Results for

Iatf 16949 - Import export

73 Companies

20 Products

ESCOMAG GMBH

Germany

ESCOMAG GmbH – consulting, services, seminars and process support for quality management, environmental management, risk management, quality assurance, quality control, management systems. We offer practice-oriented management consulting, system support, interim managers for the development or further development of your management systems for all common standards, for the automotive industry, medical technology, aerospace and the defence industry as well as in mechanical engineering. We are specialists in quality and environmental management with a focus on the implementation of integrated management systems, organisational development, support in quality assurance, screening inspections and reworking as well as in the training and coaching of employees. We support you with qualified employees and certification auditors. Our services in detail: – System audits (IATF 16949, DIN EN ISO 9001, DIN EN ISO 14001), process audits according to VDA 6.3 as well as CQI-Rules (CQI-9, CQI-12, CQI-14, CQI-23) and supplier audits. – Help with complaint management (automotive core tools 8D problem solving), complaint management, 8D systematics, Ishikawa, 5 Whys, problem analysis, problem solving method, root cause analysis, warranty processing, damaged parts analysis field, 8D report evaluation. – FMEA error possibilities and impact analysis. – Quality inspections, screening inspections, reworking. – Documentation, forms, certification preparation. – Training

Website
NINGBO ZHAOBAO MAGNET CO., LTD.

China

ZHAOBAO MAGNET, established in 1999, with a rich export history spanning 20 years, our magnets have reached 86 countries and regions worldwide. Our impressive annual production capacity for NdFeB rare earth permanent magnets stands at 8, 000 tons. Magnet capacity for EV Drive motors is over 3 million sets. As a leading magnet manufacturer for elevator in the world, annual magnet production volume for elevator motors is more than 350, 000 sets. Beside of the two strategic markets, automotive industry and elevator motors, more than 95% of our permanent magnets are applied in other high-end applications, especially in all kinds of energy-efficient permanent magnet motors and generators. As a team of 526 employees, we have a strong R&D team, and own a complete production chain and perfect quality assurance system. We are a SA8000: 2014, IATF 16949: 2016, ISO 9001: 2015, ISO 14001: 2015, ISO 45001: 2018, certified company. Based on the cooperation principle of “Long-Term & Win-Win”, with our more than 20 years of professionalism and sincerity, we look forward to providing reliable rare earth permanent magnets and technology，and service support for our partners.

All the products for "iatf 16949"

Magnets With Kinds of Specifications and Applications

Magnets for Industrial PMSM

Magnets for Wind Generators

Magnets for Elevator Motors

Magnets for Industrial Automation Servo Motor

Website See all products
ACKOR MOULD LIMITED

China

Founded in Dongguan, China, in 2003, Ackor Mould Limited has dedicated the past two decades to collaborating closely with customers to provide optimal solutions for injection tools and molding products. Our comprehensive services encompass everything from mold manufacturing and injection molding production to final product assembly. Key markets include Japan, the EU, and America, where we've established robust partnerships due to the trust bestowed upon us by our valued customers. With extensive experience spanning various industries such as automotive, medical, electronics, cosmetics, and electrical, Ackor Mould Limited has emerged as a trusted provider. Our proficiency extends beyond injection tooling to services like CNC machining, Silicone Moulding, Rubber Moulding, Metal Pressing, and Plastic Vacuum Forming. From humble beginnings, Ackor Mould Limited has grown substantially by adhering to core principles of quality and competitive pricing. Our commitment is evident in our relentless pursuit of meeting customer requirements and delivering cost-effective products of the highest standards, from the initial inquiry through production to timely delivery. Specializing in injection mold toolmaking for over two decades, Ackor Mould has earned a stellar reputation in the domestic and overseas injection tooling industry. Our expertise is showcased in the diverse sectors we serve, including automotive, medical, electronics, cosmetics, and electrical.

