standard resistance

...Standard resistance thermometer Ni120 Measurement range:-50 °C to +260 °C Electrical resistance:Ni120 Probe Ø:3.0–4.0 mm Probe length:50–500 mm Conductor:PTFE-Teflon Cable guide:open Conductor:Strand, Cuvs, AWG 24F, 2 x 0.241 mm² (19 x 0.127) Strand colour:white, red Wire length:500–5,000 mm Type of connection:Selection R ISO / 1000VAC:>200 Mohm...

...Resistance measurement, test automation, precise measurement, USB, automatic measurement selection - Test Automation: Automatic measurement range selection from 200 µΩ to 20 kΩ with a resolution of up to 1 nΩ. Standard interfaces (IEEE488, RS232, RS485), (USB and Ethernet optional). Monitoring of tolerances, statistical evaluations (classifying, sorting). Highest measurement accuracy...

...Flush security door with wall, featuring superior Italian design, with an external panel in fiberglass model URANO, galvanized steel structure, guaranteed by Italian certifications, comes with the following standard features: - Concealed hinges - Double seals - Thermal and acoustic insulation - 3D adjustable hinges - European cylinder - Burglary resistance class 4 - RC4 - External panel in fiberglass model URANO (available in 4 colors) - Internal panel in WHITE laminate...

... metric sizes. Upon request, the fittings can be manufactured in electropolished versions and various surface roughnesses. Our welded fittings are produced and tested according to the ANSI Standard B16.11. Our fittings ensure good weldability with all commonly available piping components on the market.

... support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 4,400 Nm at 210 bar. Operating pressure [bar]:207 Nominal torque [Nm]:1695 Holding torque [Nm]:4375 Swivelling angle [ degrees° ]:180 Momentkapazitat - Spreizmoment [Nm]:10170 Momentkapazitat - Auslegermoment [Nm]:5424...

... thermal insulation and fire resistance. Thermal conduction coefficient is λ = 0.022 W/m*K. PIR foams are characterized by strengthened resistance against high temperatures, they decompose at temperatures over 325ºC and their carbonization is ca. 50%. The carbonized layer protects against penetration of high temperatures through a board resulting in more efficient fire protection barrier. Diversified colours and profiles result in various possibilities for architects. ​ Thickness:40, 60, 80, 100 mm Module:1000 mm or 1140 mm Standard colors:RAL: 9002, 9006, 9010...

...Mark and secure your products, goods or rooms with robust, high-quality and meaningful labels from Förster Etiketten. Technical labels from Förster Etiketten are multifunctional. They not only provide the right look or important information, but also offer enormous resistance as required and withstand extreme temperatures or chemicals. From individual shapes, special materials to special finishes, you will find the right solution from Förster Etiketten.

...Made of PVC + nitrile rubber, it complies with European standard EN 20345, achieving excellent results against chemicals and organic substances. It has similar characteristics to Foca Blanca boots. With a sole designed to reduce the adherence of organic materials and any other type of dirt, it is extremely practical for tasks involving loads of up to 25Kg in hospitals, laboratories, operating rooms, autoclaves, as well as companies in the food sector such as cold storage facilities, canneries, or others.

...Approval Number ETA-12/0118 Type of Seal: Joint Seal Fire Resistance Class: E15, E20, E30, E45, E60, E90, E120, EI15, EI20, EI30, EI45, EI60, EI90, EI120 Components: Solid Walls, Solid Ceiling Test Standard: EN 1366-4 Type of Seal: Joint Seal Components: Solid Walls, Solid Ceiling...

... sheets can be ordered in different versions so that the perfect items are available for every application: For example, you can choose from models without steel reinforcement, with plain steel inserts and tanged stainless steel reinforcement. All graphite gaskets from our company are convenient for the targeted interaction between a high quality standard and improved health protection: you can order asbestos-free graphite sheets and many other types directly from us at a reasonable price. ...

...The large UNI Dicht system stands for high-quality, application-specific cable glands in the industry. High protection class, operational safety, and durability, as well as resistance to environmental influences and impact resistance, convince users worldwide. UNI Dicht meets all current EU requirements for cable and conduit entries – including the new fire protection standard for railway...

...-quality PTFE inner hose, which, due to its temperature resistance of up to +250°C, covers a wide range of applications. With the appropriate wire sheathing, these inner pressure hoses are particularly used when high demands are placed on chemical resistance and pressure load capacity.

... standard gratings, ensuring complete coverage of the fiberglass. Formats (mm x mm): 1000 x 2000 Mesh (mm): 50 x 30 Clear opening: 42 x 22 Height (mm): 28 Beam thickness (mm): 7/8 Weight (kg/m2): 15 Color: Natural translucent...

...Optimal protection for hydraulic hoses and electrical cables Rounded edges to prevent damage to hoses High resistance Very durable protective sheath against mechanical shocks and friction Resistance to chemical splashes Resistant to salts and hydrocarbons Very long lifespan UV and weather resistant Optimal operating temperature: from -20°C to +80°C Self-extinguishing PVC extinguishes itself if the flame is not sustained Recyclable Compliant with the RoHS (Restriction of Hazardous Substances Directive - lead-free) of the European Union, REACH, and CONFLICT MINERAL regulations Color: BLACK...

