steel fiber Italy

...Forged tempered steel hammer. Epoxy powder coating. Three-component handle with a fiberglass core and rubber grip. Handle length: 37cm. Weight: 300g / 400g / 500g / 700g Handle: Without handle / With wooden handle / With fiberglass handle...

The Remer Group has been active in the national and international market for almost a century, with steel rope production entirely carried out within our production cycle in San Benedetto del Tronto. Remer is equipped with an internal laboratory to test wires and cables (chemical, physical, and tensile tests). The steel wires (certified wire of European origin) are tested, drawn (i.e., brought to ...

... system, in correspondence with the shutters, by at least 40 cm. To improve the anchoring of the reinforcement system it is possible to appropriately prepare any connections made with elements in GRFP (Armaglass Connector) or stainless steel (Helix Steel AISI 304). The connections increase the efficiency of the applied reinforcement. Type, number and pitch of punctual connections must be defined during the design phase. 1.1 m/m²: The adjacent sheets of basalt fiber mesh must be overlapped along the edges by at least 10 cm. Packaging: Roll of 50 m2 UM: €/m2...

...Premixed radiant screed, grain size 3 mm, wet earth type, fiber-reinforced with amorphous stainless steel fibers, featuring high thermal conductivity, based on hydraulic binders, with compensated shrinkage for quick drying and controlled curing. It is ideal for manual or machine application, including pressure pump, for subfloor screeds to be applied directly on any stable internal surface that...

... complete equipment with a carbon steel tank that has been treated and painted, a modular fiberglass cover that can be easily disassembled, and an electrical distribution panel on the machine with an IP 55 protection rating. Moving parts (disk shaft and drum filter) are driven by a single gear motor with a power range of 1.10 to 1.50 kW. -Minimal energy consumption -Limited maintenance -Easy access -Increased floor space (compact design)...

... polypropylene fiber net. Constructed with a braided rope of 3.5 mm diameter with 6 reinforcement meshes along the entire length, complete with a 50 mm high-tenacity white polyester tape at the top, a steel cable with a diameter of 5 mm, and the center of the net. - 100% UV stabilized polypropylene fiber net Constructed with a braided rope of 3.5 mm diameter, complete with a 50 mm high-tenacity white polyester tape at the top, a steel cable with a diameter of 5 mm, and the center of the net.

...Wire transducers series WPS are composed by the draw-wire mechanics coupled to Elap multiturn absolute high-resolution encoder MEM-BUS or MEM. They can provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI output signal. The encoder grants high resolutions values (28 or 29 bit) and two availble strokes: 2300 or 5000 mm. The housing is out of glass fiber reinforced nylon, whilst the wire consists of coated poliamide stainless steel. Strokes range:2300, 5000 mm Housing:Glass fiber reinforced nylon Wire:Coated poliamide stainless steel...

...Sale of laser cutting systems for fiber optic sheets, solutions for small and medium metalworking companies looking to improve their production departments. Laser machines for cutting sheets made of stainless steel, iron, aluminum, Domex, Hardox, Corten, brass, and copper. Our agency sells Bystronic tube laser cutting systems in the provinces of: Monza Brianza, Lecco, Mantova, Bergamo, Brescia...

...Tedeschi Gomma produces fastening caps for building coverings of the BAZ type. The Tedeschi Gomma caps serve to secure building coverings, both aluminum and fiber cement, using a screw that presses against a stainless steel washer. The rubber part not only prevents water infiltration but also compensates for the thermal expansions of aluminum due to changing weather conditions. On fiber cement...

...Designed to meet filtration needs at high temperatures, high pressures, or corrosive operating applications. The FilterONE cartridges are constructed with a filter medium made of sintered microfibers in stainless steel 316L, featuring 2 layers of internal support, 1 layer of external protection, and welded ends. The special construction technology gives the FilterONE high mechanical strength...

...GENERAL TECHNICAL FEATURES - Structure made of bent and powder-coated steel. - Internal lining made of high-density Ceramic Fiber Panel (H350I), capable of withstanding temperatures up to 1450 °C. - Electric heating elements made of Kanthal A1, able to withstand temperatures up to 1400 °C, inserted into special grooves carved into the walls of the oven. - Microprocessor control model ATR-621...

...Our rack frames are made with modular structures in aluminum or steel. They can be "frame" types with only 2 rack mount posts of 19" or "cage" types where 4 or more rack mount posts fit inside a rectangular parallelepiped. All frames have similar maximum characteristics but differ in their areas of use. Two families of "cage" frames are constructed from aluminum extrusions connected by three-way...

...Osca Automazioni has developed its circular vibrating bases thanks to over forty years of experience and innovation. Recently, they have been upgraded to achieve high performance, stability, and rigidity. This has been made possible through the use of patented steel, crossply, and carbon fiber leaf springs.

...SAFETY SYSTEM AND ADVANCED SOLUTIONS: - Safety access control with key removal systems; - CCTV systems grant high safety standards and a constant and effective production control; - Integration between SCADA screens and real-time images of the plant; - Continuous recording with play-back option; - Camera system also on wireless technology and fiber optic; - Historical and Analysis with trend systems; - Material shape detection devices.

