standard resistance Switzerland

...adhesive bonding, wire bonding, or welding). The FC sensors are available in different accuracy classes up to IEC 60751 F0.3 (IST AG tolerance class B) and in various sizes (0603 / 0805 / 1206 / other sizes available upon request). The IST AG FC sensors are ideally suited for applications with limited space and offer an optimal price-performance ratio. Due to their small dimensions, a standard 0805...

...The 36KyX series was specially developed for brackish water and sewage applications. It is equipped with a non-fouling Kynar separating diaphragm, which combines the anti-adhesion properties of PTFE with outstanding hardness and abrasion resistance. This level sensors design can be readily installed in harsh environments, eliminating the need for bulky, costly protective equipment. In addition to...

... mixture 0/45. The prerequisites for its frost resistance are clean material with low fine content and a well-graded grain structure. On this gravel base, a surface layer is applied as a roadway, either made of water-bound natural materials (e.g., KFN Netstaler 0-15 mm slurried) or asphalt and concrete. Many thousands of kilometers of forest and natural roads in Switzerland are also constructed from these gravel mixtures without a surface layer and are maintained with this material.

...On the metallic pure surface, a passive layer forms independently within a few days with oxygen. However, this passive layer is only about 2–4 nanometers thick. For parts that are chemically heavily stressed immediately after pickling, we recommend passivating the stainless steel. By passivating stainless steel, Stalderfinish chemically accelerates the natural process and significantly enhances the corrosion resistance of the chromium oxide layer. Your advantages: - Individual parts to large series according to standard EN 2516/C2 - Short delivery time...

...Available in several standard ranges from 2.5 kN to 1250 kN, these highly ergonomic pins can be used for either new or refitted installations and are adaptable to various conditions. For overload detection and load measurement:2.5kN to 1250kN (0.28tf to 140.5tf) Admissible Overload:150% of the nominal load Overload at Rupture:up to 500% of the nominal load...

... are specifically designed for use in wastewater treatment plants of the food industry. They provide precise measurements to meet the high requirements of process control. High-temperature resistance: The high-temperature electrodes are designed to operate reliably even under extreme temperatures. This ensures accurate measurements in challenging industrial environments.

... process connections as well as international certifications - at the best price-performance ratio. Measuring principle: Resistance thermometer Feature / Application: Metric version hygienic applications aseptic applications hygienic process connections Connection head: TA30A - Aluminum - Flip cover TA30R - Stainless steel blasted - Screw cap TA30R - Stainless steel hand-polished Protection tube: None...

...Up to five process modules can be placed on the Alpha 355 S. Despite its compact design, it offers excellent accessibility. In addition to the common standard processes of crimping and terminal assembly, a wide variety of process modules are available, such as: insulating sleeve assembly, MIL crimping, and ultrasonic or resistance welding modules. With the highly flexible software TopWin, the...

... transmitted safely and without interference, ensuring a long service life. As standard, the disc slip rings are available with an inner diameter of 12.7mm to 50mm and with 1 to 12 channels. Custom variants can be easily implemented. Number of rings: up to 12 channels 2 or 10A Inner diameter: 12.7 to 50mm Feature: Low contact resistance...

...Screw sleeve for HD high-pressure hose 8.6 x 4mm in steel, zinc/nickel Length = 28mm, Wrench size 12mm Advantages of ZnNi coating - Very high corrosion resistance - Free from chrome VI - The zinc-nickel base layer has a significantly higher corrosion resistance than zinc. White rust appears only as a light gray haze. - Proven to have better corrosion resistance than the previous A3C standard. - A well-established standard among European automotive manufacturers for years.

...Comprehensive range of low, medium, and high-pressure hydraulic hoses You will find a complete selection of fluid hoses with us. No matter whether your application requires special abrasion resistance, small bending radii, temperature resistance, flame retardance, or durability: for every requirement, we provide you with exactly the right hose (and of course the appropriate fitting) in all standard sizes. We also deliver the hose assembly correctly and ready-to-use, complete with the suitable fitting – and we guarantee flawless functionality.

... addition to the standard colors gray and black, other special colors are also available, e.g., for use with wooden slats: - white 100 - brown beige 215 - reddish brown 217 - light gray 335 - pastel yellow 505 - ivory 905 Request our color chart with belt samples.

... packaging Cheese packaging Coffee. FUNCTIONALITY Very good deep-drawing properties. ENVIRONMENT This material is compostable, standard DIN EN 13432 PCR (Post-Consumer Recycled Plastic) PIR (Post-Industrial Recycled Plastic).

