heat recovery devices

... to avoid turbulence within the units. The THRV series heat recovery units feature a compact structure while maintaining low air flow velocities. This design results in low pressure drops and ensures high efficiency. Additionally, if any condensation occurs during the operation of the heat recovery units, the THRV series is equipped with a standard drain outlet.

...Air purification and heat recovery systems for emissions from coating in the Lithium battery sector: 1. Laboratory lines: Systems can also be designed to treat emissions from both cathode and anode coating using the same system. 2. Pilot plant lines: The volumes of air treated are lower than those handled by production lines. The purpose of the emission treatment system from cathode coating is to...

... extremely low operating noise make this heat recovery unit a recommended solution for nonstop operation. The heat recovery unit has three speed levels to choose from, depending on the size of the area and indoor demands. HRUWALL10025 provides a sufficient air change level in areas up to 19m2. HRUWALL15060 provides a sufficient air change level in areas up to 45m2. We recommend installing the devices in pairs.

... functionality and efficiency of a ventilation system, the tightness of the installed ventilation ducts is a crucial requirement. Leaks in the duct network prevent targeted air distribution within the building, resulting in the planned good air quality not being achieved. The efficiency, especially of ventilation systems with heat recovery, deteriorates due to leaky ventilation ducts. The Micro Leakage Meter (MLM) can reliably locate leaks in the duct networks of ventilation systems and eliminate them as part of quality assurance.

...Coaxial Evaporator (Coaxial Heat Exchanger) Schmöle. VS 2-6 E, 7.8 kW, 1.2 m³/h Application Area: Coaxial condensers from Schmöle are used in heat pumps, refrigeration and air conditioning systems, heat recovery systems, climate cabinets, and temperature control devices for cooling and condensing refrigerants. Advantages - High specific evaporator performance due to the use of high-performance...

...Poor air quality in industrial production areas is a thing of the past. Our experienced ventilation specialists are capable of solving your ventilation-related issues. The range includes everything from simple exhaust and supply devices to exhaust-supply combination units, as well as high-performance devices with integrated heat recovery systems. Units for humidification or dehumidification are...

... focus on optimization to ensure maximum energy recovery - Comprehensive service of delivered devices guaranteeing durability and reliability of the installation's operation. "Utilization of Industrial Waste Steam" In Europe, it is common practice to release waste steam or smoke directly into the atmosphere. This applies to various areas of the manufacturing and processing industry utilizing...

...For the safe disposal of heavily contaminated, i.e., halogenated, exhaust streams as well as liquid waste and wastewater, particularly in the pharmaceutical, chemical, and petrochemical industries. CTP's MultiTherm is a combined process. It essentially consists of thermal oxidation and one or more upstream or downstream processes tailored to the application. These could include, among others, heat recovery, wet scrubbing, and DeNOx. Our burner system has successfully mastered the simultaneous combustion of many highly variable waste streams.

... associated air exchange, relative humidity, heat, and odors in the production hall are reduced. Alternatively, the cleaned exhaust air can be fed into a room air conditioning system (RLT system) with heat recovery. A heat exchanger can effectively recover the heat contained in the exhaust air stream, thereby preheating the outside air. Room air conditioning systems also enable the conditioning of the hall air. AFS central systems should always be viewed as a holistic approach.

...Our heat exchanger construction concept is based on three fundamental pillars that ensure optimal efficiency and ease of maintenance. First, our approach guarantees complete recovery of the background effects related to the pressurization of the device. This essential feature ensures increased safety and stable performance throughout the entire lifespan of the exchanger. Secondly, our system...

... circulation, the high-performance heat recovery system can continuously extract moisture from the ambient air to dry it quickly. In this way, a single TTK 355 S can remove up to 70 liters of water from the ambient air daily. The premium hot gas automatic defrosting of the TTK 355 S ensures much more efficient dehumidification without downtime compared to other existing devices, as it allows for continued dehumidification during the defrosting process. Technology: unspecified Mobility: mobile Refrigerant: air Other features: construction site...

... recovery unit - dual flow unit - air cooler - destratifier - energy savings Moreover, the latest advancements in equipment allow for significant energy savings. Your AWITECH contact will be able to advise you in this process.

...Outdoor/Exhaust air horizontal. The connections (Ø 125 mm) are located at the back of the unit. Control: Airlinq L The DUPLEX Vent 150 is a decentralized comfort ventilation unit with high heat recovery and is standardly equipped with a bypass damper. This extremely quiet unit produces a sound level of <= 35 dB(A) at nominal power. At 80% power, the sound level is <= 30 dB(A).

...The EHC20 is an intelligent controller for your exodraft solution for heat recovery. When the temperature on the water side exceeds the desired level, the EHC20 opens the bypass damper in the heat recovery unit and directs the flue gas/steam directly into the chimney. This prevents overheating and ensures safe operation. The EHC20 also controls a 3-way mixing valve, which ensures that...

