injection-moulded parts- technical

... plastic and rubber. The portfolio is complemented by hoses, stamped parts, and profiles. A particular advantage is the in-house production of plastic molded parts. The fully automated 24/7 production ensures maximum cost-effectiveness for both small and large series. A specialty of the company is very small molded parts under 10 mm. In addition to product diversity, there is the logistics service: Customized C-parts management and Kanban solutions emphasize market-oriented performance and customer focus. Schauenburg Industrietechnik GmbH is certified according to DIN EN ISO 9001.

... These parts are made from various elastomers: natural rubber, SBR, neoprene, nitrile, EPDM, hypalon, viton, silicone, polyurethane, etc. Items in neoprene and items in nbr, epdm items, rubber hoses and bends, rubber injection, molding of neoprene parts, molded plastic parts, molded pp parts, molded pom parts, molded polyurethane parts, plastic injection, rubber profiles and tubes, silicone...

Holz-Plast Plastic and Timber industry Ltd (Holz-Plast Műanyag és Faipari Kft.) was founded in 1994 as a family business. From 2021, under new ownership and with renewed development ambitions, it continues its successful production processes. The company is engaged in moulded plastic products that meet high quality and technical requirements. Mainly as a supplier to the automotive industry, and...

... comprehensive technical expertise not only offers you advantages in the production of application-specific plastic parts. Rather, we are your project companion and problem solver from conception to ready-to-install parts or complete system solutions.

Since 1985, the company PERIFERI, located in Woustwiller in Lorraine, has specialized in the design and manufacturing of finishing machines for blown and injected plastic parts. We specifically produce conventional and clean welding machines (hot gas, laser, infrared), cutting, punching, assembly, hot or cold insert placement, and leak testing. We have various technical means for the design of...

Manufacturing of custom injection molded parts - from small series to mass production. Over 30 years of experience, utilizing a wide variety of plastics, complete manufacturing possible. Customers from various industries: construction, electrical industry, ladder industry. Production site in Germany. Through our own photovoltaic system, we produce most of our electricity needs ourselves. With our own mills, we can reintroduce waste products from injection molded items back into the production process.

... production machines. We process all common plastics (except hard PVC) into injection molded parts weighing from 1 to 800 grams. Our constantly growing machine park is perfectly coordinated to produce both small and large series just in time. Just in time: We not only support you in the production of your products, but we are also able to stock a standard range of items for you through our continuously expanding storage space. This helps to avoid supply bottlenecks and, in collaboration with renowned logistics companies, makes urgent orders possible without any issues.

Welcome! tooliss gmbh is a company specialized in technical plastic parts and lightweight metal castings. tooliss provides its customers with optimized ideal solutions in terms of technology and cost-effectiveness. The goal is always to prevent unprofitable processes and technological stopgap solutions and to offer better alternatives. tooliss gmbh operates fundamentally technology-, process...

... source. This includes not only all accessories for "Vorhangschienen" but also a variety of technical plastic small parts for various applications and industries. From small batches to complete constructions and series.

A technology forge in the middle of the Black Forest introduces itself: Housed in an old sawmill building. Agile and creative. Technical and decorative plastic injection molding. CNC manufacturing for small quantities. Assembly and logistics. Sophisticated application-oriented IT organization. Cross-technology series parts. IT: buzzi runs buzzi Who we are: We are a small company with around...

...KBS Injection Technology, a company of the BURGER GROUP, manufactures high-quality technical plastic injection molded parts at its location in Schonach. Together with its partner company SBS Precision Engineering, customized drive solutions are developed and produced for an international customer base. The five main markets are the automotive/automotive supplier industry, building technology, household and medical technology, as well as machinery and plant engineering.

MEESE punching and remodelling technology with its team of motivated and qualified employees is ready to meet your requirements. Modern technical production processes, an efficient stock of machines and our philosophy of quality allow us the possibility to deliver you a wide range of services with products of constant high quality. According to your demands we produce small series for you as well as several million parts. Profit from our flexibility and short delivery times!

