guide cylinders

...Guide units for attaching cylinders according to ISO 6432 and VDMA 15552. For moving heavy loads with high speed and positioning accuracy.

... pressure before the end stroke of the cylinder or if the guide undergoes an external force offcentered with respect to the axis of the guide, the generated twist can cause a matting of the housing of the rod in the plate if it is aluminum, especially if the penetration of the rod is low (as on the Classic series). This range is available on the Classic, Strengthened and Heavy series for Ø50 to Ø125 cylinders. ...

...1,600 mm, shell: 1,050 mm Item No. 0554LP | GUIDE POST WITH PLASTIC TUBE FOR STIFFENING Open at the bottom Height: 1,600 mm, tube: 1,000 mm Item No. 0555LP | GUIDE POST WITH PLASTIC PROFILE FOR STIFFENING Open at the bottom Height: 1,600 mm, profile: 1,000 mm...

...Double-acting with guide rods, magnetic version for contactless sensing ø 20, 25, 32, 40, 50, 63 mm The compact guide units series QCT + QCB are designed for tight installation conditions and twist-proof applications. Two versions are available, with guide bushings and with ball guides. The version with simple bushings is suitable for high transverse forces. This type of load can be twice as...

...Doubleacting pneumatic cylinder acc. to DIN ISO 6432. Piston rod with external thread, position detection for proximity switch and flexible damping on both sides. Reference:12002 Cylinder tube:stainless steel 1.4301 Endcap:aluminium Piston rod:stainless steel 1.4305 Piston and piston rod seal:polyurethane, NBR Cylinder piston:brass Piston rod guide bush:sintered bronze Operating principle:double...

...REWINDING – SLITTING – LAMINATING – FOLDING – GLUING – EMBOSSING Compatible with the leading machine brands (BOBST MARTIN*, DENDAZOLLI*, EMBA*, CARTEC*, DCM*, TEXO*, JURINE*, CUIR*, WARD*, ASITRADE*, FOSBER*, ALLIMAND*, …) • Feeder cylinder, gluing cylinder • Drive roller, guide roller • Half-part: easy disassembly • Folder roller...

...-treatment, Nitriding treatment, Electroplated hard-chrome finish, High-frequency quenching, Spray coating bimetallic-alloy, Vacuum quenching. Customer’s specification and drawing are accepted in the manufacturing various materials of pillars, columns, tie bars, guide rods which applicable to various plastic, rubber injection molding machine, hydraulic machine, diverse machine tool etc. (Special dimension and spec. are also acceptable. ) ...

...66 single-acting models. Stroke from 40 to 220 mm. Built-in spring return. Remote operation via hand pump or motor. Smooth hard chrome piston or safety nut piston. Guide and stop ring with wiper seal. Flat or oscillating piston head, threaded and removable. Threaded mounting holes in the base. Oil inlet 3/8 NPT female. Threaded cylinder head. Quick couplers with attached protective caps. Universal cylinders recommended for lifting and pushing operations. In the 'S' version, all cylinders are equipped with a safety nut for tasks requiring prolonged load retention.

...The aluminum profile 90 x 135 is suitable for heavy constructions of all kinds, particularly for the linear guide LB as a carriage. The profile is also designed to accommodate counterweights and hydraulic cylinders. Material: Aluminum, extruded, anodized E6/EV1 Ix: 286.480 cm4 Iy: 631.058 cm4 wx: 63.662 cm3 wy: 93.490 cm3 Weight: 8.992 kg/m Length: 6 m Packaging unit: 6 m...

...Linear guide cylinders from the CL-H and Tensor-H series are used wherever precise linear movements are required in the industrial sector. The linear unit is completely encapsulated, thus protecting it from contamination. Five standard lengths with strokes of 150, 300, 500, 750, and 1000 mm allow for use in various applications. With the CL-H and Tensor-H versions, you can choose between the fully electronically controlled precision version and the classic drive technology.

At the European level and for the industry in general, SEYAME is a manufacturing plant: - of seamless and welded stainless steel tubes re-drawn in straight lengths or coils, - of hydraulic tubes, - of cylinder tubes, - of exchanger tubes, - of pressure tubes, - of precision tubes, - of tubes for the automotive industry. It is also a manufacturing plant for tube cutting machines. For France and ...

...Where to buy nitrous oxide cylinders? What is N2O? Let’s briefly clarify all your doubts! Nitrous Oxide Cylinders – Where to Buy When talking about nitrous oxide cylinders, we must discuss their main component, N2O. What is N2O and where can you buy it? Don’t miss the following guide where we explain what these cylinders are and where to purchase them at the best price. What are nitrous oxide...

...We rectify and chrome all industrial parts, offering a complete service for regenerations, especially for rollers/cylinders/calenders.

... P+S product range with Vulkollan coating stands out in this market segment due to its high dynamic load capacity, combined with ideal compression set behavior and an excellent modulus of elasticity. It is complemented by a variety of applications with Diepothan coverings. These allow us to offer a wide range of applications in a hardness range of approximately 40 – 98° Shore A. Wheels, rollers, and cylinders can be manufactured according to individual customer specifications and delivered as a complete ready-to-install assembly.

