Lunette Type 1-1 Variant 1 with Folding Top
Lunette Type 1-1 Variant 1 with Folding Top

Lunette Type 1-1 Variant 1 with Folding Top

For this type 1-1 collet, we have achieved a peak height of 800 mm with a diameter of 500 mm. This size is the largest that can still be opened in the foldable area. Clamping range: Dmax 500 mm - Dmin 100 mm Peak height: 800 mm Maximum workpiece weight: 2500 kg Spindle diameter: 70 mm Machine tool: Geminis GHT-9
Similar products
1/15
Goggle with removable top Type 2-1 Variant 1
Goggle with removable top Type 2-1 Variant 1
Diameter 800 mm for Boehringer lathe bed with lower 4th tailstock, designed for a workpiece weight of 3.5 t, with Richter special rollers. Clamping r...
DE-30855 Langenhagen
open headstock with 4 spindles type 7-4 variant 3
open headstock with 4 spindles type 7-4 variant 3
Open 4-jaw chucks are used for thin-walled pipes and for milling from above. Clamping range: Dmax 660 mm - Dmin 260 mm Center height: 410 mm Maximum ...
DE-30855 Langenhagen
Roller Block Type 8-1 Variant 12
Roller Block Type 8-1 Variant 12
This chuck is specifically designed for use in a vacuum. All cavities are vented through drilled holes, allowing for a quick establishment of a secure...
DE-30855 Langenhagen
Glasses with left/right swiveling top over Ø...
Glasses with left/right swiveling top over Ø...
Frame with swivel top and lifting eccentric. (shown here in half-open position) Clamping range: Dmax 1200 mm - Dmin 580 mm Peak height: 590 mm Maximu...
DE-30855 Langenhagen
Running bezel, 2 spindles, top-mounted type...
Running bezel, 2 spindles, top-mounted type...
Running Tailstock Clamping Range: Dmax 450 mm - Dmin 250 mm Center Height: 340 mm Maximum Workpiece Weight: 2500 kg Quill Diameter: 70 mm Machine Too...
DE-30855 Langenhagen
C-Form Lune with Swiveling Top Type 5-1 Variant 5
C-Form Lune with Swiveling Top Type 5-1 Variant 5
Lathe with swivel top. Clamping range: Dmax 410 mm - Dmin 100 mm Peak height: 523 mm Maximum workpiece weight: 4000 kg Spindle diameter: 100 mm Machi...
DE-30855 Langenhagen
Glasses Stand Type 12-2 Variant 3
Glasses Stand Type 12-2 Variant 3
The tailstock with stand is anchored and aligned on the floor behind the lathe at a distance of about 3 meters. It is used to support a shaft or a pip...
DE-30855 Langenhagen
C-Form Lune with Swiveling Top Type 5-1 Variant 1
C-Form Lune with Swiveling Top Type 5-1 Variant 1
The turret top can be rotated sideways using a crank mounted on the side. The entire turret weighs approximately 2.5 tons and has an overall height of...
DE-30855 Langenhagen
9 o'clock Pinole: Fine adjustment via differential thread 5...
9 o'clock Pinole: Fine adjustment via differential thread 5...
With upper spindle fine adjustment and scale. Lower spindle for wedge displacement. Clamping range: Dmax 125 mm - Dmin 50 mm Center height: 345 mm Ma...
DE-30855 Langenhagen
9 o'clock Pinole: Fine adjustment via differential thread 5...
9 o'clock Pinole: Fine adjustment via differential thread 5...
Lower spindle for wedge displacement. Clamping range: Dmax 260 mm - Dmin 240 mm Tip height: 315 mm Maximum workpiece weight: 2,000 kg Pinole diameter...
DE-30855 Langenhagen
C-Form Lune with Swiveling Top Type 5-1 Variant 6
C-Form Lune with Swiveling Top Type 5-1 Variant 6
Sleeve for steady rests used on Mazak machines, applicable following the size range of a collet steady rest. Clamping range: Dmax 610 mm - Dmin 300 m...
DE-30855 Langenhagen
Glasses with left/right swiveling top part Type...
Glasses with left/right swiveling top part Type...
This steady rest is designed for a Boehringer VDF 400 machine. The special feature is that it is prepared on the chuck side for a large diameter range...
DE-30855 Langenhagen
Richter Special Plastic Running Rollers Type 13-2 Variant 1
Richter Special Plastic Running Rollers Type 13-2 Variant 1
Special plastic guide rollers for workpiece surfaces that must not be damaged. Compared to steel rollers, plastic rollers can only withstand significa...
DE-30855 Langenhagen
Running bezel, 3 spindles, top-mounted type...
Running bezel, 3 spindles, top-mounted type...
Follow-up Steady Rest Clamping Range: Dmax 140 mm - Dmin 20 mm Center Height: 180 mm Maximum Workpiece Weight: 800 kg Spindle Diameter: 40 mm Machine...
DE-30855 Langenhagen
Glasses with detachable top part Type 2-1 Variant 10
Glasses with detachable top part Type 2-1 Variant 10
Bearing for the reception of heavy rollers on their bearing pins Clamping range: Dmax 400 mm - Dmin 250 mm Height of center: 1,295 mm Maximum workpie...
DE-30855 Langenhagen

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play