All the products for "iatf 16949"

Injection moulded plastic parts

Insert Moulding

Double-Injection manufacturer

Moulds for automotive parts

Injection molds

Website See all products
ERDEM REFRIGERATION

Turkey

Established in 1979, ERDEM REFRIGERATION has emerged as a premier manufacturer of Refrigeration Components, air-conditioning systems, and spare parts in Turkey. With over 43 years of experience in the refrigeration sector, we proudly serve diverse markets encompassing automotive and industrial sectors both domestically and internationally. Our product range includes: •Filter Dryers •Liquid Tanks •Liquid Accumulators •Oil Separators •Oil Tanks •Combined Liquid Receiver with Accumulator •Customized solutions tailored to precise specifications for our customers. With a global presence spanning over 38 countries, we are dedicated to delivering excellence. At ERDEM REFRIGERATION, efficiency is fundamental. We closely monitor technological advancements with our dedicated R&D team to ensure innovative solutions. Our streamlined production process guarantees swift delivery within a 2-week timeframe, with flexible scheduling options to meet your specific requirements. Quality assurance is our priority, with products subjected to rigorous testing procedures to uphold the highest standards of excellence. Endorsed by European laboratories, our certifications— including IATF 16949, ISO 9001, ISO 14001, ISO 45001, and PED 2014/68/EU for pressure equipment productions—validate the reliability and safety of our offerings. ERDEM REFRIGERATION adheres to global quality standards, further ensuring the superiority of our products. For additional information or inquiries, contact us!

Website See all products
MAROVT D.O.O.

Slovenia

MAROVT D.O.O is a company based in Slovenia specialized in forging, machining of forged parts and production of turning parts since 1971. We pride ourselves in being are the most technologically advanced forging production in Slovenia and one of the most advanced in Europe. We produce high-precision forged parts in our own machining plant. We provide our customers with a comprehensive range of services in short deadlines at competitive prices. Among our references we can count the most prestigious leading brands in the automotive industry such as Daimler-Mercedes, Audi Group, Volkswagen Group. We also collaborate with well-renowned companies of various sectors including aviation, nautic, medicine and the military. Our production is managed in accordance with the highest quality standard IATF 16949. We work with materials such as carbon steel, all types of alloy steels and mostly stainless steel. Our processes enable forging with extreme precision. The high level of automatization and digitalisation of our production enables us to operate with high flexibility to adapt to market changes. This is possible thanks to modern software and permanent investment into up-to-date technology, enabling to us to provide our customers with fast and appropriate solutions, thus meeting all their needs. Don't hesitate to contact us for more information !

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

PRODUCTION IN TIME ZERSPANTECHNIK UND HANDELS GMBH

Germany

PIT means Production In Time and stands for quality-conscious just-in-time production in the CNC turning industry. PIT produces absolute high-end precision and items only leave our factory if they can meet this standard. PIT GmbH is one of the smaller SME companies in this industry that have been successfully certified to ISO 9001, IATF 16949 and ISO 13485. Feasibility analysis: This important tool is the cornerstone for every single project that starts in our company. Precise piece time calculation: The determination of cycle times influences the process cycle immensely. A professional approach involving the expertise of experienced employees is a matter of course for us. Detailed and fair calculation: Direct and open communications with suppliers as well as customers should not be neglected in pricing. We have been successfully working with various suppliers of raw materials and tools for years and feel their trust. Offer development: The use of professional “requirements engineering” is the basis for the preparation of an offer. No offer leaves our company before it has been personally coordinated with our customers. Project planning & Development: With the application of the APQP process, we steer our projects to success in a targeted manner. The individual milestones are closely tracked and always completed with professional dedication.