... inserts. The smoke and dust generated in the workshop are captured and filtered. The clean exhaust air can be discharged outside. To enhance energy efficiency, these systems can be equipped with heat recovery, significantly reducing heating costs in winter.

...Consistent System Technology: In combination with our modular boiler house components, you will receive an energy-optimized system tailored to your needs. Various facilities for heat recovery, water treatment modules, condensate systems, and additional system accessories are available. This simplifies planning and installation, enabling reliable and efficient boiler operation. Intelligent...

...to comply with the MAK values in the workplace or to remove solvents during the evaporation process within the workshop. The exhaust systems will be equipped with heat recovery if necessary.

... steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser...

... modular assembly system provides extensive power selection options and the ability to integrate a wide range of useful solutions such as a built-in hydraulic module, additional water storage tanks, free cooling or heat recovery options. CW chillers can be made with two to five circuits to ensure continuous system operation in case of emergency – if one circuit is damaged, the others can still use the remaining unit capacity to service the end user. Refra manufactures modern devices using plug-and-play ideology, making the installation and use of the devices as easy as possible.

...By conditioning outside air through filtering, heating, cooling, humidifying, heat recovery, or a combination of these methods according to your requirements, the indoor climate is optimized. In cooperation with various equipment manufacturers (Wolf, Pichler, ...), we provide you with a comprehensive range of devices for heating, ventilation, cooling, and heat recovery in commercial and...

...Oil / emulsion mist filter systems and devices for exhaust and recirculation operation. Fresh air and heat recovery. Complete machine cleaning: oil and chip vacuums, dust collectors, extraction booths, and more.

... liquids of the same nature as the extracted fluid - Recovery of condensed vapors in the separator tank and discharge under pressure without an extraction pump - Exceptional reliability (the devices in contact with the process are static). - Compact unit with a small footprint, delivered ready to connect Options (dashed lines in the principle diagram) - Steam ejector on the suction for achieving a...

... CONSORB, the DST FLEXISORB can cater to all applications in any possible environment. Its great flexibility and efficiency provide extreme satisfaction to its users. RECUSORB Dehumidification Principle This principle operates with internal heat recovery. Heat is absorbed in the regeneration section of the wheel and then recovered in the purge area, where the incoming air is reheated and partially loses its humidity. Energy consumption decreases and the air...

...The KCX recovery unit is designed for ventilation with heat recovery. This product was created with the comfort of air and energy savings in mind. The properties of the KCX are most effectively utilized in rooms with high thermal energy emissions, where good ventilation is also required. The unit, equipped with high-quality components and advanced technology, guarantees a reduction in operating...

...ENERGY-EFFICIENT DEHUMIDIFICATION WITH HIGH COMFORT Quiet and powerful, with high energy efficiency By using dehumidification with heat recovery, you achieve maximum energy savings. This significantly reduces the operating costs for your swimming pool. SET offers an innovative product range to protect against moisture damage, which can be individually tailored to each swimming pool. Chest...

...We offer decentralized ventilation systems for old buildings, renovations, and new constructions. Fresh air & energy efficiency guaranteed! We provide decentralized ventilation systems with and without heat recovery. The units can be used for individual rooms or entire apartments in single-family and multi-family homes, as well as commercial properties. With up to 91%, some of the units have heat recovery similar to central ventilation systems. These devices are suitable for renovations as well as new constructions.

... 1000 kW of heating and cooling power. The turnkey solutions are designed in-house and integrated with other renewable sources, such as photovoltaics, heat recovery devices, exhaust filters, and heat exchangers. Top quality and service!

... their sustainability goals and to provide them with environmentally friendly products of the expected quality. The product portfolio includes the following products: - Thin aluminum strips with a thickness of 0.030-0.300 mm, in widths up to 2,050 mm. - Packaging systems from handheld devices to complete packaging lines. - Aluminum recycling (collection, return, recovery). - Semi-flexible, fully flexible, and highly flexible pipes and hoses made of aluminum, plastic fabric, and composite materials. - Steel and stainless steel.

... of your devices. ROTOTEAM reliably supplies you with spare parts for your heat recovery, ventilation, and drying systems, even with up to 5 years warranty if you wish. To maintain the air quality of your RLT system, you should have an annual hygiene cleaning and maintenance performed on your ventilation system. Our staff is officially trained according to VDI 6022 "Indoor Air Technology, Indoor...

... them. Design and manufacture of devices, containers, pressure vessels, heat exchangers, columns, assemblies, etc. for the chemical and pharmaceutical industry, as well as for bio, food, and environmental technology. Engineering and construction of batch cooking systems for the production of fruit bases, jams, compotes, marmalades, sauces, vegetables, and other food products. Engineering of systems for heat recovery from wastewater systems, as well as the manufacture and installation of channel heat exchangers for various channel shapes.