pump liquid

...Peristaltic pump liquid filling machine is one type of liquid filler which adapts the positive displacement pump as a dosing system.The pumps use the principle of peristalsis as the basis for their design. It is mostly application for filling small dosing liquid, for it is high GMP standard,and only the inner bore of the tube touches the fluid, it eliminate the risk of the pump contaminating...

... IP55 protection Maximum suction height 4.5 meters Built-in bypass Maximum liquid temperature to pump 90°C Specifications and advantages Self-priming volumetric pump FLUID: Diesel, Oil TECHNOLOGY: Gear ATEX: No PUMP TYPE: Bare FLOW: max 0.5 m3/h OUTLET: 3/4" BODY: Cast iron MECHANISM: Steel...

...-automatic mode, making it suitable for both large-scale packaging lines and small quantity filling needs. Its peristaltic technology offers numerous advantages, including the preservation of product integrity, as the product never comes into direct contact with the pump, only with the tubes.

... & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .

...Drum emptying pump with rigid discharge elbow and PTFE tap. Thanks to the high chemical resistance of PTFE and FEP materials in contact with the medium, it is also possible to transfer caustic liquids that attack conventional materials like PP or PVC (except for elemental fluorine). Also suitable for transferring high-purity liquids. The tap prevents any leakage of toxic vapors and any dripping of liquid after the transfer. Immersion depth: 40 cm, 60 cm, or 95 cm Flow rate: 180 ml/press, 270 ml/press, or 400 ml/press...

...Gear pumps are used to pump any product, even slightly loaded (without solids). They have a non-pulsating flow, are reversible, and self-priming. The pumping principle involves a driven gear rotating with a toothed rotor. These two components are separated by a half-moon. As it rotates, cavities are created, and the pumped liquid is drawn in and then expelled. The pump is not very sensitive to...

...Stainless Steel, also available in non corrosive plastic housing, Inverter heat pumps are equipped with variable speed compressors, depending on the energy demand and the surroundings conditions, higher efficiencies at much lower sound pressures, 65% higher C.O.P as for common on and off heat pump, Modbus capable, touch control with integrated WLAN connection for control via mobile device, titan heat exchanger, R32 defrosting liquid Pool Sizes:from 25 - 95 m³ Heat Capacity:12,8 to 20,4 kW...

...ESSLRYKHT / ESSLRYSKHT / ESSLRYCuKHT Series Liquid Receivers, having suitable base for Horizontal mounting, is providing durability and easiness during installation. This connection base provides protection from the vibration and any other external factors, the ESSLRYKHT Liquid Receiver has structure and durability to usage for years. It is designed for heat pump systems thus provides bi-flow...

...Pre-assembled pump kit to pump high flammable media out of 200 l drums or IBCs. Comprising drum pump F 424, outer tube in stainless steel, hose, hand nozzle and compression gland. As drive either the commutator motor F 460 or compressed-air motor F 416 are available. Product attributes: - No seal in the liquid area - Ex protected - Free from wear - Relief openings provide the same fluid...

... attack the pump materials. Water supply for high-rise buildings, pumping stations, potable water pressurization Washing stations, heating water circulation, air conditioning water circulation, water treatment systems Ultrafiltration, reverse osmosis, distillation systems, municipal swimming pools Irrigation: spraying, drip Food industry Firefighting systems...

...Vacuum Stoppering system to minimize entrapped filling & drip-free. Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Valveless Rotary Piston pump for Hygiene Filling. Contact parts are FDA Approved material and autoclavable. Optional Laminar Air Flow Booth. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere. Optional 100% Weight In Process Control of filling weight system by tare in / tare out to obtain nett filling weight check.

... LIMITS Liquid temperature: -10℃～110℃ Maximum ambient temperature: +40℃ Maximum system pressure: 10 bar Protection level: IP44 Mains connection: 230V; 50Hz Insulation class: F Characteristic features: Flanged (PN6 and PN10 compatible) Installation: Motor shaft should be positioned in horizontal direction Model Name:Aldea GPA 40-15F Strength:640W Max. Flow:28 m³/h Max. Height:15m Ø Connection Diameter:DN 40 Pipe Range:250mm Energy Efficiency Index (EEI):≤0.23...

... can be selected. Depending on the requirements, the filling medium can be automatically suctioned, conveyed through a funnel, or supplied directly under pressure. The system is designed for one operator, and the filling station can be freely chosen with a rotary piston, hose pump, or even with a piston pump. A variant with our FM1 is also available. Contact us, and we will take care of it!

...Features: - Container shapes (e.g., triangle, square, rectangle, polygon) can be designed very flexibly. Upon request, the container shape can be adapted to obstacles (e.g., hall supports, machine beds)! Dead spaces in machines can be utilized. - The scraper construction can often be retrofitted into an existing container! - Multiple bulk material and liquid tasks can be connected to a collection...

...ELKALUB MBF 370 is a medium for temporary and long-term corrosion protection. It prevents stainless steel sheets from tarnishing under seawater influence. Due to its extreme high-pressure properties, it is very well suited for lubrication. By adding it to industrial gear oils, corrosion protection and load capacity are improved. ELKALUB MBF 370 can be removed using the H1-approved cleaner ELKALUB FLC 900 or by steam cleaning. ELKALUB MBF 370 can be applied using a brush, by dipping, or as a spray. ELKALUB MBF 370 is available as a spray (400ml), pump spray (300ml), or in bulk.

