temperature sensor calibration

... humidity - Fast response time - High chemical resistance - Wide humidity and temperature range - I²C protocol (address 0x28 or alternative address) - Direct replacement without calibration possible Article number: MAT-HYT221 Sensor: Ceramic substrate with capacitive polymer sensing element Operating voltage: 2.7 - 5.5 V Measurement range: +/- 1.8 % 0 - 100% rF Temperature range: +/- 0.2 °C - 40 - + 125 °C Connection: SIL contacts RM 1.27 mm Dimensions: LxWxH 15.3 x 10.2 x 5.3 mm Current consumption: < 1 µA (25 °C sleep mode)...

...Supplied with a transport case. SKU: 26254 Maximum measurement capacity: 5000 kg Minimum measurement: 10 kg Operating temperature: -25 to +70°C Battery life: +/- 1000 hours Sensor dimensions on cable: 589 mm x 254 mm Weight: 3.5 kg Additional information: CUSTOM MADE, REQUEST ADVICE...

...Additionally suitable for automatic climate monitoring of pressure rooms and paper storage. A powerful handheld hygrometer for moisture measurement with innovative sensor technologies. Fast - Cost-effective - Automatically documented. Features: + Relative humidity 0 to 100%, resolution 0.1% RH + Calibration 10 to 90% +/-1.5% RH (at 25°C) + Temperature can be switched between °C and °F...

...Oxygen combination sensor with built-in Type S thermocouple and holding tube connection. The standard dimensions are connectors with 22 x 150mm or 27 x 150mm in stock. The sensor is not heated. Minimum operating temperature is 500°C Configuration: Connection head form A with M20x1,5 cable gland Pressure range: Ambient to max 2 bar pressure Fitting: Thread G3/4" DIN 228 Thermocouple: 1 x...

... analog output. The current output is read back by the F01 to ensure the output signal is emitted correctly. To be able to use the F01 in many applications, users can select different pressure connections. The electrical contact takes place via a 5-pole M12 connector. Through the calibration of the transmitter via temperature, a total accuracy of 1 % FS can be achieved within a range of 0...80 °C...

...The DAIP offers the user extreme ease of use combined with the advantages of the heated sensor tip. Thanks to the auto-zero function, direct calibration can be performed on the device or from the control room. The mass pressure transmitter provides mA or V signals at the output. Thanks to the patented sensor tip, the sensor can also be removed in the case of already cooled molten mass. This...

...Shares battery compartment of the tester with a lifespan of approximately 2000 hours - Display equipped with an LCD screen - Temperature sensor - Fitted with waterproof rings on the top and bottom - Replaceable electrode - Automatic calibration of pH value and temperature detection in °C and °F Specifications: Display: LCD screen TDS Factor: 0.5 Temperature accuracy: ±0.5 °C Temperature...

... calibration curves that support most standard low-temperature sensors. Additionally, eight custom calibration curves are available for custom or calibrated sensors. Each user curve can have up to 200 entries. The temperature range depends on the specific sensor type and ranges from 500 mK to 1200 Kelvin. The controller offers various interfaces such as Ethernet, as well as optional GPIB and USB. LabView drivers are available for all interfaces.

...-processing of the data. Highlights - Low power consumption - Very low noise, large dynamic range and high linearity - Digital temperature compensation minimizes drifts - Sensor output digitally error-corrected with respect to scaling and offset - Small size and lightweight - Single coaxial cable for power and data introduces minimal magnetic signature...

... FPM (Viton®) gasket ▪ Weight: 200 g / .44 lbs ▪ Suitable for gases and liquids (in the case of aggressive media, only after consultation) ▪ Accuracy (±0,25% FS* typ.) ▪ Automatic sensor recognition ▪ Pressure connection G1/2 (without adaptor) ▪ Calibration certificate on request Ambient Conditions ▪ Media temperature: -25 °C ... +105 °C /-13 °F ... +221 °F ▪ Ambient temperature: -25 °C ... +85 °C / -13 °F ... +185 °F ▪ Storage temperature: -25 °C ... +85 °C / -13 °F ... +185 °F ▪ Compensated range: 0 °C ... +85 °C / +32 °F ... +285 °F ▪ Load cycles (10 6): 100 Electrical Data ▪ Response...

...Oxygen sensor with integrated temperature sensor for measuring dissolved oxygen Features • Galvanic principle oxygen sensor, mounted in a robust immersion housing • Measurements independent of flow • Calibration possible in air or in air-saturated water • Long lifespan • Direct insertion into open water or water basins possible • High cost efficiency • No defined flow required Applications • Process control • Wastewater monitoring • Drinking water monitoring • Aquaculture...

... analyzed. Depending on the model, the sensor can be used for a temperature range between 500 and 1050°C. The signals provided by MicroPoas® are captured by one of our evaluation electronics (ATS2020 or Oxybox’Air), which allows for a 4-20mA output signal proportional to the measured oxygen concentration to be displayed or delivered. APPLICATION EXAMPLES Heat treatment Combustion control Waste incineration Crematorium...

...2-channel temperature measuring device with external sensor connections including wall mount, lock, batteries, and calibration protocol. Sensors available in different designs. Large memory for 1 million measurement values - large, easy-to-read display.

... out to WORD), N2 and O2 rotameter mass flow controller, Hoses and connectors, Software also has data export to advantage Software for analysis, DSC measuring cell according to the heat flux principle, temperature sensors for control & sample temperature, Connection for Purge gas flow to the sample for 2 gas types, Temperature accuracy 0.1 C, Sensitivity: 3.6 to 4.0 μV/mW , Sensor Time constant: 2.5 s, calorimeter accuracy of ± 2% and calorimetric precision of ± 0.5% or better, Two connections for purge gas-Inlet to the sample & 1 connection for protective gas Inlet with gas flow adjustment,...