Website
WILHELM-PLASTIC GMBH & CO KG

Germany

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Website See all products
SCHNEIDER & GEMSA GMBH

Germany

Schneider & Gemsa offers dedicated and professional solutions for customers from the automotive, industrial, telecommunications, traffic management, medical and electronic equipment sectors. Our manufacturing capabilities range from one-off and assembly-based manufacture to the complete manufacture of terminal devices and complete system solutions. We move and operate complete "business areas" – fully and semi-automatic production lines in affordable locations. Our sites in Germany, Czechia and Moldova enable us to offer cost-optimised solutions and services. Schneider & Gemsa has many decades of expertise in cable assembly, mechanics, mechatronics, electronic equipment, sensors and actuators. Since the company's foundation, we have produced several million electric adjusting motors, mechanical and electrotechnical assemblies and end devices. Our cable assembly produces strands as well as data, sensor and control cables, wiring harnesses and control cabinets with innovative technologies using the latest machinery and tools. Our own equipment workshop manufactures individual assembly, manufacture and inspection equipment. We consider quality, environmental protection and the conservation of resources to be essential aspects of our activities. Our company complies with the standards DIN EN ISO 9001: 2015, IATF 16949: 2016 (automotive) and DIN EN ISO 14001: 2009 (environment) at all sites.

Website
WEBER GMBH & CO. KG, KUNSTSTOFFTECHNIK UND FORMENBAU

Germany

The Weber Group is a development supplier and system partner providing sophisticated plastic solutions for customers in the automobile, building technology and household appliance sectors. With approximately 1, 300 employees, this medium-sized family business develops and manufactures products at sites in Germany, Poland and China. In addition to its core business of plastics technology, wezi-lit sealing putties have been an additional area of operations of the Weber Group since it was founded in 1949. The company is certified DIN ISO 9001, IATF 16949, DIN ISO 50001 and DIN ISO 14001. Calling on its expertise and passion, the day-to-day mission of the Weber Group is to create fascinating ideas and exceptional solutions offering customers outstanding benefits.

Website See all products
KRS - SEIGERT GMBH

Germany

KRS-SEIGERT GmbH is an internationally recognised manufacturer of roller elements in the form of balls, needle rollers and cylindrical rollers, as well as special parts made of different materials and qualities. Our company is a supplier to the automotive and commercial vehicle industry, the bicycle and motorcycle industry, for mechanical engineering, the bearing, furniture and household appliance industries. Our miniature balls are used with high precision in medical technology, the computer, clock and watchmaking and writing instrument industries. With our large balls of a diameter up to 250 mm, we serve large bearing applications in the field of renewable energies as well as heavy mechanical engineering. Certified according to IATF 16949: 2015, DIN EN ISO 9001: 2015, NAT certificate, EMAS certificate and DIN EN ISO 14001: 2015.

Website

INNOCOSO GMBH

Germany

The name Innocoso stands for "innovative connector solutions" – our customised connection solutions. But Innocoso GmbH is more than just a professional plug manufacturer. We consider our customers' wishes and problems as our own. With all our competences in the area of connectivity, we see recognising all potential difficulties as a priority and challenge. We provide a perfect fit solution – supporting you from the concept, design, simulation and testing to the final product. In addition to our standard products, our connector specialists will support and advise you when creating your tailored products in the closest collaboration with us. Our manufacturing facility is certified according to ISO 9001 and IATF 16949. Thanks to the modern and flexible production processes, we supply extremely high-quality and reliable products in a wide range of industrial and automotive areas.

Website
SITEC INDUSTRIETECHNOLOGIE GMBH

Germany

As a system partner we develop, manufacture and supply customer-specific production technology worldwide as original equipment manufacturer. Our trademark includes flexible assembly systems, laser systems and systems for electrochemical metal processing for the automotive industry, electrical engineering/electronics, medical technology and alternative energy technology. For years, SITEC systems for the automotive industry have been used to fully automatically assemble and laser process high-pressure pumps, water pumps, oil pumps, shift forks, steering systems, camshaft adjusters, stators/inverters, piston rods and components for battery systems and fuel cells such as cell connectors, battery terminals or bipolar plates. In the field of medical technology, industry-compliant systems for the assembly and, in particular, laser micromachining of membranes, implants and surgical instruments are developed and built. In parallel to mechanical and plant engineering we have been producing assemblies and components for customers in the automotive industry in certified quality according to IATF 16949 for many years. Synergy effects result from our technological competence and tailor-made mechanical and plant engineering.

