high temperature alloy Germany

... austenitic steels like 1.4404 (F316L) and titanium-stabilized steels like 1.4571 (F316Ti). Additionally, nickel-based and superalloys for high-temperature applications such as: Monel®: 2.4360 – Alloy 400 Hastelloy®: 2.4617 - Alloy B-2 Incoloy® and Inconel® steel groups: 2.4858 – Alloy 825 and 2.4856 - Alloy 625, 2.4816 - Alloy 600 Monel®, Incoloy®, Inconel®, Hastelloy® are registered trademarks...

...The base of the metallic matrix is iron powder with the addition of nickel, copper, and molybdenum to enhance high-temperature and scale resistance. Additionally, a solid lubricant (99.9% high-purity, chemically neutral electro-graphite) is incorporated, which is stored under preload in a micro-fine distribution. This alloy enables a rapid, self-lubricating function through the formation of a...

...Spheroidal graphite cast iron exhibits an extraordinarily high ductility. Moreover, it possesses an extremely high strength, which is sometimes greater than that of forged and cast steel components at identical elongation values. An additional advantage of the material: By further alloying, wear resistance and temperature and corrosion resistance can be enhanced even more. Here too, the reason...

... and covers the flow range from 0.19 ml/min to 1152 ml/min. The mzr-11508 is suitable for continuous delivery and discrete dosage of low and high viscosity liquids. It achieves high differential pressures and provides a low pulsation flow. Its robustness and the available accessories make it suitable for challenging applications. Advantages High dosage precision precision CV < 1% at low volumes Long...

... high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads. Product number:1673241 Container size:20 Product group:Industry...

... Rolling element:100Cr6 Worm wheel:Wear-resistant bronze alloy Worm shaft:CK45N hardened and grinded Operating temperature:-10 °C to +80 °C Rotational speed:Max. 100 min-1 Mounting position:Any, preferably horizontal Lubricant:With bearing grease via grease nipples Options:Inductive proximity switch, flange/coupling to mount the motor, motorization...

...STOL®95 is a CuCrZr alloy with a combination of very high electrical conductivity and good relaxation resistance, even at an operating temperature of 250°C. This alloy is very suitable for components with medium strength requirements. It is used particularly in applications in the field of mobile devices, as a heat sink, and for highcurrent contacts, for example in hybrid vehicles or photovoltaic technology.

...please visit the product page on our website! Support material/Carrier material:Steel (also available as bronze GAP-MET®/B or stainless steel GAP-MET®/N) Intermediate layer:CuSn alloy Sliding layer:Graphit film Static load:≤ 260 N/mm² Dynamic load:≤ 80 N/mm² Sliding speed:≤ 0,5 m/s Friction value:0,10 up to 0,20 µ Temperature strain:-150 up to +280 °C Max. PV-value:1,0 N/mm² x m/s Housing Ø:H7 Bushing inner ø after mounting:H8 / H9 Shaft tolerance:To be specified by the client...

...Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits...

...Proper formatting is essential for quality assurance when welding high-alloy, corrosion-resistant components. The Oxy EVO can be connected to our orbital controls for monitoring and documenting the residual oxygen content. — User-friendly menu navigation — Suitable for inert gases and gases with H2 content (max. 10%) — Measurement cell made of zirconium oxide (maintenance-free) — 3.5" color...

... alloyed materials are used where the highest demands for corrosion resistance and/or high-temperature strength are required. Thus, we offer a wide range of application-specific alloys for various industries and markets. The comparable cast alloys of these forged alloys are rarely standardized. Corrosion-resistant nickel cast alloys are standardized in the American regulations, while there are no national specifications for heat-resistant nickel cast alloys. Therefore, in our...

...High-temperature flat grippers provide above-average holding forces up to a temperature of 450°C. Benefits: Usable up to 450°C without permanent loss of holding force due to the use of an AlNiCo alloy. Applicable in painting or powder coating systems, for cutting torches, hot cast parts, or in drying ovens. Quick and secure installation through the gripping surface via a hole with a conical countersink. Product features to your advantage: Increased holding force through a steel cap and ground gripping surface. Shielded system. For fastening: brass screws / steel screws.

... bronzes - Copper-nickel alloys - Special alloys bercoweld® solder wire and welding wire offers significant advantages. The automotive industry has impressively demonstrated how joining galvanized sheets with copper wire can be achieved without extensive reworking. Here, so-called Tailored Blanks, custom-made components from thin sheets of varying qualities, are laser, hard, or high-temperature soldered with bercoweld®. Subsequent treatments and the galvanizing of the joint seam are eliminated, while corrosion protection remains intact.

...No auxiliary power required for switching electrical loads Robust switch housing made of aluminum alloy, IP66, NEMA 4X Adjustment ranges from -30 … +70 °C to 0 … 600 °C 1 or 2 independent set points, SPDT or DPDT, high switching capacity up to AC 250 V, 20 A Installation with remote connection ≤ 10 m...

...Release agent concentrate for structural parts and natural ductile alloys - Tried and tested release agent, which is qualified for glueing and welding of structural castings Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • ideally suitable for conventional as well as micro-/minimal spraying • approved for glueing, welding, painting and powder coating • no build-up • die wetting already at lower temperatures...

