alumina ceramic

... of sizes and shapes of component. In addition it can be readily joined to metals or other ceramics using metallising and brazing techniques. Alumina based ceramics are by far the largest range of advanced ceramics made by INNOVACERA. Due to the important combination of properties, we have thoroughly researched the behaviour and characteristics of our Alumina products to give you the best possible component. Typical Alumina characteristics include: Good strength and stiffness Good hardness and wear resistance Good corrosion resistance Good thermal stability Excellent dielectric properties...

...Hollow alumina macrobeads have the same technical characteristics as aluminum oxides. Ideal for lightening and weighting your special loads and ceramics, improving their wear resistance, temperature resistance, or abrasion resistance, enhancing the lifespan of your products and materials, etc. There are numerous versions of hollow alumina macrobeads, with formulas that are fully customizable...

...Precision Ceramics has introduced a new and exciting range of advanced ceramic tubes and insulators ideally suitable for thermocouple protection in high temperature measurement applications. The alumina-based tubes are used throughout many industries to aid monitoring the stability and performance of production processes especially those within hostile and aggressive chemical environments at temperatures up to 1,700°C. They are manufactured to DIN V ENV 12212 and are very strong, organically inert and well proven in a wide field of applications.

... a U channel means that light which would normally be wasted i.e. shining backwards is now refocused down into the filters and light guides. Knight Optical provides ceramic reflectors which are typically moulded from alumina. This choice of material is down to its ability to withstand thermal stresses and high reflectivity values. For more information read PDF...

... easy wiring. • One-piece housing withstands great stresses. • Housing of high purity alumina oxide. Reliable Connection Conductor Diameter:0.1 mm to 0.6 mm Max. Cable Diameter:4.5 mm Temperature Load:Max. 650 °C. Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:White housing with colour dot as designation...

...For further data on the product, please refer to the data sheet or contact us. - Mixed alumina type WIWOX® RK has a low ferrite content and is particularly suitable for applications where a high consumption of blasting abrasives cannot be avoided. Mixed Alumina is produced from ceramic grinding wheels and reclaimed alumina dust from the blasting and grinding industry. It consists of a mixture of white, pink and brown alumina, and is an iron-free alternative for many sectors of the blasting and grinding industry.

...Low-calcined, medium-calcined, medium-high, and high-calcined clays for cleaning or polishing, as well as for ceramic and refractory applications.

...Ceramics Material95% Alumina Ceramics Length48.0mm or Custom Ceramics Diameter8.8mm or Custom Wire MaterialSilicone rubber fiberglass sleeving Wire Length750mm or Custom ColorWhite Electrode materialOcr25Al5 Cr20Ni80 Electrode LengthCustom Electrode Diameter7.2mm Product name48.0mm ceramic length Silicone rubber fiberglass sleeving gas stove ignition electrode Used for gas stove...

...gas type independent, pressure signal. INFICON capacitance manometers use an ultra pure alumina ceramic diaphragm which is corrosion proof. The advantages of the ceramic sensor are better signal stability, faster recovery from atmosphere, short warm up time and an extraordinary lifetime. INFICON CDG are high quality, cost effective pressure sensors for demanding semiconductor, plasma and vacuum...

...WB abrasive fleece based on corundum (alumina), zircon (ZK), silicon carbide (SIC), ceramics (KK) for the processing of wood and lacquer surfaces, plastics, metals. Delivery options: fleece belts, sleeves, rolls, discs, hook-and-loop discs, coarse cleaning discs, flap discs, flap discs combined with abrasives, discs with finishing connections – rotary connection or push-button connection, compact discs, fine grinding discs, satinizing belts, rollers.

...Ceramic vacuum feedthrough for controlling, measuring, regulating, and coupling energy. All flanges made of stainless steel. Other conductor lengths, threads, or waveguides available upon request. Delivery time: 2 weeks from receipt of payment. Shipping costs: DHL terms, free shipping for orders over 250.-. Item number: 458.3005.11C Pin Material: NiFe42 (1.3917) Ø Pin D: 1.5 mm Current: 6 A Voltage: 4 kV Flange width: 16 Single feedthrough: 457.3001.06A Ø B: 34.0 mm Pin length A: 52.6 mm Length E: 10.8 mm Length F: 11.5 mm...

...extrusion compression isostatic pressing injection ceramic coating Plasma Alumina Oxide Zirconia Ceramic Magnesium Oxide Alumina Silicate Cordierite Steatite Technical Porcelain C780 to C799 C830 MGPSZ YTZP C820 MgO C610 C620 C410 C520 C220 C221 C110 C111...

...A non-iron, extremely hard and sharp-edged mineral. Due to its highly abrasive properties, it is excellently suited as a blasting medium in the stainless steel and aluminum industries. Application areas: - Reusable blasting media - Grinding, lapping, and polishing agents - Ceramic grinding wheels and media - Wear protection and refractory products Grain sizes: FEPA grain sizes: F8 - F220 Additional grain sizes can be produced upon request. Packaging: Big Bag (1 ton); 25 kg bags totaling 1 ton on Euro pallet.

...-containing) alumina. Free Al 2 O 3 occurs naturally as a mineral. corundum and its forms of precious stones, sapphire and ruby; they can be synthesized from alumina and are actually sometimes called alumina, but this term is more precisely limited to the material used in aluminum metallurgy, industrial ceramics and chemical processing.