... provides an additional advantage for this series: In the case of moderate but continuous overload—especially during overvoltage—damaged and short-circuited sectors are gradually isolated from the circuit. Thus, the capacitor typically does not cause a short circuit in the intermediate circuit but ends up in an "open" mode. All housing and filling materials of the High Humidity series and the standard series without THB meet the requirements of UL94V-0.

...Versatile The nonslide diamond surface of Solid is available in two variants. AGO-Solid: In standard sheets with dimensions of 2,100 x 500 mm or cut to size. One-sided rubberized. Solid-Topsoft: In rolls max. 400 m x 1,550 mm. Smaller rolls are available on request.

... opting for the PERFORMANT 88 door. PVC profile with 6 chambers and a construction depth of 88 mm Maximum size for single-leaf doors 1200x2400 mm Seal: 2+1 Wide range of glass or panel options with a standard thickness of 52 mm Glass pack bar: Aluminum or Warm Edge Increased security thanks to the locking system with locks and hooks A wide range of construction options, single or multi-leaf doors, with transoms, decorative panels, or even arches. Colors: white, wood textures, matte, metallic, or two-tone. Thermal insulation: 0.80 W/(m²K) Acoustic insulation: 47 dB...

...The characteristics of Samarium Cobalt Magnet •Very high magnetic properties with good stability •High magnetic performance - up to about 32MGOe •Superior resistance to high temperature, Curie temperature of majority is over 800°C •Excellent corrosion resistance capability, no coating is needed for surface protection ...

...100% cotton. Twill fabric. ISO 15797 standard. Industrial washing at 85 °C (20 washes). Comfortable cut. Crossed V-neck. Left chest pocket. 2 large front pockets. 2 side openings/loops. Label for name placement inside the garment. Tear-away brand label. Country of origin: PK - Pakistan Customs code: 62063000...

...The Relax RDF standard mattress, for a matrimonial bed for two people, is made of hardwood, multi-layered beech, which offers flexibility and resistance over time, supporting a weight of over 350 kg. The slats of the mattress are slightly curved and have a width of 6.8 cm, thickness of 0.8 cm, being fixed in plastic supports (H20 boxes), embedded in the sides of the struts, which have a section...

... water resistance. Automotive: Used for lubricating parts like ball joints, chassis, and wheel bearings (in low- to moderate-speed applications). color:green NLGI:1/2/3 packing :Drum as per customer requirment ...

...Wear parts made from igus® tribofilament® are up to 50 times more wear-resistant than standard materials for 3D printing, achieving an exceptionally long service life. Due to their excellent tribological properties, they are ideal for 3D printing replacement and wear parts for applications such as sliding bearings, drive nuts, gears, and other wear components. Additionally, iglidur® i150 is...

... production line undergoes testing, and a sample is kept in our testing center for quality control in accordance with the ISO 9001:2015 standard. DURABILITY & FIRE RESISTANCE It's great to hear that BS Athletics takes the sustainability and safety of its flooring products seriously. The fact that we have obtained certifications such as EN ISO 5470-1: 2001 for abrasion resistance and UNE-EN ISO 11925-2: 201 for fire resistance demonstrates that they have undergone rigorous testing to ensure their quality and safety.

... LFTG processes and choppable to desired length. MECHANICAL PERFORMANCE Optimal adhesion to the Polyolefin resin matrix provides excellent dryasmolded mechanical properties and hydrolysis resistance. EXCELLENT IMPREGNATION & DISPERSION Both DLFT and LFTG processes show excellent dispersion within the final parts. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, extends service life compared to standard Eglass. PELLET (12MM):PP resin + Glass content 50% TENSILE STRENGTH (MPA):189 FLEXURAL STRENGTH (MPA):282 FLEXURAL MODULOUS (MPA):11447...

...Features: Excellent characteristics for power transmission - up to 70% more than standard single belts. Specially treated, durable outer material reduces flank wear and increases flexibility. The upper curvature and a special low-friction fabric and design enhance heat dissipation. Special aramid tension carriers for high tensile strength with minimal elongation. Designed for maximum load capacity, abrasion, and wear resistance. Ideal for heavy shock and impulse loads. Extended temperature range: -25°C to +100°C. Temperature range: -25°C to +100°C...

...Window seals are used to secure windows or windshields and ensure a good seal between glass and metal sheet. They are primarily made from EPDM rubber. Doors and windows must be absolutely airtight even under the most extreme conditions, and therefore need to have high resistance to shear forces. We have a large selection of standard profiles, but we can also easily produce the profile according...

...the good value for money choice for all standard applications high blowing power at significantly lower noise development flexible in user applications low air consumption Heat Resistance 90° C...

...Together they are a perfectly matched system for your application. We have a large range of standard pulleys on stock, which can be reworked according to your specifications. Special surface coatings, such as hard coating, anodizing, zinc coating, bronzing, improve the corrosion and wear resistance.

... range of applications. It has an anti-slip medium abrasive coating and a self-adhesive lower surface that ensures a quick, firm and safe installation. It has good resistance to ultraviolet rays and contact with water. It is resistant to changes in temperature, humidity, detergents.

...adhesive bonding, wire bonding, or welding). The FC sensors are available in different accuracy classes up to IEC 60751 F0.3 (IST AG tolerance class B) and in various sizes (0603 / 0805 / 1206 / other sizes available upon request). The IST AG FC sensors are ideally suited for applications with limited space and offer an optimal price-performance ratio. Due to their small dimensions, a standard 0805...