fluid force Germany

...complete with an integrated positive stop a winner. Furthermore, the use of a side load adapter allows impact angles of up to 25°. Miniature shock absorbers capable of universal mounting even inside a... Energy capacity:136 Nm/cycle Energy capacity:68,000 Nm/h Effective weight min.:9.0 kg Effective weight max.:136 kg Return Force min.:5 N Return Force max.:10 N Return Time:0.6 s Side Load Angle max.:2...

...This micro air valve was developed specially as a small signal element for mounting in confined spaces. Its design allows a big orifice at small overall dimensions. Pre-controlled by an air outlet in the integrated tube nipple it only needs a minimum of actuating force to shut off the pilot port. Function:3/2-way NC  Pressure range:1.5 - 8 bar Nominal orifice:2 mm Kv-value:0.8 l/min Actuation type:mechanically actuated, plunger  Type of pneumatic connection:M5  Ambient temperature:-10 ... +60 °C Materials:Polyamide, Al, NBR ...

...A centrifugal pump is a flow machine (pump) with a rotating shaft that uses dynamic forces to transport a fluid. The radial centrifugal pump utilizes not only the tangential acceleration of the medium but also the centrifugal force that occurs in the radial flow.

...The longest fluid damper from ZIMMER to date. A new technology allows the damper to be equipped with a certain level of intelligence. This means that damping force is applied exactly when it is needed.

... transfer optional:fully automatic drilling, wireless remote control, air conditioning L x W x H [mm]:6.700 x 2.300 x 2.570 Weight incl. rods [kg]:14.350 Rod magazine contents [m]:225 Inclination angle:12°–30° Thrust and pullback force [kN]:180 Max. torque [Nm]:7.500 Max. spindle speedl [rpm]:200 Pilot bore Ø [mm]:115 Drill rod Ø [mm]:73 / 63 Effective rod length [mm]:3.000 Weight of drill rod [kg]:42...

...{"features":["Fluid-assisted","Continuously expandable","Ready to use from trenches and from the surface","Pressure and pulling force of 4 tons","For pipes with a diameter of 50 to 250 mm over lengths up to 100 meters","Compact dimensions: L=1,900, W=750, H=950 mm","Available optionally on a crawler vehicle","Radii of 30 m are possible","Vibration-free/low noise","With hydraulic unit and bentonite mixing plant transportable by truck","Environmentally friendly, closed system, operated with bio-oil","Client-friendly pipe laying method","Made in Germany"]}...

...Hydro-pneumatic blind rivet nut setting tool with setting process monitoring - FireFox® 2 C – With setting process monitoring This tool is based on the proven TAURUS® C model. Here the setting process is analysed via integrated electronics using stroke and force sensors. The user can defi ne an OK window by means of a special software. A coloured LED on the tool shows the results of the...

... 40° C, we use a pastelike dispersion as damping medium. This medium solidifies at rest to an apparently solid mass and only becomes flowable under the action of force. When the load ends, it returns to its apparently solid original state. This dispersion has the following properties chemically a colloidal solid dispersion physically a nonNewtonian pseudo plastic Bingham fluid with viscous properties It is a paste or better a coagulation structure and deforms plastically under mechanical stress.

...Hydraulic load cells of the HMD series are robust measuring instruments that gauge axial compressive forces with median accuracy. The force is transferred by pressure pistons analogously and via the hydraulic fluid to a manometer with a kN-indicator scale. The measuring system is autarkic so there is no need for external or supplemental power. Therefore, static and dynamic forces can be...

...The ploughshare mixer for batch operation uses the mixing and fluid process introduced to mixing technology by Lödige. The ploughshare shovels in special arrangement on a mixing shaft in a horizontal, cylindrical drum rotate to the wall. Their peripheral speed and geometric form are coordinated in such a way that the mix is moved out of the product bed against the centrifugal force and in axial...

...›› A simple handling system for aspiration and injection of solutions and medications ›› The optimized pressure balance and reduced contamination risk are just a few advantages of this product ›› The spikes are also available with a safety valve ›› Low suction volume and low puncture force for excellent performance during the suction process ›› One-handed operation for opening and closing the...

...Single-acting hydraulic cylinder Robust screw construction Compact design Good price/performance ratio Wide range of applications 8 types of mounting options Optional upgrades include: Synchronization function Stroke measurement system Nominal pressure: 200 bar Piston rod diameter: Plunger from 30 to 100 mm Max. stroke length: up to 3,000 mm Max. pressure force: 235.6 kN Pressure fluid: Mineral oil according to DIN 51524 HL, HLP Pressure fluid temperature range: -20 to +80 °C Installation position: Any Stroke speed: Standard 0.5 m/s (depending on power connection)...