Website See all products

Product recommendations

Bulgaria

Germany

China

China

See more products

J.H. ZIEGLER GMBH

Germany

J.H. Ziegler is your specialist partner for needle fleece materials, foam-fleece composites, non-woven materials with a multilayer structure and laminated materials with a number of different areas of application: As highly efficient acoustic absorbers in automotive interiors and exteriors; as laminating material for leather lamination or material for understitching of vehicle seats and chairs; for acoustic and thermal insulation in buildings and properties; and various other applications that include composites and abrasive discs. Currently, our manufacturing team consists of 390 employees divided across Germany, Hungary and China. In addition to synthetic fibres such as PET and PP, technical fibres such as glass and oxidised polyacrylonitrile are used. Depending on requirements, Ziegler fleeces can be water-repellent (hydrophobic), oil-repellent (oleophobic), flame-retardant and/or have insulating properties. They can be laminated with foam, leather, fabric, spun-bonded fleece, film or a number of other materials. We are certified in accordance with IATF 16949, ISO 9001, ISO 14001, and OEKO TEX Standard 100.

Website
KOVINSKI IZDELKI HRAST CNC TURNING

Slovenia

Kovinski izdelki Hrast d.o.o. is a company that can be qualified as a development supplier. When it was founded in 1985, we were based in Borjana. Since 2012, we are based in Breginj due to our increasing activity. We manufacture and supply CNC turned parts and machined components. Our skilled workforce, our precise work, our experience and the high quality of our products explains how Kovinski became a leading provider of industrial solutions. Our customers come from different fields such as automotive, electro, white goods, hydraulic, pneumatic and machine building industries. We use a wide variety of materials : stainless steel, aluminium, carbon and hardened steel or brass for example. We are also specialized in plating, heat treatment and griding. We develop products based on customer specification. Our products include sensor housings, screws, pins, shafts and connectors. We follow the manufacturing of our products from raw material to finished components, which ensures traceability. We are proud to be certified ISO 14001: 2015, ISO 9001: 2015 and IATF 16949, which helped extending our presence on the international market. To comply to this norm, we use the latest measurement equipment and methods (contact or non-contact), including CMM measurement of complex geometries.

Website See all products
RAMPF POLYMER SOLUTIONS GMBH & CO KG

Germany

Innovative solutions for sealing, bonding and casting. A technology driver and quality leader: Based in Grafenberg near Metzingen, RAMPF Polymer Solutions develops and produces state-of-the-art casting resins based on polyurethane, epoxy and silicone. RAMPF Polymer Solutions' product range includes liquid and thixotropic sealing systems, electro-casting resins and gap fillers, structural casting resins, edge casting systems, filter encapsulation systems and bonding systems. Products in the RAKU® PUR (polyurethane), RAKU® POX (epoxy) and RAKU® SIL (silicone) ranges guarantee the optimal solution for your application. Research and development is a top priority for RAMPF Polymer Solutions: A large-scale innovation centre is available for laboratory and application technology. Every day, we work to develop new products, adapt existing products to individual customer requirements and test new material combinations. RAMPF Polymer Solutions is ISO 9001, IATF 16949, ISO 50001 and ISO 14001 certified. Our products are listed by leading manufacturers in the automotive, electrical and electronics industries, among others, and meet the highest quality requirements including IP 67, IP 69, UL 94 V0, FMVSS 302, UL 746 B (RTI) and insulation classes B–F. We use state-of-the-art production processes and equipment to guarantee economical, environmentally friendly and high-quality production of our materials in compliance with DIN ISO 14001.