...Magnetic Stirrer with Heating Cost-effective magnetic stirrer with heating in an innovative design. Equipped with a socket according to DIN 12878 for connecting an electronic contact thermometer, e.g., ETS-D5. This allows for highly accurate temperature control directly in the medium. A high heating power of 600 watts and a heating plate made of a stainless steel-copper alloy ensure quick...

...Plate heat exchanger, operating pressure in both circuits is 30 bar. It consists of stamped plates made of stainless steel, which are soldered with a copper alloy in a vacuum process. Plate heat exchanger, compact and lightweight unit, high heat exchange coefficient thanks to the special shape of the plates, high operating temperature and pressure, and high corrosion resistance, as the plates are made of stainless steel.

...Klüberpaste HEL 46-450 | 750 g Can Hot screw paste made from fully synthetic base oils, polyalkylene glycol and ester, as well as an inorganic solid lubricant combination. Color: black Temperature range: -40 °C to 1000 °C Application area: high-alloy steels At temperatures above 200 °C - transition of the lubricant film to a dry lubrication Good water resistance and good corrosion protection below 200 °C g:750...

...The strength and toughness or the hardness of the treated workpieces are increased. Suitable for all hardenable steels and alloy steels with high proportions of alloying elements. The protective gas hardening combines the heat treatment processes of hardening and tempering in the high temperature range. In the first processing step of hardening, the workpieces are brought to the austenitizing...

...HIGH REMANENCE AND TEMPERATURE RESISTANCE AINiCo magnets are an alloy of aluminum, nickel, cobalt, iron, copper, and titanium. The production of these permanent magnets is done through casting or sintering. They are preferentially oriented in the axial direction and can only be magnetized in this direction.

... engineering, chemistry, petrochemistry, mechanical engineering, vehicle and shipbuilding, oil & gas, and constructions. In particular, we possess extensive know-how and a tailored product portfolio in the area of (high) pressure pipelines. You will also find suitable pipes for use in low-temperature applications with us. In addition to boiler tubes, we are happy to assist with threaded pipes, MBS...

...The hardening of unalloyed and high-alloy tool steels is carried out in our vacuum furnace at a maximum hardening temperature of 1250 °C. Through this heat treatment, the steels achieve maximum values of hardness and strength with minimal distortion and a clean surface. This process is particularly suitable for cutting, punching tools, dies, and molds.

...Thermochemical heat treatment at low treatment temperatures for high dimensional accuracy for all steels Nitriding is classified as a thermochemical heat treatment and is used to enhance the corrosion resistance and hardness of steels. For this process, the material is first heated, and once the desired treatment temperature is reached, nitrogen is introduced. This nitrogen diffuses into the...

... influences. The remanence of SmCo magnets ranges, depending on the alloy, from approximately 0.40 Tesla to 0.80 Tesla. This is about half as high as that of NdFeB magnets. However, the coercive field strength is about 400 - 880 kA/m, which is roughly a factor of 3 lower than that of NdFeB magnets. SmCo magnets have a low (negative) temperature coefficient and can be used at temperatures up to +250°C.

...Explosion-Proof Flange Heaters for Areas with Special EX/ATEX Protection Requirements For smooth operation, choosing the correct materials regarding medium, temperature range, and operating pressure is of great importance. We have in stock the usual stainless and acid-resistant steel grades, as well as a wide selection of high-alloy steels for aggressive media and high temperatures. All...

...Metallic alloy magnets made from aluminum, nickel, cobalt, as well as iron, copper, and titanium. They are produced through sand casting, die casting, vacuum precision casting, and sintering. AlNiCo is the oldest magnetic material still in use today. AlNiCo magnets have a low coercive field strength combined with high remanence—therefore, they need to have a considerable length in the...

... deformable up to about 8%. The transformation temperature can be influenced by the alloying ratio. Nitinol alloys with a low transformation temperature, such as 0 °C, are colloquially referred to as superelastic. At room temperature, superelastic material behaves similarly to spring steel or spring wire. Nitinol is favored for surgical tools or implants due to its high deformability and good corrosion resistance, but it is also frequently used in commercial mechanical engineering.

...• Double-acting for internal and external gripping as well as short cycle times, with one compressed air connection for opening and closing • Housing and jaws made of high-strength aluminum alloy • Adaptation of custom gripping jaws • Optional detection of piston position A [mm]:76 Article number:GR04.525-1 Operating pressure [bar]:1 - 6 Operating temperature [°C]:-5 - 70 b open [mm]:326 D [mm...

... of the process can also be utilized for metallic components. The binder coats the metal powder particles and allows for shaping without heating the metal to melting temperature. Subsequently, the binder is removed, and the metal powder is sintered and compacted. Due to the use of various metal powders, there are hardly any restrictions on the choice of alloy. However, piece weights are limited to 0.1 g to 200 g. Therefore, the process is particularly suitable for very small components in high quantities.

...adjustable 2-scrim and 4-scrim position Stainless Steel Lens Protection: maximised light transmission and high temperature stability Extremely Robust Barndoors: made of special alloy with high strength-to-weight ratio and effective tightening function Maintenance: more shared parts, very fast access to all interior workings with three torx drivers only Improved Weather Protection / IP23: safe...