spindle drives Germany

We are specialists in threads of all kinds. Whether it's metric threads, trapezoidal threads, steep threads, round threads, cross threads, ACME, ball threads, saw threads, special threads, and so on. We accept every challenge. We supply spindles, threaded rods, thread pieces, nuts, thread adapters, thread clamping rings, thread bushings, threaded bolts, threaded sleeves, threaded pins, anchor ro...

...The profiled guide slide PFS is available in 5 series with sizes from 100 mm up to 425 mm width and strokes up to 2000 mm. To protect them against dirt accumulations, the slides are covered with bellow covers. Other covers on request. The slides are available in aluminium (nature anodized), or casted iron GGK-25. Optional steel C-45. The ball thread spindle drives are available in the qualities...

...Thomson spindle drive gears are suitable for loads ranging from 2.5 to 500 kN. They are manufactured to the highest quality standards for high precision, cost-effectiveness, durability, and safety.

...Spindle axes or belt axes. Our linear axes are available as a complete system with motor and controller. Colibri-L SE and Colibri-L ZE Through a variety of combination options, we provide you with a perfectly tailored drive unit for your application. - integrated ball recirculation guide system - ball screw or simple sliding screw systems - protected interior through a proven band cover system - versatile mounting options - stable construction, easy assembly...

...Fanuc drives The following options are available for servo and spindle drives and supply modules manufactured by Fanuc Purchase a reconditioned replacement part or new part Replace a reconditioned replacement part or new part Purchase product overhaul repair or cleaning & inspection services We will be happy to supply an onsite service incl. support over the phone, upon request. Our extensive...

... – eliminate clearance easily at low cost drylin® disc drylin® - Trapezoidal threaded spindle drylin® - Trapezoidal threaded spindle drylin® - trapezoidal lead screws made from aluminum, coated drylin® - Trapezoidal threaded spindle, Aluminium drylin® - Trapezoidal lead screw spindles with pin drylin® - Trapezoidal threaded spindle with pin drylin® - Trapezoidal lead screw spindles reverse...

... Options: Black anodized aluminum profile Electromagnetic brake in the motor module or in extension of the drive spindle Steel slide LS2 (Item No. Profile length (L1): from 290 mm to 2990 mm Travel path at 1 x WS 5 / 70: Profile length (L1) - 150 mm Travel path at 2 x WS 5 / 70: Profile length (L1) - 280 mm Maximum length: up to 3490 mm and special lengths upon request.

...Trapezoidal screw drives are cost-effective machine elements that convert rotary motion into linear feed motion. They consist of the trapezoidal screw spindle with a nut. The advantages over the more complex ball screw drives include not only the price but also the self-locking feature of lead trapezoidal spindles (lead angle < 4°) for lifting and clamping devices. Furthermore, high availability...

...Ball screw drives consist of a spindle, a nut with balls, and the bearing.

...With easyE-line, you get an in-line actuator with a particularly slim design. The linear arrangement of the motor, gearbox, and spindle results in a very compact format for installation. With outer diameters of 35, 50, and 60mm, the actuator fits into almost any application. And it can handle forces of up to 10,000N (easyE-60). What the actuator needs to do is managed by the corresponding control system. Whether it's plug-and-play or integration into your PLC, synchronous adjustment of multiple cylinders, or mobile battery operation - you can find all of this in the easyE-line program.

...Headstock for grinding machines with fine adjustment of the spindles via two bevel gear drives. Both spindles can be ergonomically operated by the operator from the front. Space issues related to the machine have been resolved here using angle gears. Clamping range: Dmax 300 mm - Dmin 30 mm Center height: 434 mm Maximum workpiece weight: 3,500 kg Spindle diameter: 70 mm Machine tool: TOS BUC 85...

...With a speed of 100,000 rpm and an elastic spindle housing, you achieve optimal surface quality with minimal noise levels. No vibration marks, even for the most precise deburring tasks. The TVD 3-100/3 ULTRA stands out with special hybrid bearings (steel/ceramic), which allow for a significant improvement in lifespan across almost all application areas. Drives: pneumatic Other features: straight, precision, front exhaust, for deburring...

... simplified and clearer operation of the programming, the control panel is equipped with a touchscreen display. Extensive accessories allow for optimal adaptation of this robust universal machine to any winding task. Corrosion-sensitive parts are surface protected. All drives have sufficient reserves to achieve the longest possible service life, even under the most demanding operating conditions.

...The spindle drives of the Mini series are characterized by a particularly compact design in relation to their performance. Therefore, they are ideally suited for areas where space is limited. The Mini drives cover a very wide range of applications thanks to a variety of options that are available as standard. Despite their compact and lightweight construction, they are extremely robust and durable.