Website
RISSE + WILKE KALTBAND GMBH & CO. KG

Germany

Our third-generation, family-run business can look back on a success story that stretches back over 100 years. We have added to our expertise in cold rolling, which we have been building up since 1920, with the manufacture of tempered steel strips. We see ourselves as a specialist supplier of high-quality cold-rolled strips and steel strips. In addition to conventional cold-rolled strip finishes, our product range includes "Made in Germany" high-strength micro-alloyed fine-grained steels, quenched and tempered steels and spring steel strips. Our absolutely unique selling point is that, in the area of tempered steel strips with a lead-free design, we can offer a wide variety of finishes and surfaces in a range of thicknesses up to 5.50 mm. Get in touch! As a medium-sized company, we see ourselves as a partner that is continuously making improvements and is a customer-focused business on the market. Our main focus is in developing relationships based on a partnership with companies that process cold-rolled strips. In addition to our high degree of reliability, we also impress customers with our additional services, such as a high level of service, expert technical consultation for customers and scheduling flexibility. Within this, a zero-defect strategy is an integral part of our certified quality management system according to DIN EN ISO 9001 and IATF 16949. Furthermore, we are certified to ISO 14001, 45001 and 50001 standards and verified according to ISO 14064-1.

Website
SOLID SEMECS B.V.

Netherlands

Semecs, member of SERO Group, is specialized in the assembly of printed circuits boards on an industrial scale, from 5.000 to 500.000 pieces. Our products are mainly destined to the automotive, medical and industry markets. Based in the Netherlands, our company's production plant is located in Slovakia with subsidiaries in Germany and Denmark, enabling to serve our customers all around Europe. We are proud to be ISO 9001, ISO 14001 and ISO 45001 certified. Moreover, we are fully certified for PCB assembly in the Automotive market (IATF 16949) and the Medical market (ISO 13485) as well. We have also recently been rewarded with the ISO 27001 certificate. We strive to keep up with the highest quality standards, and carry out all necessary testing. We deliver a wide range of services, including product design and prototyping, manufacturing and distribution. We also deliver a comprehensive after-sales service to ensure our customers' satisfaction, which helps us to constantly improve. Our state-of-the-art production lines are organized to allow maximum flexibility. Because Semecs is member of the SERO Group, we can react quickly and ensure that your order is always arranged down to the last detail. Can you settle for PCB assembly? Or would you prefer Exceptional PCB assembly? Because there’s a world of difference between the two. If you require any further information, feel free to visit our site or contact us.

Website
KOVINOPLASTIKA LOŽ D.O.O.

Slovenia

Kovinoplastika Lož is an international company with a 70-year tradition, headquarted in Slovenia. We aim to meet our customers' demands for functional and quality products with the possibility of tailor-made components. Our "ONE-STOP SHOP" approach ensures customized solutions from research and development to final product output. Operating in compliance with internationally recognized standards, we proudly hold certifications such as ISO 9001, ISO 14001 and IATF 16949. Specializing in diverse industries, including automotive, sports, electronics, security, agriculture and construction, we are a trusted partner for manufacturing excellence. Our proficiency and cutting-edge technologies enable stellar performance across our core in-house product lines. These encompass the die casting of Zinc alloy, mechanical transformation of steel, deep drawing, toolmaking, galvanic surface treatment and assembly. Our commitment to precision and satisfaction fuel our success in diverse sectors.

Website See all products
HODA, UAB

Lithuania

HODA, UAB is a company based in Lithuania specialized in plastic injection moulding since 1993. Over the years we became one of the biggest plastic injection moulders in the Baltic states with important production capacities. Our goal is to produce high quality products and meet our customers' requirements for a competitive price. At the moment our company operates with more than 70 injection moulding machines, which gives us flexibility to produce different sizes and purpose plastic parts from a fraction of gram up to six kilograms of mass. Our wide range of services includes mould tool manufacturing, plastic injection moulding, insert overmoulding, DC (dual- component) injection moulding, gas assisted injection moulding, thermoset moulding, plastic blow moulding, decoration, tampo printing, screen printing, wet painting as well as assembly and packaging. We deliver both in Lithuania and all around the world. We are proud to be certified according to ISO9001, ISO14001, GMP and IATF 16949 standards. Moreover, we constantly improve our management system to preserve the environnement in accordance with food safety regulations. Don't hesitate to contact us for more information !

