steel fiber Germany

... beam strikes the sheet and causes it to melt. Laser cutting is extremely versatile. In addition to flat materials, pipes and profiles can also be processed with laser cutting machines. Primarily, steel, stainless steel, and aluminum are cut. The thickness of the processed sheet metal ranges from 0.8 to 25 millimeters.

...Application: In air handling systems and devices, climate and painting systems Standard sizes, as well as any custom size with full cardboard frame or metal frame (galvanized steel sheet, aluminum, stainless steel) frame filters with fiberglass or synthetic fiber, zig-zag cells with folded filter fleece reinforced with support grid. Moisture resistant up to 100% relative humidity, temperature resistant up to 80°C, tested according to EN779, self-extinguishing according to DIN 53438 F...

...Bag Fill Modern, flexible, customer-oriented Technical data Container types Valve bags, open bags, cardboard boxes, drums and fiber drums Container fastening: Plastic bags, welded; paper bags, sewn; valve sacks, valve welded or folded; cardboard boxes / drums tied with liners so they form goosenecks and then fastened with clips Product-contacting parts: Stainless steel, partially...

... tape measure in the housing - Storage of the tape measure in the housing - Rust-free stainless steel tape measure - Convex curvature of the tape - Absolutely waterproof - Accuracy of tape measure EG II - Accuracy of spirit level 1.0 mm/m - Made in Germany Housing - Glass fiber reinforced polyamide Weight - Approx. 75 g Housing Dimensions - 1m: 62 x 25 x 52 mm...

... stone (Corian) Hybrid construction of all materials in combination, as well as with stainless steel, steel, and aluminum. Our competencies in this area are governed by high customer-specific requirements and international standards. We support our customers comprehensively with preparation of the necessary documentation according to their individual requirements in the following areas: FEM verifications Weld documentation and inspection Gluing documentation Risk assessment Project documentation. Out portfolio encompasses: Partition walls...

... insulated with heat and flame-resistant special fiber material according to EN ISO 20345:2012. Contact heat resistant up to 300°, water, oil, and dirt-repellent special leather, complies with protection class S2, with steel toe caps for toe protection.

...Extensions in all materials: stainless steel, titanium, aluminum, ceramic, and our exclusive extension in thermally stable carbon fiber with titanium plug for maximum stiffness and weight savings.

... interface, all processing options are available to you as a customer. Features: - Round tube ∅ max. 152.4 mm - Square tube max. 152.4×152.4 mm - Special and open profiles - Non-ferrous metals and other alloys - Bar weight up to 23 kg/m - 3D laser cutting - 3KW fiber laser source - CAD interface...

...Additive Manufacturing Wire Feed Laser in Vacuum Versatile system for additive manufacturing: laser melting with wire feed in vacuum Compact design with vacuum chamber Pre-vacuuming prevents pore formation and is sufficient for steel High vacuum available for TiAl, refractory metals, and superalloys Fiber laser with scanner or wobble Optics protected against metal vapor and thermal radiation Variable focusing system optional CNC-controlled wire feeding system in vacuum Thermal imaging camera (1kHz) for process control...

... secondary distribution point or fiber optic relay in a large infrastructure. Self-ventilated housing made of steel sheet, lockable door with closure, door opening angle of 180°, entry door with safety glass window (4 mm), profiles permanently mounted at the front, cable entry possibly from the top or bottom, openings 120 mm x 35 mm, long holes for wall mounting, light gray.

...One of our core competencies is the production of hot press tools used for manufacturing fiber-reinforced plastic parts made from GFRP and CFRP, such as interior panels for aircraft cabins, exterior panels for commercial vehicles, and underbody panels for passenger cars. Another focus is the creation of forming/punching tools for thin-walled shielding plates made of aluminum and stainless steel...

... materials up to a sintering temperature of 1300 °C. Two sample programs, which can be customized for individual customers, are already pre-set. Additional advantages of the Nabertherm Sintering Furnace LT 02/13 CR: Maximum temperature of 1300 °C Working temperature up to 1280 °C, depending on the CoCr material used Furnace chamber lined with high-quality, durable fiber material, not classified Low outer temperatures and high stability due to double-walled stainless steel structural sheet housing Gas supply system with solenoid valve and flow meter Rapid cooling via...

... colors of your choice, as well as band-coated in RAL 8014/9002 - Cold-rolled steel profiles galvanized or with aluminum-zinc coating, and available in all RAL colors upon request - Extruded aluminum profiles in raw, anodized, or RAL colors of your choice Each available in combination with plastic or aluminum inner profiles and Styrofoam, mineral fiber, or PU foam inserts.

... laser i104HD marks a wide variety of materials such as steel, aluminum, stainless steel, titanium, plastics, and more with high contrast. Logos, alphanumeric codes, and inscriptions, as well as 1D and 2D codes (barcodes, DataMatrix), are executed with even greater accuracy and sharpness. The cycle time is reduced for materials like aluminum, and the contrast on plastics is enhanced.

... industrial insulation: e.g., dust filtration for cement plants, steel or powder facilities, air filtration for painting areas operating at over 300°C. 3- Composite materials: by utilizing insulation, flame resistance, and high-temperature stability, cut fibers can be used as additives.