...We offer ceramic bodies for various applications, including heat exchange, as well as for catalytic processes and biological carriers. Applications: Catalyst carriers Honeycomb bodies made of catalytically active material Heat exchange honeycombs Flow straighteners Biological carriers Materials: Highly porous cordierite Hard porcelain Acid-resistant alumina porcelain Porous mullite Porous cordierite Dense cordierite...

...LTCC (Low Temperature Co-fired Ceramic) is a multilayer capable substrate technology offering excellent RF and microwave performance characteristics. Thanks to its low sintering temperature (around 900°C) allows it to co-fire with highly conductive metals such as silver and gold. It is sometimes referred to as “glass ceramics” because glass is mixed in its main raw material, alumina. Elite...

...Products used in the ceramic, rubber, paint, cork industries, among others...

...Andalusite is primarily a raw material made of alumina-silicate used in the manufacturing of heat-resistant refractory products. Unlike many other refractory raw materials, andalusite does not require costly calcination during production. Andalusite-based refractories are mainly used in the production of iron and steel, often in blast furnaces, furnace brick machines, torpedo transfers, hot metal...

... provide high-quality accessories like supporting discs in various grades to adjust the stock removal rate. Special designs ensure constant air circulation, preventing heat buildup. Fibre discs are clamped onto angle grinders, with Quick-Change versions for mini grinders for hard-to-reach areas. CERABOND technology combines ceramic grain with our unique bond system for lasting aggressiveness and durability, ideal for surface grinding, weld seam removal, rust removal, and deburring. CERABOND X and zirconia alumina discs are available in packs of 50, with a spindle system to prevent bending.

...Available with 250-1000W; 110-480V; custom leads, colors and thermocouple (K) - Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying...

...GC Initial AL, GC Initial Zr-FS - All-Ceramic System with Multiple Indications The GC Initial ceramic system opens up new horizons and numerous possibilities in the field of all-ceramic solutions. Whether working with traditional alumina oxide or embracing the new trend of zirconium use, GC Initial offers optimal, reliable, and highly productive solutions in every case. GC Initial sets new...

...Alumina is the most commonly used ceramic material. Thanks to its excellent electrical insulation, dielectric strength, and high temperature resistance up to 1750°C. THE ADVANTAGES OF ALUMINA CERAMICS - High strength - High hardness - Good temperature resistance - High wear resistance - High corrosion resistance even at elevated temperatures - High biocompatibility - Excellent tribological properties...

...Microcertec manufacture ceramic reflectors for lasers and IPL systems. We offer customized reflectors that are primarily manufactured from high-reflectivity alumina and subsequently glazed over in order to guarantee leak-tightness and protection. The base material - reflective alumina - was developed specificaly for this application. It offers a high reflectivity from visible to near infra-red...

IKEUCHI EUROPE B.V. is the European trading subsidiary of H. IKEUCHI & Co. IKEUCHI is a Japanese manufacturer of industrial spray nozzles and humidification systems, and we are the market leader in Asia. We are the largest manufacturer of ceramic spray nozzles. As "The Fog Engineers," we provide mist-producing and spraying products, as well as support and system designs. We always strive to delive...

...The cost-effective "Allrounder" Alumina holds a leading position in technical ceramics, ranking first in both its prevalence and depth of application. The reasons for this are its excellent all-round material properties, ease of processing, global availability, and competitive pricing. Special properties: - Very high operating temperature - Very good electrical insulation - Very high...

...“GIR-INTERNATIONAL” LLC is the trade company and official representative of the CLOSED NON-DIVERSIFIED VENTURE CORPORATE INVESTMENT FUND «GENERAL INVESTMENT RESOURCES” - the owner of 4 refractory plants in Ukraine. Each of them specializes in the manufacturing of a specific refractories group. Chamotte (Alumina), High Alumina, Magnesia, Silica (Dinas), Fused quartz and other types of refractories...

... Sensor Model:DJM1615-97 Name:Electrodes for Boiler Drum Level Measurement Material:high quality alumina ceramics material Install method:Screw in Bear Temperature:300-6000c Insulating Resistance:2500QM Working Pressure:21-31 Mpa Working Time:8000-10000 hours Spare Parts:Porcelain terminal and copper washer Place Of Origin:Made In China...

For over 35 years, VOGT GmbH has been developing and manufacturing technical ceramic components. Our extensive experience has proven beneficial for our customers. With our expertise, we engage early in the design phase of a new product. Therefore, we are not just suppliers but also competent partners in the development of functional solutions. Our focus is on engineering ceramics for high-tech...

... crucibles for labware purposes. Our extensive range of industrial ceramic materials include, zirconia, alumina, mullite, corundum, steatite, quartz and a range of high performance silicon carbide products made in nitride bonded, clay bonded, reaction bonded and recrystallised forms. Anderman Ceramics also provides a range of high quality machined technical ceramics and complex industrial refractory shaped products in a range of advanced ceramic materials to suit the application. Anderman Ceramics also offers a range of ceramic adhesive cements, high performance ceramic coatings.

IPS Ceramics is known right across the world, we are renowned for offering one of the widest ranges of cordierite refractories (Batts, Setters, Tubes), manufactured in the modern IPS-Trend factory. Additionally, IPS Ceramics now offers high temperature specialists superb, advanced performance ceramic components manufactured in Silicon Carbide and Alumina. Recently we have added Steatite, Quartz and Zirconia to our technical ceramic material range.