...Trapezoidal screw drives consisting of trapezoidal screw spindle and trapezoidal nut. Bar stock Ø10 to Ø80 available in stock. NEFF trapezoidal screw drives are manufactured in rolled design according to DIN 103. The higher strength achieved through the rolling of the trapezoidal screw spindles and the high surface quality of the thread flanks, combined with the trapezoidal nuts, results in...

...We provide a wide range of products in multi-spindle drilling heads / drilling drives. The right drive for every customer. Custom drives are our core competence. Feel free to inquire with us; we have already developed several customer-specific special solutions.

...Precision Ball Screw Drives Diameter from 5 to +200mm Lengths up to 15.5 m Dynamic load capacity up to 4,000,000 N Efficiency µ up to 97% Accuracy classes P0, P1, P3, P5, T5, T7 (according to ISO 3408) Materials for the spindle: *Heat-treated steel 1.7225 (42CrMo4) *Heat-treated steel 1.7228 (50CrMo4) Material for ball screw nuts: *100CrMn6 Special designs according to customer requirements...

... control of the lifting units. To prevent the system from becoming too long, the use of a spur gear is recommended. This allows the motor to be arranged parallel to the lifting spindle, and the gearbox with alternative gear ratios of i=4 / i=10 and i=25 enables the use of smaller motors.

...Ball screw drives from the world market leader – the right spindle for every positioning task.

...RoboCylinder & IntelligentActuator Slider Types Slider type actuators are mainly used for transporting and positioning workpieces horizontally or vertically. To meet the requirements in terms of payload, speed, spindle pitch, precision and much more, IAI offers many choices in both the RoboCylinder and IngelligenActuator series. These include extra-wide slide axes whose base frames have...

...Trapezoidal lead screws convert rotational movements into linear movements and are primarily used in linear drives. In cross-section, the shape of the thread resembles an isosceles trapezoid with an angle of 15°. This results in a flank angle of 30°. We manufacture: - Single-start and multi-start metric ISO trapezoidal lead screws according to DIN 103 - Flat metric trapezoidal threads according...

...Ball screw drives and feed bearings • Spindle design rolled, whirled, and ground • Ball screw nuts and ball screws according to drawing or as per catalog and DIN 69051 Included • Flange nut for ground spindles • Flange nut for rolled spindles • Cylinder nut for rolled spindles • Rolled spindles...

...). The mounting of the devices on the spindle is done via a hollow shaft and does not require an additional coupling. The mounting of the gearbox can be oriented as desired to create the most suitable geometry for the available space. No additional transmissions or angular connectors are needed. Nominal torque / Nominal speed: 2 .. 8 Nm / 200 .. 50 rpm Stroke: 977 .. 4026 revolutions Protection...

...DC drive with worm gear in two translations. Especially quiet thanks to the solid die-cast housing and decoupled mounting. Rotating spindle with spindle nut for use with limited current supply of 5A. Optional one-sided brake in case of lack of self-locking.

... externally accessible grease nipples for convenient, centralized lubrication, provide the demanding user with the assurance of a complete drive package with linear axis, gearbox, and motor as a system solution from a single source. With spindle, timing belt, and linear motor, the HRM series offers three drive variants, covering all applications where speed-optimized movement of medium to large masses and forces with a smooth motion sequence, as well as highly precise positioning, are essential.

...Heavy made easy: Spindle lift drives Lifting, pushing, or pulling loads – with the powerful spindle lift drives from DRECKSHAGE, almost nothing is too heavy. Our extensive system toolkit is designed to configure the exact product suitable for your needs from many standardized components. This means there are no limits to the application possibilities. Some application examples for spindle lift...

...The Leistritz swirling machine LWN 90 S is equipped with the external swirling unit AWS 90-S for processing ball screw drives with an outer diameter of approximately 3 - 28 mm and a spindle length of up to 300 mm. This machine type is the result of many years of experience in the field of thread swirling. It has been designed according to the latest technical insights. Furthermore, great attention has been paid to production-oriented and ergonomic features, leading to increased productivity and precision.

... automated by us through various handling systems, including loading from bulk material and placing into your blisters after washing, measuring, and labeling. Technical Details Complete processing in 3 clamping positions via X-, Z-, and C-axes Integrated spindle drives from 8.9 to 34.2 kW as standard Bar processing up to Ø 48 mm as standard (optional) Up to 15 tools per spindle as standard (optionally with tool drive) Y-axes on the tool side (optional) Axis speeds up to 60 m/min...

...At the request of our diverse customers, we also supply complete drives with motor, coupling, bearings, guidance, spindle, measurement system, and cover. Custom controls and software enhance usability and simplify operation.

...In our product catalog for Drives and Drive Systems, you will find information on the various series of actuators, telescopic lift columns, controls, and operating elements. They are used in agriculture, medical technology, woodworking machines, equipment manufacturing, general mechanical engineering, and much more.