...3-Layer Mask according to EN 14683 Bacterial Filtration Efficiency > 99%, Resistant to Liquid Splashes BFE (Bacterial Filtration Efficiency) > 99%. According to the standard, this type must meet a BFE of > 98%. Our mask demonstrably offers > 99%, which means double the safety. · Premium quality. Suitable for use in hospitals, professional settings, and at home. · 3-Layer Medical Mask, non-woven · Comfortable to wear with low breathing resistance · Pack of 50 pieces · Certified CE, EN 14683...

...Robert Fuchs AG ensures maximum and safe energy efficiency with its comprehensive range of low-voltage distributions. The type-tested busbar system impresses with its impulse voltage resistance and guaranteed short-circuit strength. The sizing of the busbars concerning the rated current complies with the DIN 43671 standard. This standard defines that at an ambient temperature of 35°C, the...

...Hoses for special cables made of PA - lightweight - good temperature resistance - high impact toughness - good pressure resistance - good chemical resistance to oils, fats, fuels, paint thinners, and hydraulic fluids - very good UV resistance - good stress crack resistance - high abrasion resistance - low pressure loss - available in various colors Temperature range -40° C to +90° C Standard colors natural, black, blue...

...IEC cable connectors and sockets from Bulgin for 250 VAC 10A, 3-pole according to Sheet C13, C15, and E. Standard range of straight and angled versions available from stock in our online shop. Features Number of poles: 3 Voltage: 250V AC Current: 10A Contact resistance: <10mOhm Insulation resistance: >10³MOhm Operating temperature: -40 to 70°C Contact material: Brass (Sheet C13 / C15), Nickel-plated brass (Sheet E) Re-attachable with screw terminals Nylon housing (UL94V-0) RoHS compliant Manufacturer: Bulgin The standard items are supplied in black. Other colors are available upon request.

... lubricating agents. The material EPB (standard) exhibits, among other things, high compressive strength, temperature resistance, and good heat dissipation. The plastic sliding bearings are ideal for use in large-scale production in the automotive industry or for special machine construction, for underwater applications, in the food, pharmaceutical, chemical, or tobacco industries, for temperature and chemical resistance, or for simple sheet metal penetration.

... pressure control are also already integrated. The EL3-pm mixer itself has been improved in terms of pressure resistance. The homogenizer motor is smaller and quieter due to external ventilation and three-phase power supply. The redesigned lid meets GMP requirements and can be better adapted to individual customer needs through an optimized arrangement of connections. However, the wide range of applications for the mixer (laboratory & production), the optimal mixing results, and the easy cleaning of the mixer have not changed.

... manufacturers. The use of Teflon hoses is becoming increasingly important as they offer many unmatched advantages. Available in various sizes, lengths, and colors. We also supply spiral hoses and custom shapes! Laboratory hoses from 0.25 mm to 8.5 mm, Standard Teflon® hoses from 1 mm to approximately 25 mm + from 1/32" to 1" materials. The key features of fluoropolymers are: chemical resistance, high thermal stability, low friction coefficient, UV resistance, and good electrical insulation properties. pkmsa.ch...

... wrapped in its box for hygiene reasons. Technical information Tested and approved with good ratings by the renowned Swiss laboratory SGS Each FFP2 mask is individually and hygienically packaged in a transparent, resealable film. Flexible, almost odorless, and comfortable to wear Low breathing resistance With elastic loops...

...Standard SN EN ISO 7010 EXPOLIT TR520, High Performance, according to ASTRA and SBB guidelines L ight density: 520/55 mcd/m2 P eraluman, hardened aluminum, 2 mm, high mechanical strength and corrosion resistance A mbient temperature range: -40°C to +180°C C leaning-resistant clear coating, mechanical and chemical resistance, anti-graffiti protection P re-drilled for screw or hanging installation TR520, High Performance (Signs on page 9) S ymbol: 300 x 150 mm / Outside: 320 x 170 mm S ymbol: 400 x 200 mm / Outside: 426 x 226 mm S ymbol: 600 x 300 mm / Outside: 640 x 340 mm...

... for testing fields and laboratories - Portable calibrators for electrical, thermal, and mechanical quantities - Precision and high-precision resistance decades - Calibration devices for mechanical quantities - Standard and precision resistors Signal processing for the process industry: - High-quality devices and systems for analog and digital signal processing - Measurement data processing and...