The FLXPLOEPPF plenum boxes are part of the FLXREKU
air distribution system designed for domestic mechanical
ventilation systems, socalled the MVHR system, to which an
air valve and FLXHDPE / FLXHDPEA ducts with a diameter
of Ø75 are mounted.
Due to their small size, they do not require much space or
special installation. This allows achieving a larger usable floor
area of the room.
The FLXPLOEPPF plenum boxes are made of expanded
polypropylene, i.e. EPP, while Ø75 spigots are made of ABS.
The material used allows obtaining an aerodynamic shape of
the inside of the box which leads to low air resistance.
The DAOS dampers feature a split flap closure and allow the
air flow to pass in one direction only. The aluminium closure
flaps are pressed against a ...
HRUWALLWI model ductless heat recovery unit comes
equipped with a WiFi module. Its basic parameters, including
max. heat recovery 82%, airflow rate 60...
Ventilation bends 45˚ made from expanded polypropylene
(EPP). Bends are produced in diameters 125, 160 and 200 mm.
The standard wall thickness is 43mm...
SPRZSMO SMOKE system spiral circular duct, fire resistance
classE600 120 (ho) S1500 single, designed for singlecompartment smoke extraction systems an...
The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire...
Plug ends are pressed with a male end on the duct
side to blind it at air tightness class D. The plug end
rim is long enough to easily secure it with ...
Round spiral ducts are available in diameters from 80 mm to
1600 mm. The ducts are available as made of 0.4 mm to 1.8
mm thick metal sheet; the duct...
The insulated manifold box is used for mechanical ventilation systems with heat recovery (MVHR). MVHR manifolds do not need to be insulated onsite tha...
Electrostatic precipitator eMOCarz was design for residential
buildings. Compact size and exceptionally low pressure drop
makes it suitable for reside...
FLXPLO / FLXPRO plenum boxes are components of the FLXREKU system intended for domestic mechanical ventilation
systems, also known as mechanical venti...
The RAVAV regulator is dedicated for forced ventilation systems
and is an important component for installations with variable
air flow.
The regulator ...
The heat recovery ventilation unit HRU-PremAIR has an air flow capacity of 350 m3/h at 100 PA. Designed to use aluminum heat exchangers and EPP self-s...
The LDS linear slot diffuser are intended for ceiling or wall
installation. The product can supply warm or cold air. The
diffuser can feature from 1 t...
A femalemale coupling made of expanded polypropylene
(EPP) is used to connect the EPP15 ducts, when the male part
is cut off (e.g. when duct is shorte...
HRUWALL is a singleroom decentralized heat recovery unit
for concealed installation. The unit comes with a ceramic
heat exchanger which boasts a maxim...
The DAOS dampers feature a split flap closure and allow the
air flow to pass in one direction only. The aluminium closure
flaps are pressed against a ...
HRUWALLWI model ductless heat recovery unit comes
equipped with a WiFi module. Its basic parameters, including
max. heat recovery 82%, airflow rate 60...
Ventilation bends 45˚ made from expanded polypropylene
(EPP). Bends are produced in diameters 125, 160 and 200 mm.
The standard wall thickness is 43mm...
SPRZSMO SMOKE system spiral circular duct, fire resistance
classE600 120 (ho) S1500 single, designed for singlecompartment smoke extraction systems an...
The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire...
Plug ends are pressed with a male end on the duct
side to blind it at air tightness class D. The plug end
rim is long enough to easily secure it with ...
Round spiral ducts are available in diameters from 80 mm to
1600 mm. The ducts are available as made of 0.4 mm to 1.8
mm thick metal sheet; the duct...
The insulated manifold box is used for mechanical ventilation systems with heat recovery (MVHR). MVHR manifolds do not need to be insulated onsite tha...
Electrostatic precipitator eMOCarz was design for residential
buildings. Compact size and exceptionally low pressure drop
makes it suitable for reside...
FLXPLO / FLXPRO plenum boxes are components of the FLXREKU system intended for domestic mechanical ventilation
systems, also known as mechanical venti...
The RAVAV regulator is dedicated for forced ventilation systems
and is an important component for installations with variable
air flow.
The regulator ...
The heat recovery ventilation unit HRU-PremAIR has an air flow capacity of 350 m3/h at 100 PA. Designed to use aluminum heat exchangers and EPP self-s...
The LDS linear slot diffuser are intended for ceiling or wall
installation. The product can supply warm or cold air. The
diffuser can feature from 1 t...
A femalemale coupling made of expanded polypropylene
(EPP) is used to connect the EPP15 ducts, when the male part
is cut off (e.g. when duct is shorte...
HRUWALL is a singleroom decentralized heat recovery unit
for concealed installation. The unit comes with a ceramic
heat exchanger which boasts a maxim...