transmission test

...The CJC® flushing systems have been specifically designed for the quick and efficient flushing of industrial gear units (new or refurbished) as well as for use on test benches. Thanks to the integrated fine filters, the purity of the flushing oil is maintained at a consistently high level throughout the entire flushing process, which minimizes flushing time. A fully automated data collection...

... Various options such as shift force measurement, pull/push/button actuators for unlocking gear positions, clutch actuators, and various integration interfaces are available. The shift robot directly operates the standard gear lever of the transmission in a spherical motion sequence. Setup is quick and easy using a teach-in procedure with a handheld terminal.

... the development of passenger car, commercial, truck or even military vehicle components. The software is easy to use and also highly customizable, allowing different product lines to be tested within a single system. With regenerative braking, power is recovered and returned to the test system, ensuring efficient operation. Considering that tests can last about 1 month, costs can be an important parameter to control costs. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process.

... - Spot-welded wire mesh with zinc-aluminum coating (95% zinc / 5% aluminum) - Standard wire thickness Ø 4.5 or 5.0 mm - Available in mesh sizes 5x10cm and 10x10cm Tensile strength of all items at least 450 N/mm2 - 3,000 hours salt spray test according to DIN EN ISO 9227-NSS - Material-saving assembly possible - Optimized production and storage Spiral: Wire-Ø 4.5 mm Spacer: Wire-Ø 5.0 mm...

...Torque-Rigid High-Speed Coupling for Test Stands FlexDur FD-HS • Rigid and backlash-free torque transmission • Can be directly adapted to HBM torque transducers • Suitable for very high rotational speeds • Compensates for axial, radial, and angular shaft misalignment • Low restoring forces with shaft misalignment • Low mass inertia due to high power density • Suitable for use in ambient...

...Customized Solution Hand-held device with integrated torque transducer. Direct channel selection of filed test programs. Drive of the transmission is achieved to the predetermined moment of friction during the assembly. Subsequent break-in period and subsequent Reibwertprüfung with threshold monitoring, visual evaluation and documentation. Direct channel selection of filed test programs Safety circuit by two-hand operation Constant load independent test speed either vertically or horizontally about Balancer...

... plasma to aid in the diagnosis of Monkeypox Virus infection. Monkeypox is a zoonotic orthopoxvirus that incidentally causes disease in humans similar to smallpox, although with notably lower mortality. This virus is clinically relevant because it is endemic to western and central Africa, with outbreaks in the Western Hemisphere related to the exotic pet trade and international travel. Transmission can occur through contact with bodily fluids, skin lesions, or respiratory droplets of infected animals directly or indirectly via contaminated fomites. Product code:SC-2368-25...

... (Radio Frequency) transmission Molded strain relief enhances durability Small diameter cable provides greater flexibility Nickel plated body enhances corrosion resistance Available from stock in 12 lengths ranging from 1 to 25 feet Applications: Data Transmission RFID GPS Test and Measurement Wireless Infrastructure SKU:CC174-25 Manufacturer:L-com RoHS Status:RoHS Compliant UPC:822335004221...

...pulsating and dynamic loads. Speed and torque as testing parameters are controlled independently. The torsion test rig with mechanical torsion application allows the energy-efficient testing of components at relatively low investment costs. Using a hydrostatic torsion motor in the test rig creates realistic and consistent testing conditions leading to test results very close to real-life conditions.

...3D sensors from Micro-Epsilon are equipped with an easy-to-integrate SDK (Software Development Kit). The SDK is based on the GigE Vision and GenICam industry standards including the following function blocks: Network configuration and sensor connection Extensive sensor control Transmission control of measurement images Management of user-defined parameter sets C++ sample programs and documentation Access to the sensor via GigE Vision is also possible without SDK using a GenICam client.

...The HD series hysteresis dynamometers are universally applicable and are particularly suited for medium power test bench applications (up to 14 kW in intermittent operation). A hysteresis dynamometer develops torque even when stationary. This allows for the measurement of a motor's characteristics, from no-load operation to rotor lock-up. Depending on the model, the brake cooling is achieved...

... available Light transmission (400 - 800 nm): > 93% Thermal resistance: -30 °C to 110 °C UV absorption: ~ 15% Surface hardness: 3H to 4H Self-adhesive and removable without residue: YES Easy application without tools: YES Very high adhesion on glass, many plastics, and bare metals: YES RoHS and REACH compliant: YES Provides a velvety, significantly improved writing feel on displays: YES...

... Connection: Round shaft ends, keyway Electrical Connection: 12-pin connector, USB Integrated Speed Measurement: Optional (TTL output signal with 400 or 1024 increments) Integrated Angle Measurement: Optional - TTL output signal with 400 or 1024 increments Integrated Angle Measurement: Optional - Angle resolution 0.225° or 0.09° with four flank evaluation Increments on Encoder Disc: No encoder disc, 240, 400, 1024, 2000 Protection Class: IP40 Operating Temperature Range: 0 ... +60 °C Max. Speed: Depending on measurement range 7,000 - 25,000 rpm Signal Transmission: Contactless...

... finding, optionally accessible remotely — Digital archiving of documents – all important facility documents are stored locally and can be accessed at any time — Simple integration of the facility – transmission of facility data to technical management via common protocols or visualization on PC/tablet (MEC Remote)...

... system of our play-free lamella coupling ROBA®-DS. The core elements of the ROBA®-drive-checker are the Multi-Gateway and the measuring sleeve. The Multi-Gateway ensures robust, reliable energy and data transmission – both as a receiver and transmitter. The sleeve between two misalignment-compensating ROBA®-DS lamella packages captures the torque using proven strain gauge technology.