...Space-saving electric mini slide table actuators from IAI are used as positioning systems in many manufacturing companies. They are suitable for lifting, lowering, pressing and clamping workpieces as well as for horizontal movements and many other assembly devices. The mini slide table types are available in narrow, wide or flat design. The built-in guide eliminates the need for an external one, which saves assembly space. The latest developments are the miniature slide table types of the RCA2 series with 24V servo motor or the RCS2 series with 230V servo motor.

...The DB14 DESKLINE® integrated actuator sets new standards for integrated actuators with a linear motor. The DB14 actuator is specifically designed for integration into a three-part guide, offering complete design freedom for various office applications. Its compact design meets market demands for a small footprint while also providing a significant stroke length. Additionally, this compactness...

...Cylindrical guide cleaners are used to remove dirt, external particles, chips, and moisture from shafts, tailstocks of lathes, hydraulic and pneumatic cylinders. Scuder manufactures two models: - Cylindrical guide cleaner AB profiles - Cylindrical guide cleaner series LC-A...

...The TQ table frame is ideally suited for assembly workstations made from aluminum profiles and as a base for multi-legged conveyor systems. The mounting grooves (width 8 mm) allow for the attachment of crossbars, intermediate shelves, and additional structures along the entire length of the legs. The TQ leg is made from a colorless anodized aluminum extrusion profile. The guide tube is supported in sliding bushings and the lifting movement is carried out via hydraulic cylinders.

... in Montsoult (95560) A qualified locksmith in Montsoult (95560) offers a variety of services to address your security needs. Among the most common services are lock installation, repair of damaged locks, key duplication, installation of locks and cylinders, and door unlocking. The Benefits of Hiring a Locksmith in Montsoult (95560) It is essential to hire a competent locksmith in Montsoult (95560) to ensure security.

... users, such as: • cylinders • hydraulic motors • valves • accumulators Choosing the right model of hydraulic pump starts with a proper analysis of the final application of this component. Customized consulting for every type of hydraulic system RVS in Turin has the right experience to guide you in selecting the most suitable items for your needs and, thanks to its internal warehouse, is able to provide most pumps for immediate delivery.

...The production program includes rollers and roller systems along with the associated roller service and management. • Rollers and roller systems • Cylinders, drying cylinders as steel welded constructions • Drums • Tambours • Guide rollers • Double mantle rollers As complete systems with • Bearings • Stands • Pulleys • Couplings, etc. • Dimensions • Maximum length 15,000 mm • Maximum diameter...

... stages can be found in the table on page 01-29. A salt-nitriding treatment of the stroke stages allows for the omission of bronze bearings or guide rings, as the sliding surfaces are highly wear-resistant. In particular, a high surface hardness of HV -5/12 (500-550) is achieved. This provides mechanical durability that exceeds the standard commercial level. Furthermore, high wear resistance is ensured. All these advantages enable the operation of the cylinder at the end stroke under maximum pressure.

...Profile cylinder ISO 15552, round cylinder ISO 6432, short stroke, compact, and guide cylinders...

...Looking to enhance the security of your home or business in Valenton? The locksmiths at Les Bons Artisans are here to advise and assist you in implementing solutions tailored to your needs. One of the primary missions of our locksmiths is the installation of secure locks. Whether it’s multi-point locks, high-security cylinders, or additional protective bolts, our experts will guide you towards...

...Steel guide support (sold in pairs) DIN standardized for dowel compatible with ISO 15552 cylinders With bronze friction ring Bore diameter 40-50 mm...

...– Asymmetrical bending machine with 3 smooth guide rollers for bending tubes, flat bars, and profiles – Standardized electro-welded steel structure, well-machined – Adjustable lateral straightening rollers in one direction – Manual movements of the straighteners – Independent adjustment of bending rollers via hydraulic cylinders operated by push buttons – Position of the rollers displayed on...

...ORTS GmbH designs and manufactures electro-hydraulic grippers in every size and shape. In electro-hydraulic grippers, an electric motor drives the hydraulic pump, which supplies the cylinders with pressure for opening and closing. For this, electro-hydraulic grippers require a power supply via a cable. Typically, this is routed through the crane boom with guide rollers and a deflection pulley to the gripper. Germany: Germany...

... reference KDI1903M Aspiration type Atmospheric Number of cylinders 3 Cylinder arrangement L Displacement (L) 1.86 Bore (mm) 88 Stroke (mm) 102 Compression ratio 18.5 : 1 Speed (RPM) 1500 Piston speed (m/s) 5.10 Power ESP (kW) 19 Regulation class (%) +/- 2.5% BMEP (bar) 7.52 Regulation type Mechanical Exhaust gas temperature @ ESP 50Hz (°C) 520 Exhaust gas flow @ ESP 50Hz (L/s) 59 Exhaust back...

...ISO cylinders, 6431, 15552, 6432, 21287, telescopic, compact, short-stroke, rotary cylinders, rodless cylinders, guide units, stop cylinders, stainless steel, aluminum, oil brake cylinders The Rv6000 series includes a wide range of pneumatic cylinders according to DIN / ISO 6431 and DIN / ISO 6432. Additionally, short-stroke cylinders, guided short-stroke cylinders, as well as linear guides for...

...Control valves, seat valves Cylinders, slides, guide units Valve islands, bus systems Air preparations, accessories...