...Accuracy ±0.15%. Excellent temperature compensation Welded stainless steel construction 3 mv/V output Internal shunt calibration...

... Measuring Unit: Pa Smallest Measuring Span: 0…200 Pa (2 mbar) Measuring Range Selection: Factory preset Storage Temperature: -25…+60°C PERFORMANCE: Overload Safety: 0.2 bar Static Pressure: Max. 0.2 bar Zero Point Calibration: Adjustable via REED contact, no cyclical zero point calibration required Reaction Time: Immediate...

...Measurement ranges from 0 to 1000 bar to 0 to 5000 bar Accuracy ≤ 0.2% F.S. Average temperature range from -30 °C to 120 °C Ideal for dynamic measurements Protection class IP66 Digital calibration with the option of integrated instrumentation amplifier Measurement range: 0 ... 1000 bar to 0 ... 5000 bar Accuracy: 0.2% FS...

... when moving between a high and low dew point process • Easy-to-use, simple operation, operator training in minutes • Rugged capacitive sensor • Long life rechargeable battery • NIST traceable calibration • Calibration certificate supplied with factory calibration...

... with an infrared sensor 0 - 20% - CO2 ppm 0 - 10,000 ppm - CO 0 - 2,000 ppm - Differential temperature - High precision differential pressure sensor +/- 80mbar Calculates - O2 - CO / CO2 ratio - Excess air - Combustion efficiency Fuels - Natural gas - Butane - Propane - LPG - Oil - Wood pellets Contents of the reference - Analyzer - Probe - CO2 zeroing capsule - Charger - Manual - Calibration certificate - Printer (optional)...

... technology (automatic adjustment of the best x-ray energy) Compensation of forming belt inuences Two high speed traversing measuring heads for fast detection of weight variations in production direction No active cooling unit required (long life time of x-ray tubes) Automatic inline calibration during panel production Automatic compensation of sensor contaminations Automatic compensation of sensor temperature drifts Advantages The EcoScan NEO - FBD is able to detect smallest foreign bodies in a ber mat to prevent damages to the press belts.

... applications. Specification: Measuring Principle: Thermal Mass, CMOS Sensor Sizes: ¼" and ½" Female G Flow ranges: 2 nml/min to 300 nl/min Accuracy: +/- 1% FS Calibration Gases: Air, O2, N2, He, Ar, CO2, H2, CH4, C3H8, SF6, and more upon request.

...pH Bluetooth Electrodes with Temperature Sensor HALO™ connects at the push of a button to a device up to 10 meters away. The activity of an electrode – measurement and data transmission – can be identified by the blinking blue LED ring. Once connected, the calibration data and other parameters are automatically transferred to the connected device. Energy-efficient and reliable. The Bluetooth®...

...The high-contrast and easily readable large number color display shows the relative humidity, temperature, and dew point. Laser for non-contact surface temperature measurement. A calibration function allows for long-term use without loss of measurement accuracy. Switchable °C / °F. With permanently attached sensor. Measurement range: +20 - +50 °C or < 90 % r.H. Accuracy: Temperature: +/- 0.2 °C...

...The BW Clip series of single gas detectors offers up to three years of maintenance-free operation. This means greater flexibility and no downtime. - Up to three years of completely maintenance-free operation - Automated test routine for increased safety - No calibration or adjustment required - No battery or sensor replacement - Compact, lightweight, and user-friendly - intuitive operation with...

...Thermometer Hygrometer CO2 Detector Audible and visual alarm for threshold exceedance Electronics Auto-calibration NDIR technology (non-dispersive infrared sensor) Battery level CEROSH certificate Can be placed or hung CO2 level in ppm Ambient temperature and humidity Indicates when to ventilate a room; a doubled CO2 level multiplies the risk of COVID-19 transmission by 2 Concentration: 0/10000...

... Temperature: 60-120 °C (in less than 1 minute) Operating Environment: ≥ 25°C – 28 °C Power Requirements: 220 V, 240 W, 50Hz, 0.89A Connections: USB, SD card, WIFI Recognized File Formats: STL, Gcode Filament Change: Automatic with sensor Platform Calibration: Automatic Compatibility: Windows 10, Windows Vista, Windows 7, Linux, Mac OS European Conformity CE Mark: Yes...

... mass flow base on thermal dispersion theory. It combines COMATE’s advanced technology on transmitter, sensor, filming and calibration, can provide stable and accurate measurement even under harsh industrial applications and require very less maintaining.

... measurement values are in view, and the hot-spot display quickly and easily locates the core flow. Easy, intuitive operation, the latest technology, and an ergonomically shaped housing with a soft case and integrated magnets are just a few of the outstanding features of the Fyrite® INSIGHT® Plus. The B-Smart® sensor technology allows users to replace the sensors on-site, eliminating the need for factory calibration. A long-lasting O2 sensor is also available. The flue gas measuring device is fully equipped and ready for immediate use.

... and compact. The sensor compartment is completely sealed, not allowing dust or insects to enter. It is located in the center of the sensor head. This allows heat radiation from the electronics and the infrared lamp to keep the unit a few degrees above the ambient temperature thus avoiding condensation. This innovative design makes any additional heating unnecessary, allowing the sensor head to be...

... thermal or infrared sensor. The standardized output signal of 4-20mA simplifies integration with existing systems. Calibration and adjustment can be performed as a one-person calibration without the need to open the housing. Power Supply: 24V Power: approx. 3.3 W Operating Temperature: -25°C to +60°C Signal Output: 4 to 20 mA and Modbus Housing: Aluminum alloy / Stainless steel Weight: approx. 1300 g Dimensions: Diameter 95 mm, Height 82 mm Connection Cable: 4-core, shielded cable Gas Type: Butane...