Website See all products
ALUMINIUM GIETERIJ OLDENZAAL B.V.

Netherlands

Since her founding in 1977 Aluminium Gieterij Oldenzaal (AGO) has specialized herself as a supplier of high-tech aluminium castings in sand- and permanent mould casting. In 1997 subsidiary Aluthix (ATX) was founded as a high pressure die casting and squeeze casting foundry. At this moment 70 people are employed by the both companies. AGO and ATX produce castings with the following processes: - Machine moulded sandcasting ( Seiatsu moulding system ) - Hand moulded sandcasting in organic and inorganic sand systems - Core shooting department for core package castings - Gravity die casting - Permanent mould casting - High pressure die casting - Squeeze casting AGO and ATX also offers the machining, surface treatment and assembly on her castings. With the mentioned casting processes we have all the technology within our company for producing all kinds of different types of castings. From small to large, from one of until larger series of raw or machined castings. With aid of 3D programs ( for example : Solid Works) we work closely together with our customers to find the optimal solution for their castings. Cooperation in the early stage avoids changes in design and saves time and costs. High quality casting can only be made when one has secured her quality. For ensuring our quality AGO and ATX is IATF 16949 and ISO 9001 certified. In case you are interested in our technologies, please do not hesitate and contact one of our employees.

Website See all products

ROTEX AUTOMATION EUROPE

Netherlands

Rotex is India's largest solenoid valve manufacturer and a global supplier of solenoid valves, Pulse valves, and angle seat valves.. In the last 55 years, Rotex has supplied over 9, 500, 000 valves to over 7000 customers across 73 countries from 71, 000 catalog and over 6100 customized solutions. We provide worldwide coverage with our 3 international offices in UAE, Netherlands, and Malaysia and 83 international distributors spread across over 55 countries. We offer a broad range of solenoid valves including 2-way solenoid valves, 3-way solenoid valves, 5-way solenoid valves, Low power Solenoid valves, High-Pressure Solenoid valves, Explosion Proof Solenoid valves, SIL3 rated solenoid valves, Intrinsically Safe solenoid valve etc. Rotex is also a leading manufacturer of positioners and electro-hydraulic actuators with a wide range of capabilities like smart positioners, electro-pneumatic positioners, and electro-hydraulic actuators providing torque from 25 NM to 600K NM. Founded in 1967, the company has a long history of excellence in developing highly engineered products to meet the fast-paced technological needs of the process industries. Rotex has over 18+ utilities patents over Solenoid valves and 14+ patents over electro-hydraulic actuators and positioners. It has over 11+ international Product certifications like SIL3, ATEX, UL, IECeX, INMETRO, etc, and Quality system certifications like ISO9001, ISO14001, ISO45001, AS9100D, and IATF 16949.

All the products for "iatf 16949"

Alternate fuel LPG/CNG System

Lift axle

Website See all products
MIFA ALUMINIUM B.V.

