high-frequency probe

...etc.) are not permitted or are difficult to implement. Integrated maintenance-free electronics and a high DC output signal ensure simple and hassle-free handling. Output voltage depending on the displacement with the electrical load as a parameter. Sensors of the series 87350 essentially consist of an oscillator, a demodulator, and a transformer with a movable core. They are powered by DC...

...To check fill levels in fuel tanks, batteries, or tank systems, various measurement systems are used. One option is measuring with ultrasound. In this method, the measurement of signals occurs through frequency and resonance, usually with a metal probe. However, for certain applications, special media resistance is required, such as against battery acid. Our heat- and corrosion-resistant plastic...

...The tuning fork is excited piezoelectrically at its mechanical resonance frequency. When the probe is covered by bulk material, the resulting damping is electronically registered, and a corresponding switch output is activated. International approvals enable use in areas at risk of gas and dust explosions. • Limit switch for very light and pneumatically conveyed bulk materials • Very high...

... second:Limited only by Z scanner resonance frequency Operational Modes:Self-exciting oscillation, constant amplitude, constant excitation Measurement Resolution:0,3 Hz at 10 kHz BW; 0,02 Hz at 600 Hz BW Demodulation Bandwidth:500 kHz Digital Phase Shifter:0 – 360˚ (20 bit); 0,34 millidegree step Spectrum Analysis:Amplitude, Phase Probe Safety:Yes Output Modulation:p-p 10V with 0,15 mV resolution Input Signal:10 kHz - 1 MHz; 70 mV - 10 V PC Interface:USB 2.0, Ethernet Program SDK:LabView Power Supply:100-240 V (50/60 Hz)...

...ELECTROMAGNETIC PUMP WITH PROPORTIONAL FLOW mA SIGNAL PVC Head Ceramic Ball Valve with high chemical compatibility PTFE Membrane compatible with almost all chemicals Power Supply 230 VAC 50/60 Hz Wall mounting with mounting plate (included) Manual purge valve Manual flow adjustment from 0 to 100% Pre-Equipment for Low Product Level Probe. Proportional flow adjustment based on an external analog signal (4-20 mA) LED operating indicator Model: HYDRA HY.MA Proportional mA signal Flow: 5 l/h (3 l/h) Pressure: 8 bar (10 bar) Connections: 4/6 mm Frequency: 160 Power Supply: 100 to 240 Vac 50/60 Hz...

...A quality product, designed in Germany. The machine is delivered complete with its accessories. Designed to level and compact soils, paving stones, and macadam, it is equipped with a powerful engine for intensive use on road construction or gardening sites. Highlights: - High vibration frequency, - Very good efficiency for compaction, - Simplified operation with automated advancement, - Quiet...

... installation and connection to the pneumatic valve. - Pneumatic inlet valve for the tank controlled by the high and low levels of the tank. - Electro-pneumatic management box with functions: • On – Off (pump or heat source control) • Production or cleaning Option: Level regulation via frequency inverter with front potentiometer. Controlled pump powers: 1.5, 2.2, or 4 KW. Semi-automatic or automatic systems allowing continuous liquid management between, depending on the case, a filtration pallet or a pasteurizer and the filling machine. Equipment complies with the Machinery Directive 97/23/EC.

... reduced. This in turn would affect the measurement. During tank filling can by throttling the power of the pump a overfilling be avoided so that the full capacity of a tank can be exploited. The level measurement in combination with the flow measurement complement each other ideally, if the measured information are processed together and evaluated. The plant availability is held high, because in case of failure or maintenance of a measurement, the other still works. Energy optimized, high-frequency electromagnetic impulses, generated by the electronics, are propagated along the probe (single rod..

... nephelometric method in accordance with EN ISO 7027, while the ViSolid probe measures solid matter through backscattered light. The AutoRange function selects the optimal resolution for the measured value within the probes' measurement range: VisoTurb: 0 – 4000 FNU or 0.01 – 3 g/l TSS ViSolid: 0.01 – 20 g/l TSS Integrated, permanent, and wear-free cleaning system The ultrasound source integrated into the probe generates high-frequency vibrations of the optical window in the micrometer range. The maximum vibrations are located at the center of...

...The DVS requires the inspection of weld seams, the materials used, and various processing procedures as part of the proper handling of plastics. For non-destructive testing of plastic welds in container and apparatus construction, spark testing devices are the fastest, simplest, and most cost-effective option. These spark testing devices operate on the basis of high-frequency alternating...

... out of range the pump will go off and start again when it drops below 95% of the range. The graphic display is easy to read. At night or in dark places in the plant a backlight can be switched on. Consumables such as sensor, filter or sampling probe can easily be replaced without tools. Field test results – the high range version The first tests in plants have proven that an ultra-low measuring...

... principle of high-frequency capacitance. These measurement systems are used worldwide, especially in bulk materials. In the application for measuring sand moisture, the Material Research and Testing Institute at BAUHAUS-UNIVERSITÄT WEIMAR (MFPA Weimar) confirms in its test report No. B81/1666-03 (dated 15.12.2003) an almost linear probe measurement signal related to sand moisture. One of the latest...

... chemical processes and semi-finished products for the printed circuit board sector (Atotech, Panasonic, Sun Chemicals, Union Tool, ...). These suppliers not only provide their high-end products but also monitor the quality of the circuits produced, intervening when necessary to improve the production process. The flagship product is, of course, the multilayer board, but one of the reasons for its success is the extensive range, which includes IMS (Insulated Metal Substrate) printed circuits, traditional single and double-layer boards, SMD steel laminates, and high-frequency circuits.

... by COFRAC in electricity/magnetism, time/frequency, and temperature, SOFIMAE is a service provider whose main mission is to offer comprehensive, reliable, and high-quality support and service to teams responsible for managing their company's metrology.