... as industrial cleaning, jetting or process engineering. SPECIAL FEATURES - Capacities at 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on fluid - Speed range 10-100% depending on rod force - Forced lubrication gearbox (> 75 kW with oil cooler) - Standard gear ratios i = 2.75 - 3.22 - 3.68 - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc. on request - Vertical operation possible Pressure:max. 3100 bar Flow:283 l/min Power Input:max. 90 kW Weight:255 kg...

...In the case of the 2N pipe fitting, the pipe is brought up against the inner side of the threaded fitting, and the connection is sealed using a sealing ring. The stop is achieved through a cutting ring, which embeds itself into the flexible or rigid pipe as the knurled nut is screwed onto the threaded connection body. This creates a force-fit connection with a perfect seal, which can be loosened at any time. Thanks to its design, it avoids dead volumes and does not affect the flow path. The internal diameter of the fitting matches that of the pipe. Fluid resistance: high...

...We manufacture technical vehicle components with a closing force of up to 220 tons. (Interior, under the hood). For example, we produce fluid connectors, light guides, and connectors. Most products consist of multiple components. We offer you the option to receive your products fully assembled using semi- or fully automated assembly lines - simply brilliant!

...Series / Type 63 2/2 way externally controlled valve. Function: In rest position, the valve is closed by spring-action and fluid pressure. When the actuator is pressurized, it lifts the control piston and simultaneously raises the valve disc – the valve opens. Valves of this type can also be supplied with the function of being opened by spring force. Additionally, there is a double-acting piston actuator that allows for flow in either direction. Technical Data: Connection: G 1/4" - G 3", DIN ISO 228 *1/2" + 3/4" Rg5 DIN 2999 Installation position:...

...Hydrostatic Gas Springs with Compressible Nitrogen for Various Spring Forces In other hydrostatic products, a compressible fluid is used. In gas springs, nitrogen gas is compressed to generate the spring force. This technology allows for the creation of different spring forces and characteristics.

...An interface for compressed air, gases, fluids, vacuum, electricity, and electronics - Maximum modularity through freely configurable couplings - Confusion-proof due to integrated codings in the housings - Easy tool-free assembly and disassembly - Reduction of assembly force through locking brackets - Savings on machine setup times - Compatible with Eisele adaptive inserts - Coupling and nut...

...The double acting Turcon® Glyd Ring® is a combination of a Turcon® based slipper seal and an energising O-Ring. It is produced with an interference fit which together with the squeeze of the O-Ring ensures a good sealing effect even at low pressure. At higher system pressures, the O-Ring is energised by the fluid, pushing the Turcon® Glyd Ring® against the sealing face with increased force. Temperature:-45 °C to +200 °C Size Range:3 mm to 2600 mm Speed (max):15 m/s pressure (max):60 MPa...

...The robust one-piece drill rods allow for a bending radius of 22 meters. Two types of mixing plants are available for preparing the drilling fluid. The hydraulic power pack is also suitable for other applications and can be individually adapted to the respective purpose. Model: MT 9x12 Dimensions (l x w x h) [mm]: 1,350 x 600/1,020 x 1,300 Weight: 500 kg Max. Torque: 1,250 Nm at 200 bar Max. Speed: 125 rpm Max. Pull/Push Force: 90 kN at 160 bar / 80 kN at 160 bar...

As a family-owned business, we produce and distribute turned parts, standard parts, and semi-finished products in the fields of connection, fluid, assembly, and manufacturing technology at our location in Pforzheim. Our core competence lies in the production of turned parts, among others, for the automotive, electrical, and plastics processing industries. With our expertise from over five decades...

... between 0.10 and 0.70 mm. All of our saws utilize gravity and/or weights as a method to achieve and maintain consistent feed speeds. Additionally, all have a continuously variable speed control for the wire. Coolant is not required at all; however, we recommend using our cleaning fluid to remove loose particles from the diamond grains. well Diamantdrahtsägen exert only minimal force on the workpieces. Very little heat is generated, which is dissipated through the wire to the drum.

... for lifting - Air spring calculation for vibration isolation - Gas spring calculation - Gas spring configuration - Metal cushion calculation for vibration isolation - Elastomer buffer calculation - Elastomer spring calculation for vibration isolation CAD 2D CAD 3D Upon request, we can provide diagrams for force-displacement and displacement-time.