Round ventilation duct made of expanded polypropylene
(EPP). The most important features of the product are
rigid construction, low weight, easy assembly (integrated
malefemale coupling) and good thermal insulation. EPP
ducts, used, for example, as sections of the supply and
exhaust ventilation systems with heat recovery, do not require
additional insulation. The system eliminates the formation of
thermal bridges.
Lenght EPP ducts 1 m sections
Diameters 125, 160 and 200 mm.
Wall thickness 15 mm
Thermal conductivity 0.039 W / m*K
Airtightness class ATC2 (old D) @ 90Pa
acc. to PNEN 17192201901
The RAVAV regulator is dedicated for forced ventilation systems
and is an important component for installations with variable
air flow.
The regulator ...
Ventilation bends 45˚ made from expanded polypropylene
(EPP). Bends are produced in diameters 125, 160 and 200 mm.
The standard wall thickness is 43mm...
The LDS linear slot diffuser are intended for ceiling or wall
installation. The product can supply warm or cold air. The
diffuser can feature from 1 t...
A femalemale coupling made of expanded polypropylene
(EPP) is used to connect the EPP15 ducts, when the male part
is cut off (e.g. when duct is shorte...
SPRZSMO SMOKE system spiral circular duct, fire resistance
classE600 120 (ho) S1500 single, designed for singlecompartment smoke extraction systems an...
The heat recovery ventilation unit HRU-PremAIR has an air flow capacity of 350 m3/h at 100 PA. Designed to use aluminum heat exchangers and EPP self-s...
FLXPLO / FLXPRO plenum boxes are components of the FLXREKU system intended for domestic mechanical ventilation
systems, also known as mechanical venti...
Electrostatic precipitator eMOCarz was design for residential
buildings. Compact size and exceptionally low pressure drop
makes it suitable for reside...
The insulated manifold box is used for mechanical ventilation systems with heat recovery (MVHR). MVHR manifolds do not need to be insulated onsite tha...
The HRUSlimAIR heat recovery unit is designed for
residential buildings. The HRU has a capacity of 250 m3/h
@ 100 Pa, generated by energyefficient EC ...
Heat recovery ventilation unit HRUPremAIR is a modern
device with 350 / 450 or 500 m3/h air flow @ 100 Pa. Unit
is made from cutting edge materials a...
The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire...
Round spiral ducts are available in diameters from 80 mm to
1600 mm. The ducts are available as made of 0.4 mm to 1.8
mm thick metal sheet; the duct...
HRUWALL is a singleroom decentralized heat recovery unit
for concealed installation. The unit comes with a ceramic
heat exchanger which boasts a maxim...
Plug ends are pressed with a male end on the duct
side to blind it at air tightness class D. The plug end
rim is long enough to easily secure it with ...
The RAVAV regulator is dedicated for forced ventilation systems
and is an important component for installations with variable
air flow.
The regulator ...
Ventilation bends 45˚ made from expanded polypropylene
(EPP). Bends are produced in diameters 125, 160 and 200 mm.
The standard wall thickness is 43mm...
The LDS linear slot diffuser are intended for ceiling or wall
installation. The product can supply warm or cold air. The
diffuser can feature from 1 t...
A femalemale coupling made of expanded polypropylene
(EPP) is used to connect the EPP15 ducts, when the male part
is cut off (e.g. when duct is shorte...
SPRZSMO SMOKE system spiral circular duct, fire resistance
classE600 120 (ho) S1500 single, designed for singlecompartment smoke extraction systems an...
The heat recovery ventilation unit HRU-PremAIR has an air flow capacity of 350 m3/h at 100 PA. Designed to use aluminum heat exchangers and EPP self-s...
FLXPLO / FLXPRO plenum boxes are components of the FLXREKU system intended for domestic mechanical ventilation
systems, also known as mechanical venti...
Electrostatic precipitator eMOCarz was design for residential
buildings. Compact size and exceptionally low pressure drop
makes it suitable for reside...
The insulated manifold box is used for mechanical ventilation systems with heat recovery (MVHR). MVHR manifolds do not need to be insulated onsite tha...
The HRUSlimAIR heat recovery unit is designed for
residential buildings. The HRU has a capacity of 250 m3/h
@ 100 Pa, generated by energyefficient EC ...
Heat recovery ventilation unit HRUPremAIR is a modern
device with 350 / 450 or 500 m3/h air flow @ 100 Pa. Unit
is made from cutting edge materials a...
The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire...
Round spiral ducts are available in diameters from 80 mm to
1600 mm. The ducts are available as made of 0.4 mm to 1.8
mm thick metal sheet; the duct...
HRUWALL is a singleroom decentralized heat recovery unit
for concealed installation. The unit comes with a ceramic
heat exchanger which boasts a maxim...
Plug ends are pressed with a male end on the duct
side to blind it at air tightness class D. The plug end
rim is long enough to easily secure it with ...