Netherlands

Mifa specialises in extrusion of magnesium and aluminium profiles. We produce fully-finished precision products with dimensional tolerances from ±0.02mm. This level of aluminium extrusion precision means unprecedented possibilities. It gives enormous freedom in design, without the restrictions of standard specifications. We extrude a comprehensive range of standard and non-standard aluminium extrusions from ø3mm to ø180mm. In addition to producing aluminium and magnesium extrusions, we supply powder coating or anodising in a wide range of colors and finishes and perform cutting, punching and CNC machining operations. For specific precision products Mifa also has other techniques in house, such as mechanical fixing, bonding, soldering, welding, hermetic sealing, application of protective foil, bending, masking and painting. We are happy to take on the responsibility for the entire process when developing and producing aluminium and magnesium components. Our aluminium profiles are used in many different industries (i.a. aerospace, automotive, suspension, defence and medical equipment) and products. We focus on companies that demand high standards for quality, precision and freedom in design. Each market sets its own specific requirements for our extruded profiles. Mifa is a AS/EN 9100 certified company for the aviation- and aerospace industry. We are also certified with IATF 16949: 2016 (Surface Treatment) as well as ISO 9001: 2015.

Website See all products
STALMA S.A.

Poland

Manufacturer and distributor of bright steel bars: drawn bars; peeled bars and ground bars. We offer products with the highest quality parameters, high accuracy of the cross-section and the maximum degree of surface finish. IATF 16949: 2016 certificate. We work with leading steel producers and our products are delivered to 28 countries in Europe. Our products are widely used in the automotive industry, machine and device construction and many others.

Website See all products
ISMET KAZCIOGLU OTOMOTIV SAN. VE TIC. LTD. STI.

Turkey

Ismet Kazcioglu Automotive Ltd. is located in Simav-Turkey and manufacturing in a closed area of over 12.500 m². Ismet Kazcioglu Automotive Ltd. is specialized in agricultural and heavy equipment steering parts (tie rod ends, axial joints and rod assembly), cold formed parts, tube and hose assembly manufacturing for local and global customers. We are awarded with IATF 16949: 2016 and ISO 9001: 2008 certification.

See all products
T.S.T. SRL

Italy

T.S.T. S.r.l. / Plastics Technologies is a structured organization with the know-how to provide "tailor-made" solutions for the customer: - Product engineering and industrialization -> Tool desig & co-design; Stress and mold flow analysis; Reverse Engineering; Production of additives. -Design of the mold and related equipment; - Rapid prototyping and metal replacement; -Construction of molds; -Tests mold and molding of thermoplastic articles; -Production in ISO 7 clean room and gray room. T.S.T. offers high-tech customized products using 1-K / 2-K and 3-K molding techniques. The company is equipped with: -13 mono-injection presses from 25 to 250 Tons, -10 bi-injection presses from 90 to 175 Tons. -3 full eletrics presses from 28 to 130 Tons. -4 assembly and testing lines. To ensure a quality product, T.S.T. is certified: UNI EN ISO 9001: 2015, IATF 16949: 2016 and UNI EN ISO 13485: 2016. It operates in the sectors: 1-Automotive: Seat belt assemblies, buckles and pretensioners, Solar and fuel sensors, Cooling pump components, Control panel and door panel escutcheons and actuators, Transmission and flow control components, others 2-Medical: Manufacture of components and groups for fluid filtration, boxes for hemodialysis and cardiac monitoring, Components for cardiac surgery, Valves and fluid control components, others 3-Industrial: electronic parts, household appliances and household appliances, others.

See all products
KUTES METAL

Turkey

KUTES Metal supplies high quality nodular and gray iron castings, with an annual production capacity of 50, 000 tons per year - 16 tons per hour melting, across its two moulding lines in Corlu, Tekirdag/Turkey. (2 hour drive from both Istanbul and the border to the European Union). KUTES Metal offers also top tier Machining solutions, through its Horizental and vertical CNC centers. KUTES is committed to supply high-quality products and solutions to its customers, answering needs of various sectors, with global shipping capabilities. KUTES has been providing serial & tailormade solutions for various sectors, such as Hydraulic Equipment, Industrial Pumps & Valves, Air Conditioning, Automotive, Agriculture, Construction, Railway and Industrial Machinery industries. For KUTES Metal, quality comes first. We are always ensuring compliance to the following certifications : 1. IATF 16949: 2016 Automotive Quality Management Systems 2. ISO 9001: 2015 Quality Management Systems 3. 14001: 2015 Environmental Management Systems 4. OHSAS TS 18001: 2007 Occupational Health and Safety Management Systems 5. AD 2000 MERKBLATT WO/ TRD 100 6. PED 97/23/ EC (Pressure Equipment Directives) 7. DEUTSCHE BAHN AG QUALIFICATION (German Railways Certification) 8. Lloyd’s Register