... meticulously assembled and tested at one of the renowned power plants. The test results affirm LiTeM's superior efficiency, marking it as a revolutionary development specifically crafted to enhance the performance and safety of internal combustion engines. Rf Transmission Power:+8dBm Operating Temperature:0 to +105 °C Weight:330 grams Sampling Refresh Rate:500ms - 5s Measuring Ranges:0 to +200 °C Power Consumption:30 to 60 µW...

...depending on final line volume. The goal of the end of line process is to activate and read all TPMS sensors, then transfer the data to the vehicle’s ECU, or transfer the data to the tire fitting plant database system for review. Once configured, the system is protected from involuntary manipulation, thanks to the lockout key mode. OEM specific software Sensor state manipulation (ship, park, test, transmission, etc.) RS232 or RS485 data transfer Lockout key mode, to avoid manipulation Compatible with ASCII and Modbus communication protocols Fully PLC (product line) controlled...

... for accurate reproduction of test conditions. The Atlas SolarConstant luminaire offers high irradiance efficiency and superior spatial uniformity on the test area. Combined with special Metal Halide Global (MHG) lamps and optical filters, the SolarConstant creates a spectral distribution that closely matches natural sunlight. Its proven modular design makes this unit ideal for large custom-designed...

... varnish is intended for printing easily absorbable surfaces which are in indirect contact with food ˈ Confirmed effectiveness in an independent microbiological test, consistent with ISO 20743:2013 ˈ Antibacterial properties are activated by light and air ˈ Durability of up to 1 year...

... Material:Nitride hardened steel; Piston rod: Hard chrome plated steel; Rod end button: Hardened steel and cor Damping medium:Automatic Transmission Fluid (ATF) Application field:Finishing and processing centres, Conveyor systems, Portal systems, Test stations, Machines and plan...

... example, red (630 nm), green (520 nm), and blue (470 nm) for ZPM RGB. Our range includes more than 30 wavelengths; thus, the photometer can be optimally adapted to the application. Transmission data are steadily shown on the display. Measuring data can be read by a computer or PLC (optionally) manually or after being triggered. The device under test can be adjusted and fixed using the optional...

... reverse gears Labyrinth-sealed gears with a degree of efficiency of > 98% High temperature gears for ambient temperatures of up to 300°C Saw drive gears Test station gears with output speeds of up to 12000 min -1 Double gears with two transmission ratios Robotic gears Spur gears High precision gears And much more...

... Motor Voltage: 24V DC (stepper motor) Max Load: 5500 N Max Static Load: 10000N Max Overturning Moment: TK more than 5N.M Axial Rigidity: 2000N Standard Stroke: From 100mm to 1000mm Speed Range: 1.2mm/s Transmission Precision: less than 0.35mm Reset Precision: less than 0.2mm Transmission Efficiency: More than 60% (ball screw type) Corrosion Protection: Salt spray test more than 480 hours Protection Class: IP65 Mechanical Life: More than 20 years Sensor Type: Hall Sensor...

... requirement to test any type of vehicle without difficulty. By recreating conditions comparable to those on the road (synchronization of wheel rotation between front axle/rear axle), immediate advantages are gained: • NO need to activate complex vehicle SW functions, such as 'dyno mode' • Avoid risks of damage to the vehicle's transmission The axle connection system is also disengageable via a pneumatic control, allowing for work with disconnected and independent axles, thus ensuring maximum flexibility.

...Exchange programs for: manual transmissions, transfer cases, axle differential transmissions, 4WD transmissions Manual transmissions, transfer and all-wheel drive transmissions, differential transmissions Rear axles and differentials For cars, SUVs, light commercial vehicles, and forklifts OES exchange programs Assessment and diagnosis Disassembly Cleaning Assessment and diagnosis by transmission experts Repair and maintenance Overhaul and refurbishment Replacement of failed parts Renewal of synchronizer rings Assembly Test bench Functional test run Noise test Leak test...

...Test bench and development of new generations of automotive gearboxes.

... fluidity is required. Gearbox ATF III G has a very high viscosity index and offers resistance against corrosion and foam building. It also has good anti oxidation and anti-wear properties. Gearbox ATF III G has an extremely low pour point which allows easy gear shifting at cold starts. Seals are not affected by this ATF. The Dexron III G specification differs from DEXRON III F by adding two extra tests. An 'electronically controlled converter clutch (ECCC) test' and a 'sprag wear test', by which...

...The Dräger Alcotest® 6820 med is designed for diagnostic use, where a CE marking as a medical device is required, in accordance with the EU Directive 93/42/EEC for medical devices. The extended memory capacity of the Alcotest® 6820 can log up to 5000 test results. An optical interface allows for wireless data transmission to the Dräger Mobile Printer directly at the point of use. Additionally, data can be transferred to a PC via USB connection or the device can be configured.

...Medium load stainless steel slide, 100% stroke MATERIAL - Stainless steel (AFNOR Z 6 CN 18-09, Werk 1.4301, AISI 304). USAGE - 100% stroke. - Hard stop in closed position. - Note: the maximum loads indicated are calculated based on a dynamic test of 80,000 cycles. - Recommended screw: M4. - The slides are sold in pairs.

... between shaft and hub by itself. It is not in the force flow. It is installed by sliding the shrink disc onto the hollow shaft and the subsequent tightening of the hydraulik system. By using conical surfaces the inner diameter reduces and the radial pressure is built up. After clamping the SHS will be locked mechanically and the hydraulic pressure will be removed. Due to this simple approach the SHS is suitable for repetitive clamping operations as they occur on a test bench, for example. Advantages of the SHS: – application-specific design/customization – relatively low pressure – very...