...Thanks to the use of ceramics as bearing and shaft material, a magnetic coupling, and case components made out of alloy C22 (DIN 2.4602), this pump will take up any challenge in the chemical industry applications. Advantages High resistance to corrosion oxidizing and reducing media, acids and bases Hermetically sealed magnetic coupling (NdFeB) Long service life wear-resistant tungsten carbide...

... safety - Reduced risk of injury: thanks to the height of the pumps, you no longer need to bend down or move containers to dispense liquid Output per stroke: 25/5: 160 ml - 200/55: 400 ml - 1000/220: 400 ml Nozzle width: 20 mm, fits on extension hose with a diameter of 25 mm Nozzle length: 160 mm Tube width: 41 mm Pump weight: 25/5: 400 g - 200/55: 700 g - 1000/220: 749 g Packaging: 10 pcs/carton...

...We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

... thermal protection. Three-phase power supply 230/400V 50Hz with user-provided protection. Impellers: AISI 304 stainless steel. Diffusers: Noryl®. Protection: IP44. Maximum operating pressure: 8 bar. Maximum liquid temperature: 50°C.

...The ASCO LH900 Liquid CO2 Filling Pump has been developed as an universal unit for filling high pressure CO2 cylinders by weight. Like all ASCO Equipment, the Cylinder Filling and Weighing System is thoroughly factory pretested before despatch. Thanks to the separate control unit, the pump can be placed in a different location. Easy operation Switch on your ASCO LH900 and the unit automatically...

...Str f 2006 liquid soap pump 24 mm - Liquid Pump - Dispenser Pump Closure Type:Push Pull Caps Closure / Neck Diameter:28 mm Closure Material:PP Market Category:Cleaning, Cosmetics, Food, Industrial Container Type:Bottle Container Material:PET, PE Sealing System:Self Sealing Ring Dimensions(cm):60x40x40 Weight(Kg):25...

...The ViscoTec dosing and filling pump RD-Hygiene for food and cosmetics is a volumetric pump based on the endless piston principle. It is ideally suited for discontinuous or continuous pulsation-free dosing of viscous, shear-sensitive, and solid-laden media. Thanks to the high-quality ViscoTec dispensers, dosing applications in the food and cosmetics sectors can be implemented with high precision...

... stainless steels. A special feature of these pumps, as a rule no additional seals are required on the pump. Only the tank is sealed towards the atmosphere. Media:for chemicals Operation:with electric motor Priming:self-priming,submersible Technology:gear Domain:industrial, for the chemical industry...

...Speck-Triplex offers system solutions for a wide range of applications. According to customer specifications, complete high-pressure units and pumping systems are manufactured with Speck high-pressure plunger pumps for various applications involving liquid media. Options in brass, spheroidal graphite, bronze, NiALBz (marine-grade), 1.4301 (AISI 304), or 1.4571 (AISI 316) for aggressive liquids are available. The sealing materials are tailored to the specific application. All components are high-quality branded products.

...Compact design and easy-to-use automatic vacuum packing function make the VacSy® bag Sealing Unit ideal for preserving a variety of foods. The supplied adaptor turns the sealing unit into a vacuum pump, and makes it compatible with VacSy® containers, universal lids and bottle caps. The built-in liquid sensors prevent the liquid from penetrating the device when vacuuming foods high in moisture...

... IDEAL FOR DISTRIBUTING PRODUCTS SUCH AS: muffins, plum cakes, tarts, flans, jams, sauces, fruit fillings, delicate fillings like mousse, salad dressings, soups, Russian salad, cereal creams, dairy products, etc. A WIDE RANGE OF ACCESSORIES AND DOSING OUTLETS allows for efficient work with different products: mold conveyor, hose and manual gun, transfer pump, rotary gun, injection nozzles, elevator, etc., elements that will make your work more precise.

...Cleaning the system with freon R141b (flushing liquid), similar to R11, can Be carried out by circulating through a pump with the connection of standard equipment (valves, inspection windows, fittings and filters) or using liquid nitrogen (pressure 7-8 bar). Vessels with R141b freon, equipped with connecting valves, can oe pressurized oy the consumer himself, out not more than 2/3 of the service...

...dispenser pump cliptype...

... motor winding. Ø Outlet: 1 1/4" Reference: 275.000097 Pumped liquid: clean water. Maximum liquid temperature: 35 ºC. Maximum sand content: 60g/m3. Power cord: 20 m of neoprene. Immersion depth: 20 m. Maximum number of starts per hour: 30 Power: 0.6Kw. Motor: 4.1 A. Capacitor: 16 uF. DNC: 1 ¼". Manometric height: 15 to 47m. Maximum flow rate: 4.5 m3/h.

...2ZE4 liquid ring vacuum pump can provide efficient operation over vacuum range from 160mbar-1013mbar without any need to change the pump internal parts. Our 2BE4 liquid ring vacuum pump is available in 20models, with capacity ranging from 2,000 to 32,300 m³/h. When equipped with a center shroud inside pump casing, split vacuum operation up to 400 mbar differential can be achieved. To satisfy...