ventilation components

...Round ventilation duct made of expanded polypropylene (EPP). The most important features of the product are rigid construction, low weight, easy assembly (integrated malefemale coupling) and good thermal insulation. EPP ducts, used, for example, as sections of the supply and exhaust ventilation systems with heat recovery, do not require additional insulation. The system eliminates the formation of thermal bridges. Lenght EPP ducts 1 m sections Diameters 125, 160 and 200 mm. Wall thickness 15 mm Thermal conductivity 0.039 W / m*K Airtightness class ATC2 (old D) @ 90Pa acc. to PNEN 17192201901 ...

...We develop and manufacture blower components such as fans, motors, duct guides, electronics and housings and, if desired, integrate them into assemblies and devices. In addition, we develop entire blowers as well as the required equipment. Furthermore, we are your contact for fan optimisation with regard to improved volume flow, more efficient volume pressure and noise reduction.

...Lip seal made of SRB, soundproof, color black, application area: drainage systems, for buildings and properties. Ventilation ducts Dimensions / Length: Dimension 32 / 40 / 50 / 75 / 90 / 110 / 125 / 160 up to length: 150 / 250 / 500 / 1000 / 1500 / 2000 / 2650 (from DN 70) mm...

...Roof penetrations and roof bases are required for the secure attachment of roof hoods for HVAC systems to the building structure. They are designed for installation on flat roofs as well as on sloped roofs with an inclination of up to 45°. When designing and shaping the components, the snow load zones (heights) and wind loads of the respective application area must be taken into account. Materials: Galvanized steel sheet, stainless steel sheets, aluminum Also available in insulated versions.

...Optimal ventilation is primarily achieved through counter-battens between the eaves and ridge areas. The space created beneath the roofing material serves several purposes: - Moisture that has penetrated through the roofing can be safely drained, - the safe drainage of dripping condensation from the underside of the roofing material, - ventilation of the covering, - the ventilation space achieved can contribute to summer heat protection.

IFEC is a Portuguese manufacturer with a robust industrial capacity, producing millions of accessories and components each year. The company specializes in high-quality solutions for drainage systems, including galvanized or stainless-steel covers, grates, and channels, as well as hydraulic conduits, formwork for civil construction, and fastening systems for gutters, air conditioning units, roofs,...

...At Vital Parts we now stock a large range of advanced Vent Plug solutions, including Liquid Tight, Snap In and Threaded versions. Designed to provide ventilation towards internal components, these are a highly sought after product for use within hydraulic and pneumatic applications to prevent overheating or the entry of harmful cotaminants. Please check out our website to view all available sizes, styles and solutions we offer for these Vent Plugs, including Plastic Vent Plugs For Panel Holes and Nylon Ventilation Plugs. Styles Available::Liquid Tight Threaded:Snap In Standard:Filtered...

...Mounting rail systems are fundamental and essential elements for hanging the rectangular components of ventilation ducts and air conditioning systems. The manufactured profiles allow for the installation of ventilation ducts with various dimensions, and the universal perforation enables a suitable selection of profiles as well as quick assembly of the structure. The wide range of perforated and smooth profiles is used for the production of various types of support arms and brackets.

Vosse produces: - parts and components made of steel; - steel structures; - lightweight metal structures; - finished products based on steel solutions. For the industry: - technological structures - technical structures - supporting and accompanying structures - complete production lines - industrial facilities - tanks for various purposes - fans - heat exchangers - container sockets For constru...

... telecommunication cables. Insulation, waterproof and protection of electric components. Thickness: 0.3mm-1mm Weatherproof covering for thermal insulation of pipework and ventilation trunking. Premium self-amalgamating tape is also available. It is ideal for jointing and fixing of cables up to 69KV.

...Plastic and TPU car holder to hold your phone while driving, 360° rotatable and universal. Clip the bracket to the ventilation and place your mobile phone (up to 7 inches) on it. Function: In-car phone holder Material: PC+TPU Tensile resistance: 5.5--8.3cm Size: 66*31*68.5 mm...

...We manufacture for maritime needs: guardrails, tubes, handrails, fittings, stairs, floors, cable tensioners, turnbuckles, skirting boards, ventilation, floor jacks, clamps, rod holders, anchors, large-sized parts, angles, T-pieces, protections, cable lugs and screw terminals, crimp sockets, and much more...

...For our standard program of ventilation components made from thermoplastic materials, primarily for the extraction of chemical vapors, we mainly use polypropylene (PP), flame-retardant polypropylene (PPs), polyethylene (PE), or polyvinyl chloride (PVC). A design adapted to operational conditions, the selection of the appropriate material, the tailored design of the shape and accessories to...

...Start-up valve with ventilation of the Comfort series Sizes: 1/4" to 1" Flow rate at 6 bar with ∆p 1 bar: 1850 to 5200 Nl / min Pressure range up to 15 bar...