... the optimal material. We manufacture perforated sheets from bare, galvanized, or coated steel, stainless steel, non-ferrous metals such as aluminum (also coated), copper, brass, and titanium, as well as from plastics, hard fiber, and cardboard. Surface treatment of perforated plates is also possible: painting, coating, hot-dip galvanizing, electroplating, and more.

... thicknesses between 1-3 mm. Mica is also gaining increasing importance in the pure sealing sector. Applications in temperature ranges above 400° C are increasingly covered with mica, as graphite materials begin to burn in this temperature range when exposed to oxygen. You can find mica semi-finished products in the seals we supply, including: - Cam profile seals, - Spiral seals, and - Seals with stainless steel inner lining. Semi-finished products from the following manufacturers are usually available from stock: • COGEBI...

...Test specimens made from various materials such as steel, aluminum, wood, plastic, glass, fiber cement ... in different qualities according to various standards and in defined dimensions.

... ovens. Chamber ovens can be equipped with sliding doors or swing doors. The heating method can vary depending on the desired recirculation temperature and the available energy source, such as hot water, steam, thermal oil, gas, or oil. The construction is made in a cassette design from sheet steel insulated with mineral fiber wool. For high-quality coatings, recirculation filters are used to filter out dust and dirt particles depending on the filter class.

...stainless steel, high-alloy chrome-nickel steel, titanium, brass, copper, plastics, composite materials and fiber-reinforced plastics (GRP, CFRP), stone, ceramics, glass, rigid foam, insulation and insulating materials, wood, rubber, hard fabrics, and much more.

... pressure Long service life Easy operation Extended lifespan of the protected pump Reduced downtime Longer maintenance intervals Various series for different requirements and flow rates Flow rate: Up to 765 m³/h (depending on the series) Filter fineness: Down to 0.1 µm Material: Housing: Stainless steel 1.4404 (316L), aluminum, or nylon Filter elements borosilicate microglass fiber Connections: 1/8" - 3" internal thread (G or NPT) optionally with flange DN 50 - DN 100...

...The Polo SAFI-C suction belt filter is used for high flow rates and as a central filtration system. A compressed dirt cake is formed, which is dry and firm. The POLO suction belt filter SAFI-C is a fully automatic filter designed for the cleaning of various cooling and liquid media. The container is welded from steel sheet. A transport chain carries the endless belt or fiber fleece. A drip tray...

...With Hörmann's entrance door systems, we meet nearly every requirement for a front door: - Thermo65 > Steel door leaf, burglary-resistant - Thermo Safe > High thermal insulation thanks to thermally separated 80 mm aluminum door frame, standard RC 3 security features, 5-point locking system - Thermo Carbon > Champion in thermal insulation and top in security classes with UD values of up to approx. 0.47 W/(m²·K), standard RC 3 security features, 9-point locking, high-tech wing profile made of carbon-fiber hybrid material.

... Structural Steel","Heat Resistant Steel","Machine Construction Steel","Corrosion Resistant Steel","Acid Resistant Steel","SM Steel","Special Materials","Special Steel","Quenched and Tempered Steel"],"Plastics":["Fiberglass Fabric","Hard Fabric","Hard Paper","Rigid PVC","Makrolon","Plexiglass","Polyacetal","Polyamides","Polyethylene","Polypropylene","PPO","Teflon","Vulcan Fiber","Vulkollan","Flexible PVC"]}...

...Duo Pack with E500 - HSS Machine Taps for 1.5xD Through and Blind Hole Threads and A002 - HSS TiN Coated Twist Drills for Universal Use in Steel <1200N/mm², Cast Iron, Copper, Brass, and Aluminum Alloys, as well as Plastics and Fiber-Reinforced Plastics Duroplasts Content: Tap + Core Drill + Core Drill Coating Variant for Tap: Uncoated Coating Variant for Twist Drill: TiN Coating Standard for...

... constructions, etc.). Coating of capacitors (film or paper capacitors). Coating of heat exchangers for air conditioning systems. Delivery Program Standard diameters: 1.2 mm – 4.76 mm according to DIN EN 14919:2001. Other dimensions available upon request. Grillo zinc wire is available on spools, in rings, or continuously wound in fiber or metal drums.

... for concentration measurement in the ppm range. Both probes are often carried along; the CFRP mini bell probe is ideal for this. All bell and borehole probes are available with a demountable rod to fit in the carrying case - complete set with borehole probe CFRP, bell probe CFRP and foldable carpet probe CFRP weight-optimized. Weight:0.3kg Material:Carbon Fiber Color:Black...

...The applications for barrels are very diverse, and so are the types of barrels. Fiber drums, steel sheet cans, bung or lid barrels made of PE or steel sheet, internally coated or raw, with or without UN approval.

...Fiber Optic Pulling Needle Type FV3 - Length 300 m - Ø 9 mm - Roll Ø 1000 mm made of painted steel - 2 wheels Ø 100 mm - Threaded end M10 at each end - Front double-function head (guiding head and pulling eye) - Brake and guiding system for Fiber Optic Pulling Needle FV3...

... to ensure optimal suction performance. Thanks to the suction system, it is not possible for the personnel applying the paint to be affected by the paint fumes. Wet paint particles that are suctioned from the air by a suction fan are captured by the accordion filter at the back of the cabin. Wet paint particles in trace amounts that are not captured by the accordion filter are caught by the fiber filter at the back.