Heat recovery ventilation unit - HRU-PremAIR-500
Heat recovery ventilation unit - HRU-PremAIR-500Heat recovery ventilation unit - HRU-PremAIR-500Heat recovery ventilation unit - HRU-PremAIR-500Heat recovery ventilation unit - HRU-PremAIR-500Heat recovery ventilation unit - HRU-PremAIR-500

Heat recovery ventilation unit - HRU-PremAIR-500

Heat recovery ventilation unit HRUPremAIR is a modern device with 350 / 450 or 500 m3/h air flow @ 100 Pa. Unit is made from cutting edge materials aluminim heat exchanger and EPP selfsupporting casing. Depending on the model, following heat exchangers are used counterflow aluminium heat exchanger (HRV) or counterflow enthalpy exchanger (ERV). Enthalpy exchangers in HRUPremAIRE series have a polymer membrane that effectively recovers heat and moisture from the extract air. Such membrane works like a membrane in waterproof trekking clothing i.e. it allows water vapour to pass through, but not liquid water and air. The enthalpy exchanger also blocks the transfer of odours, bacteria and spores. The exchanger material, is needless to say, primarily optimized for maximum heat recovery efficiency. PremAIR air handling units optionally can be equipped with the Constant Flow system, whose task is to maintain a constant air flow in the installation.
Similar products
1/15
Heat Recovery Unit -  350 m3/h - Heat Recovery Units with  350 m3/h -  HRU- PremAIR-350
Heat Recovery Unit - 350 m3/h - Heat Recovery Units with 350 m3/h - HRU- PremAIR-350
The heat recovery ventilation unit HRU-PremAIR has an air flow capacity of 350 m3/h at 100 PA. Designed to use aluminum heat exchangers and EPP self-s...
PL-05-552 Wola Mrokowska
Ceiling mounted heat recovery unit - HRU-SlimAIR-250
Ceiling mounted heat recovery unit - HRU-SlimAIR-250
The HRUSlimAIR heat recovery unit is designed for residential buildings. The HRU has a capacity of 250 m3/h @ 100 Pa, generated by energyefficient EC ...
PL-05-552 Wola Mrokowska
EPP ventilation pipe 15mm thick - EPP-15-SRGL
EPP ventilation pipe 15mm thick - EPP-15-SRGL
Round ventilation duct made of expanded polypropylene (EPP). The most important features of the product are rigid construction, low weight, easy assem...
PL-05-552 Wola Mrokowska
Duct humidifier - HomeEvap
Duct humidifier - HomeEvap
The HomEvap adiabatic humidifier is designed for domestic mechanical ventilation systems with a maximum airflow 600 m3/h. Filtered water (Legiosafe®) ...
PL-05-552 Wola Mrokowska
Single Room Heat Recovery Units  - HRU-WALL-RC
Single Room Heat Recovery Units - HRU-WALL-RC
HRUWALLRC is a bidirectional ventilation unit, often described as decentralized or pushpull, with regenerative ceramic heat exchanger. It is intended ...
PL-05-552 Wola Mrokowska
Single Room Heat Recovery Units  - HRU-WALL
Single Room Heat Recovery Units - HRU-WALL
HRUWALL is a singleroom decentralized heat recovery unit for concealed installation. The unit comes with a ceramic heat exchanger which boasts a maxim...
PL-05-552 Wola Mrokowska
Dust extraction ducting - SRGLQT
Dust extraction ducting - SRGLQT
longitudinal welding with overlap pipe for transporting air and dust. TRANSQuick system is made of galvanised steel sheet, 0.7 and 0.9 mm in thickness...
PL-05-552 Wola Mrokowska
Access door for round ducts
 - IPR
Access door for round ducts - IPR
The IPR access door features a CR EPDM gasket and it is designed for installation on round duct walls. The design of the IPR access door and its gaske...
PL-05-552 Wola Mrokowska
Single room heat recovery unit with Wi-Fi - HRU-WALL-WI
Single room heat recovery unit with Wi-Fi - HRU-WALL-WI
HRUWALLWI model ductless heat recovery unit comes equipped with a WiFi module. Its basic parameters, including max. heat recovery 82%, airflow rate 60...
PL-05-552 Wola Mrokowska
EPP ventilation pipe 43 mm thick - EPP-43-SRGL
EPP ventilation pipe 43 mm thick - EPP-43-SRGL
Round ventilation duct made of expanded polypropylene (EPP). The most important features of the product are rigid construction, low weight, easy assem...
PL-05-552 Wola Mrokowska
Semi-rigid ducting - FLX-HDPE/FLX-HDPE-A
Semi-rigid ducting - FLX-HDPE/FLX-HDPE-A
FLXHDPE and FLXHDPEA plastic ducts are used to air distribution in domestic ventilation systems. Relatively small diameters allow to hide the installa...
PL-05-552 Wola Mrokowska
Smoke extract duct - SPR-Z-SMO
Smoke extract duct - SPR-Z-SMO
SPRZSMO SMOKE system spiral circular duct, fire resistance classE600 120 (ho) S1500 single, designed for singlecompartment smoke extraction systems an...
PL-05-552 Wola Mrokowska
Stainless steel ducting - SPR-K
Stainless steel ducting - SPR-K
Round spiral ducts are available in diameters from 80 mm to 1600 mm. The ducts are available as made of 0.4 mm to 1.8 mm thick metal sheet; the ducts ...
PL-05-552 Wola Mrokowska
Pre-insulated round ducts
 - SPRI
Pre-insulated round ducts - SPRI
The standard duct length is 3000 mm; the sheet thickness for a given diameter is the same as that for the SPR spiral coiled ducts. The ducts of diamet...
PL-05-552 Wola Mrokowska
Galvanised steel ducting - Galvanised steel ducts SPR-C
Galvanised steel ducting - Galvanised steel ducts SPR-C
Round spiral ducts are available in diameters from 80 mm to 1600 mm. The ducts are available as made of 0.4 mm to 1.8 mm thick metal sheet; the duct...
PL-05-552 Wola Mrokowska

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play