See all products
LEAX DETMOLD GMBH

Germany

LEAX Detmold – your professional and experienced partner in gear and gearbox production since 1945, initially operated under the company name Gebr. Brinkmann. Since 2013, the company's creativity and innovative power have been even more impressive thanks to the merger with the Swedish LEAX Group. At the Detmold site, LEAX Detmold fulfils your special demands and requirements with its approx. 125 employees. We support you in the implementation of your gear and gearbox projects from design to series production. We are certified according to DIN EN ISO 9001: 2015, ISO 14001 and IATF 16949: 2016.

See all products
TRIBO LLC

Ukraine

Tribo is a steadily growing group of companies, founded in 1979. Today we are the largest manufacturer of friction products in the Eastern Europe. Tribo produces more than 800 different products for such industrial groups as railway transport, commercial vehicles, agricultural, industrial and special equipment. Tribo has its own world class testing lab. During the tests on dynamometer we simulate various technical and weather conditions at speeds up to 320 km/h! Tribo is a reliable supplier to the markets of Europe, Asia and Africa. We are certified according to ECE R90, ISO 9001, ISO 14001, IATF 16949, ISO 17025, TP TC and others. Currently we supply Bombardier, GTR, Belaz, Maz and others.

See all products
CETA TESTSYSTEME GMBH

Germany

CETA Testsysteme GmbH Solution Partner for industrial Leak Testing and Flow Measurement CETA Testsysteme GmbH develops and manufactures leak tester and flow test devices (Made in Germany) and has more than 30 years of experience in solving industrial inspection tasks. The test media used are compressed air and hydrogen. The customers use the test equipment for quality assurance and production assurance in the production line. The wide range of services includes consulting, feasibility analysis, putting into operation, training, maintenance and calibration. CETA is certified according to DIN ISO 9001 and won the Quality Award North-Rhine-Westphalia in 2002 in the industry division. Since 2012, CETA has consistently been awarded a very good credit rating. Since 2004, the calibration laboratory (D-K-19566) has been accredited according to DIN EN ISO / IEC 17025 for the measurand pressure. The internationally recognized DAkkS calibration certificate complies with the requirements of the IATF 16949 standard valid in the automotive industry. With cooperation partners in currently 14 countries as well as several thousands of test equipment used worldwide, CETA presents itself as a competent solution partner for industrial leak and flow testing. For further information visit www.cetatest.com

See all products
NIVEX P+P KFT.

Hungary

NIVEX P+P Ltd. established in 1986 is a 100% Hungarian privately owned company manufacturing custom-made injection moulded technical rubber parts and injection moulds. Products: seals, lip seals, O-rings, grommets, cable bushings, boots, bellows, shock absorber rubber parts, membranes, closing covers, rubber-metal bonded parts and other moulded rubber parts used in different industrial applications, such automotive, industrial machinery, construction industry, hydraulic and pneumatic equipment. We have an in-house toolshop capable of producing the necessary production moulds. Machine fleet consists of up-to-date injection moulding machines different clamping forces, pre-production and finishing machines necessary for production as well as cryogenic deburring machine.Raw material: according to customer specifications any type of NR, SBR, EPDM, CR, NBR, AEM, ACM, VMQ, FKM rubber compounds can be processed. Raw material is purchased from reliable, certified Hungarian and European suppliers.NIVEX P+P Ltd. has ISO 9001: 2015 and IATF 16949 certifications.

See all products