional upgrades include: Synchronization function Stroke measurement system Nominal pressure: 200 bar Piston rod diameter: Plunger from 30 to 100 mm Max. stroke length: up to 3,000 mm Max. pressure force: 235.6 kN Pressure fluid: Mineral oil according to DIN 51524 HL, HLP Pressure fluid temperature range: -20 to +80 °C Installation position: Any Stroke speed: Standard 0.5 m/s (depending on power connection)...

...No more difficulties in cleaning your IBCs to 100%! No need to twist and turn to reach the top. The washing lance fits all IBCs, and with its S40 washing head, cleaning is done at 360°. The rotation of the TANKOS40 washing ball is powered solely by fluid pressure. Water consumption is reduced, and cleaning and spraying results are improved thanks to maximum impact force. The CL1000 washing...

... systems, machine tables, or base plates of your own system. Centering accuracy: +/- 0.02 mm. It is recommended to use a torque wrench to achieve controlled clamping force. Properties: Clamping spindle and spindle nut in one piece Shoulders and threads for fixing the attached jaws Reversible jaws (accessories) with lateral threading for workpiece stop allow for a wide clamping range Good chip and cutting fluid evacuation Reference: 41102 Centering accuracy: +/- 0.02 mm...

... as industrial cleaning, jetting or process engineering. SPECIAL FEATURES - Capacities at 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on fluid - Speed range 10-100% depending on rod force - Forced lubrication gearbox (> 75 kW with oil cooler) - Standard gear ratios i = 2.75 - 3.22 - 3.68 - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc. on request - Vertical operation possible Pressure:max. 3100 bar Flow:283 l/min Power Input:max. 90 kW Weight:255 kg...

...In the case of the 2N pipe fitting, the pipe is brought up against the inner side of the threaded fitting, and the connection is sealed using a sealing ring. The stop is achieved through a cutting ring, which embeds itself into the flexible or rigid pipe as the knurled nut is screwed onto the threaded connection body. This creates a force-fit connection with a perfect seal, which can be loosened at any time. Thanks to its design, it avoids dead volumes and does not affect the flow path. The internal diameter of the fitting matches that of the pipe. Fluid resistance: high...

...We manufacture technical vehicle components with a closing force of up to 220 tons. (Interior, under the hood). For example, we produce fluid connectors, light guides, and connectors. Most products consist of multiple components. We offer you the option to receive your products fully assembled using semi- or fully automated assembly lines - simply brilliant!

...Series / Type 63 2/2 way externally controlled valve. Function: In rest position, the valve is closed by spring-action and fluid pressure. When the actuator is pressurized, it lifts the control piston and simultaneously raises the valve disc – the valve opens. Valves of this type can also be supplied with the function of being opened by spring force. Additionally, there is a double-acting piston actuator that allows for flow in either direction. Technical Data: Connection: G 1/4" - G 3", DIN ISO 228 *1/2" + 3/4" Rg5 DIN 2999 Installation position:...

...SISTO-CM409 ● Multi-way valve ● Unique construction with embedded membrane ● Force distribution spiral on the membrane from MD65 ● Manual operation or with pneumatic actuator ● Upstream/downstream and external sealing ensured by the membrane. Only the body and membrane are in contact with the fluid ● Connections: welding ends, clamps, specific ● Body materials: forged stainless steel, special...

...Hydrostatic Gas Springs with Compressible Nitrogen for Various Spring Forces In other hydrostatic products, a compressible fluid is used. In gas springs, nitrogen gas is compressed to generate the spring force. This technology allows for the creation of different spring forces and characteristics.

...An interface for compressed air, gases, fluids, vacuum, electricity, and electronics - Maximum modularity through freely configurable couplings - Confusion-proof due to integrated codings in the housings - Easy tool-free assembly and disassembly - Reduction of assembly force through locking brackets - Savings on machine setup times - Compatible with Eisele adaptive inserts - Coupling and nut...

...The double acting Turcon® Glyd Ring® is a combination of a Turcon® based slipper seal and an energising O-Ring. It is produced with an interference fit which together with the squeeze of the O-Ring ensures a good sealing effect even at low pressure. At higher system pressures, the O-Ring is energised by the fluid, pushing the Turcon® Glyd Ring® against the sealing face with increased force. Temperature:-45 °C to +200 °C Size Range:3 mm to 2600 mm Speed (max):15 m/s pressure (max):60 MPa...