...non-ferrous metals, and plastics • Non-corrosive • Acetone-free • Free from chlorinated hydrocarbons, CFCs, and aromatics Areas of Application: For easy degreasing and cleaning of all surfaces made of metal, composite materials, and plastics. Usable in both industrial and craft settings. Application: Spray the parts to be cleaned and rinse off dirt. Ensure adequate ventilation. Packaging: Canister Content: 10 liters...

...powerful and economical device Multiple operating and storage positions, stackable, transport handle Motor equipped with high-quality ball bearings - No unilateral stress on the motor shaft With integrated socket for connecting other devices Technical specifications: Max air flow: 2300 m³/h Speed 1: 1400 m³/h Speed 2: 2100 m³/h Speed 3: max. 2300 m³/h Max pressure: 400 Pa Installation: for building Configuration: centrifugal Function: ventilation...

...Aldea automatic air vent is used to automatically evacuate air that may occur in heating and ventilation systems. In this way, noise that may occur in your heating system, damage that may occur in the circulation pump, corrosion of other components in the system and regional thermal imbalance that may occur at the installation end points are prevented. Model Name:P102 Connection Diameter:1/2"...

... problem with the crankcase ventilation system or worn piston rings. It can also monitor for low crankcase pressure, which could indicate leaking or faulty components. It produces the energy required for its operation by utilizing the difference between the temperature of the liquid in which the device is located and the temperature of the environment. CraP-es incorporate pressure sensors in a stainless steel probe for direct liquid contact. These sensors offer improved reliability and accuracy for simultaneous operation. ...

... be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We manufacture types with all metal components in stainless steel for nautical application, corrosive environments and Urea solutions (AUS 32 (AdBlue®)). The steel version can be supplied also in black color. PASSAGE DIAMETER:30 mm Passage...

...Grilles, diffusers and plenums are designed for extraction and supply of dirty polluted air from a room or space and conditioned air from ducting. The components can be connected to heating, ventilation and air conditioning systems easily and all meet regulatory body standards. All components are available in different sizes as well as varying finishes in order to be non intrusive and fit to the stylistic features of the building. Grilles, diffusers and plenums can be used in both commercial and industrial buildings.

... COMPONENTS radial fans makes it possible to achieve large volumetric flows even with unilateral bearings (i.e. single-flow systems). Bearings can be provided on both sides if requested by the customer, and this configuration is implemented as standard above a critical impeller mass. With their flow-optimized suction pockets, double-flow radial fans make it possible to create efficient designs for...

...Compact design and reduced dimensions: a range of evaporative cooling towers with centrifugal fans for special space configurations. MCT-EC version available with electronically controlled fans. Indoor application:Centrifugal fan can better suit different layouts. Reduced dimensions:Ideal for confined spaces or indoor. Corrosion free:Extensive use of fiberglass components.

...Dust extraction systems for machinery and industrial plants are designed to remove and filter dust, fumes, gases, and other particles present in the air within industrial environments. These systems are essential for ensuring the safety and health of operators, improving air quality, and preserving the efficiency of machinery. Operation and Main Components A dust extraction system consists of...

... lighting, very low installation heights, long service life, and options for color design. The support profiles are made from extruded aluminum. The individual ceiling elements are either made from powder-coated or anodized aluminum or stainless steel. The components are non-combustible, A1 according to DIN 4102.

... without any duct installation. Simply set it up. Connect electricity and compressed air. Done. Thanks to the layer ventilation system recommended by the professional association, which operates on a recirculation principle, the PowerJet SimpleAir saves up to 70 percent in heating costs per year. The PowerJet SimpleAir is available in various sizes, operates quietly, and is easy to use. If your production conditions change - no problem. The filter tower can be quickly and easily relocated.

...Quality Components and Functional Units ATEASY® and ATFLEX® are equipped with components and functional units from AL-KO certified manufacturers, whose products are precisely tested by AL-KO upon each delivery. Unlike other providers, AL-KO offers its own products in many areas and equips the ATEASY® and ATFLEX® systems with components and functional units from various manufacturers and performance classes. This way, you receive a climate and ventilation device that perfectly meets your requirements. (Image shows AL-KO POOL AIR configuration)...

... quantities. • Containers • Basins • Housings • Oven components • Cyclones • Pipe unwindings • Perforated sheets • Frame constructions • Welded constructions • Laser cuts • Plasma cuts • Stamped parts • Bent parts • Machine casing parts • Hardox wear parts...

...For components in air and climate technology in residential and industrial buildings, as well as in large-scale plant construction, a multitude of regulations and laws apply. They must be cleanable, equipped with filter units and access openings, produce minimal airflow noise, and be partially resistant to aggressive media. Furthermore, they are subject to fire protection regulations. With our...

... stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The air heater essentially consist of the following main-components: Process flange Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box...

...Our paint booths dedicated to wood treatment are customizable according to your process to specifically meet your needs. MECATELIER is capable of providing comprehensive support, from establishing the offer to its clients, executing the offer, and after-sales service. Operating mode and components: Our paint booths operate under slight overpressure balanced by a programmable controller; by default, the ventilation is horizontal (from the top to the back of the booth), but it is also possible to have vertical ventilation (from top to bottom) or a combination of both.