...Zirconium Grain Fiber Disc - Circular Hole. Features and Benefits: Optimal removal at moderate pressures, combined with a long product lifespan and good surface finish. Main Applications: Deburring, weld seam removal, very hard materials. Materials to be processed: Stainless steel, steel alloys, high-temperature resistant non-ferrous materials.

...The elements that make up the products and are then adapted in shape and size to different needs are: - 1 frame made of bent and electro-welded steel sheet - 1 door made of electro-welded steel sheet, compatible with the first element and equipped, through appropriate guides, with a Clack lock - 1 door panel (where present), equipped with hinges and a Mini Lock, which serves to secure the...

...USA type spatula. This item features an ABS handle. The surface is smooth and is available in steel or stainless steel. Handles available in: ABS, wood, rubber, fiber. Base available in: steel, stainless steel, ABS, smooth or serrated.

... waters drainage; epoxy mortar strips connecting the joint elements and the bituminous pavement. POS. DESCRIPTION MATERIAL A Sealant EPOBLOCK ME Binder B Transition strip EPOBLOCK ME 3c C Mortar bedding FIBER-REINFORCED CEMENT MORTAR D M12 Anchoring system E Gutter Hypalon F "L"-shaped drainage profile X5 CrNi 1810-UNI 8317...

... on producing products for the mechanical sector and to enable customers to acquire the finished product through a network of external partners established over the years, A.S.T.M. concentrates its activities on open-die and closed-die forging/stamping for components ranging from 0.200 kg to 25 kg in carbon steel, alloys, and stainless superalloys. It has become self-sufficient in designing and manufacturing its own production equipment and integrating the specific professional figures to complete its corporate organization.

...and functionality. Thanks to our machinery and decades of know-how, our processes range from deep drawing (hydraulic presses from 40 to 250 tons) to stamping using hydraulic presses, cold or hot forming with levers, mechanical or laser cutting in 2D and 3D (even on semi-finished or drawn parts, ensuring speed, no burrs, and no deformation of the piece), 2D and 3D fiber laser welding on complex...

... moving installations, festoon cables, self-extinguishing cables, PVC, silicone, fiber optic, solid, perforated, and threaded copper bars, aluminum cables. Area of expertise: PUGLIA, CAMPANIA, LAZIO, BASILICATA, EMILIA ROMAGNA.

...The company Baldan Giuseppe has developed in the field of sheet metal processing and metal carpentry in general. The carpentry specializes in: CO2 laser cutting, fiber cutting, sheet metal processing, bending, MIG/TIG welding, automatic pin welding, edging, and shearing. Processed materials include: iron, stainless steel, aluminum, brass, and copper. Maximum cutting thickness up to 25 mm. Market...

Effea2 offers garden furniture and furnishings for hospitality structures and public activities: restaurants, bars, hotels, campsites, residences, swimming pools, and water parks. We also have a dedicated catering line as well as a professional line for pools and beaches. We provide a versatile range of outdoor furniture in various materials such as wood, rattan, iron, resin, natural fiber, steel...

... leather-like skin, wood, horn, bone, methacrylate, PVC of various thicknesses, and metal including brass, copper, zinc, aluminum, and stainless steel with a 1000W fiber laser. This allows us to create beautiful inlays for furniture. Regarding artistic wooden floors, metal wood, and mother-of-pearl wood, we can assist you from the design phase to final installation, ensuring that you receive a piece that is truly a work of art.

Sprech Srl designs, produces, and distributes modular covers and fabric tension structures made from high-strength polyester fiber coated with PVC and treated with PVDF protection, along with supporting structures in steel, aluminum, and wood, under ISO 9001:2008 certification. Sprech promptly offers solutions for every market requirement, backed by solid technological know-how maintained by an...

Sillaro is capable of meeting a constantly evolving market and providing its customers with a comprehensive and flexible service. Thanks to a continuous process of renewal, Sillaro is also able to offer a wide range of drums and cardboard tubes for industrial use in the steel, chemical, pharmaceutical, and food sectors. Drums in fiber Manufacturing of drums for industrial containment for steel...

...Formigli is an Italian custom road bicycle builder. Each frame is handmade and customized for its rider's unique body measurements and racing needs. Renzo Formigli has been hand-crafting racing bicycles for over twenty years. He works with the highest quality carbon fiber, aluminum, and steel and produces elite functioning works of art in his small workshop in Florence, Italy.

... stainless steel line, we offer: stainless steel feet, leveling feet for machine tools, articulated feet, and supports for machine tools. This line is particularly suitable for sectors where hygiene regulations are in place. Applications include: pharmaceutical, chemical, nuclear, wine, dairy, beverage, and food industries in general.

Water Jet Cutting Technology2000 is a company that offers water jet cutting services on any material such as: glass, carbon fiber, multilayer materials, steel, brass, copper, aluminum, marble, plastic. Thanks to the experience gained over the years, Technology 2000 is able to use the power of water to work with carbon fiber with extreme precision, not to mention that, thanks to this technology, rubber can be cut without damaging or wasting it.

...Fiber cement coverings with asbestos-free sheets, aluminum/steel roofing, polycarbonate cladding, legal disposal of asbestos...