...Modern technical products require stamped and bent parts that meet the highest standards. So don't experiment – do it right: with us.

Customers from various industries benefit from our prompt and reliable service through our expert knowledge: - Railway technology - Construction technology - Electrical industry - Building technology - Machinery industry We support our clients with new product ideas by accompanying them with experience and innovative strength from the idea to the final product. Competent support, comprehensive s...

NIVEX P+P Ltd., established in 1986, is a 100% Hungarian privately owned company manufacturing custom-made injection molded technical rubber parts and injection molds. Products: seals, lip seals, O-rings, grommets, cable bushings, boots, bellows, shock absorber rubber parts, membranes, closing covers, rubber-metal bonded parts, and other molded rubber parts used in various industrial applications...

... injection molded products. The respective plastics can, of course, also be filled with talc, conductive, flame-retardant, or reinforced with fiberglass. Recently, high-performance materials have been used for parts that were previously made from metals. High-temperature resistant thermoplastics are used, for example, in the automotive and aerospace industries. Challenging technical developments have often only been realized with newly researched plastics. In this area, Gebrüder Berens meets the high demands for quality and, above all, for the safety of the material.

Murrplastik Production Technology develops and manufactures complex technical plastic parts, mechatronic assemblies, vacuum cans, and valves for the automotive industry and machinery and plant engineering. In addition to hybrid plastic technology (overmolding of metal), we meet your requirements in silicone and 2-component injection molding. Expanded manufacturing technologies such as fully automated robotic assembly, ultrasonic welding, laser welding, leak testing, adhesive processes, etc., complete our program.

...We are a Finnish manufacturer of technical rubber molded parts of almost all kinds. We produce molded parts using injection molding and die casting processes, as well as hoses through extrusion and winding methods. Our product range includes, for example, bellows, pedal plates, cable entries, seals, rubber/metal elements, coolant hoses, intake air hoses, and charge air hoses.

...The company Claus Groth was founded in 1948 by the former owner Klaus Groth. In the early days, hand cleaning brushes made of plastic were developed and manufactured. However, by the 1970s, the first technical components made of plastic were developed. This specialization was further focused and refined by the later owner Helmut Strate. Since 2005, the "junior manager" Jens Strate has been...

Ambros Hanauer GmbH, based in Weiden in der Oberpfalz, originated from the initial family business Ambros Hanauer and was restructured into Ambros Hanauer GmbH in 1990. For about 50 years, it has been engaged in the production of high-precision zinc and aluminum die-cast parts. Die-casting and injection-molding tools (plastic parts) are developed, manufactured, and maintained in our own modern...

For 100 years, the company PKKT has been active at its location on Kronenstraße in Solingen. Founded in 1917 by Johann Knupp as the company JKOS, it quickly made a name for itself as a manufacturer of tailoring technology. Originally a producer of metal goods, plastic processing was added in the 1950s, significantly expanding the product range. Today, PKKT produces for leading automotive and furni...

Witte Bitburg GmbH is the competence center for plastic technology within the WITTE COMPONENTS business sector, serving the electrical and automotive industries as well as household technology.

HSV Technical Moulded Parts; Large plastic injection molded products developed, produced, and assembled to your specifications. HSV TMP is one of the leading European manufacturers of large plastic injection molded products, driven by a passion for plastics. Would you like to meet us in person? Feel free to get in touch.

Monaris d.o.o. is one of the leading rubber product manufacturers in Croatia. Manufacturing rubber products according to drawings and samples for automotive, construction, and household appliances. Own mixing plant - second phase. Production - injection molding, pressing, extrusion, autoclave vulcanization, IR vulcanization - tempering.

... protection of products - Technical foils, polymer foils with surface functionality such as self-cleaning and anti-reflection - Protein coating, integration of fully functional proteins in injection moulded polymer parts. MoldGrfx is a technology by which injection moulded plastic parts can be produced directly with holograms. Besides the decorative aspects, holograms can be used as anti-counterfeiting elements to protect intellectual property.