inductive sensor Germany

... with high temperature, pressure, and aggressive media. The devices of the SLX Series are perfectly equipped for use in this area and guarantee the highest reliability and lifespan thanks to their extremely robust construction, a completely sealed stainless steel housing, and high resistance to media and temperature. Key Features ■ Measurement ranges 10...300 mm ■ Linearity up to ±0.10 % of the measurement range ■ High protection class IP68/IP69K ■ Operating temperature sensor up to 200 °C ■ High resistance to aggressive media ■ Custom designs...

...The capacitive level sensor NR 160 is designed to monitor liquids and powders with high relative dielectric constant εr 35 … 85. The functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The switch point is adjustable by means of a teach-in momentary switch.

...Radar material flow sensor for pipes and hoses...

...LVDT sensor with free moveable plunger. The non-contact measurement is completely wear-free. LVDT sensors are primarly used for measurement of movement, displacement and position in vehicles and machines.

...Proximity switches in cylindrical design from M5 to M30 with plastic or nickel-plated brass housing and stainless steel, flush or non-flush mounting. With cable or connector connection. With IO-Link. Sensor technology for all different sensor principles, thus achieving a wide range of applications for specific tasks. Inductive and capacitive proximity switches. Optoelectronic sensors, optical, conductive, capacitive, and magnetic level limit switches, radar sensors, ultrasonic, and magnetic sensors.

...The very compact torque sensor type 8656 is designed to be contactless. The torque is measured through the torsion of the shaft using the strain gauge principle. Thanks to the inductive and optical transmission of signals, the sensor is maintenance-free; the signals are digitized directly on the shaft and made available as a voltage signal or via USB by the evaluation electronics. With high...

...The infrared temperature sensor from Therma is perfect for measuring the current tyre temperature. The temperature of the tyre and thus the associated effects are decisive factors for success in motor sports. The tyre pressure is strongly temperature-dependent. The measurements collected by the sensor permit conclusions to be drawn for ideal vehicle tuning. Large fluctuations have a direct effect...

...These are the pin ring made by stainless steel,which is the accessories used for sensor.

...["— Sensors available in AC and DC versions\n","— High switching frequencies up to 4000 Hz\n","— Fully encapsulated versions with protection class IP67\n","— Robust metal or plastic housings\n","— Temperature range: -25°C to +70°C\n","— Switching distances: 2 mm to 8 mm\n","— Cable/connector versions\n","— 10 – 36 V DC or 76-250 V AC\n","— PNP / NPN or AC versions\n","— Normally closed / Normally open versions\n","— Function indicators\n","— Short-circuit proof versions\n","— Versions with IO-Link\n","\n","Technology: inductive\n","Shape: cylindrical M12\n","Protection class: IP67"]...

...This series complements the purely switching sensors with inductive proximity sensors featuring an analog output for measurement tasks. The analog signal is proportional to the approach of the metal part. This sensor is also available in a version that can withstand temperatures up to 160° C. The proximity sensor operates on the proven inductive principle: When metallic objects approach, the...

...Measuring tasks can be solved with different sensors. The inductive linear position sensors operate contactlessly and wear-free based on a revolutionary measurement principle. The position is not detected via a magnetic position transmitter, but through an inductive oscillating circuit. Magnetostrictive linear position sensors for position detection in hydraulic cylinders or linear position...

... as variants in which the CSN® Current Sensor will be mounted hanging in the busbar. Schniewindt has implemented CSN® Current Sensors for nominal currents of up to 5 kADC at system voltages of 800 kVDC, which have been successfully typetested. Also for the precise measurement of small currents (1 to 10 A), such as transient currents in capacitor banks, Schniewindt offers appropriate solutions. All of our CSN® Current Sensors are individually designed according to customer requirements. ...

...The OPTIFLUX 1000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100 or IFC 300 signal converters it forms the OPTIFLUX 1050, OPTIFLUX 1100 and OPTIFLUX 1300 electromagnetic flowmeters for water and other conductive, non-abrasive media and OEM machinery applications. Fluid::for water; for liquids Other characteristics::in-line...

... flat-seat valves (from MR 290), optional spring-loaded single ball valves. . Safety: Separation chamber with drainage tube between dosing head and gearbox protects against leaks. . Flexible stroke adjustment: Can be adjusted manually or electrically (ATE). Optional extensions: . Dual dosing pumps for increased performance. . Stroke counting with inductive sensor for precise batch processes. . Frequency inverter control for variable control.

...The linear displacement sensor operates on the principle of differential measurement (inductive half-bridge). It consists of two coils encapsulated in a stainless steel cylinder that provides good protection against vibrations, shocks, humidity, oils, and corrosive materials. The displacement of a mu-metal core placed at the center of these coils causes opposing variations in inductance. The...

...Application: Position detection on hydraulic steering cylinders Robust customized sensor, NOVOPAD non-contacting inductive measuring principle. - magnetic field resistant - redundant for safety category 3 / PLd - non-contacting position detection - protection class up to IP 69K Automotive-Applications.pdf For more information please contact: automtive@novotechnik.de, +49 711 4489-197...

...Contrinex BASIC inductive sensors have a worldwide and well-deserved reputation for uncompromising accuracy and exceptional reliability.

... Switch output type: PNP Switch function type: Normally open Mechanical installation condition for sensor: quasi-flush Active area material: PBTP Protection class (IP): IP67 Correction factor (St37): 1 Correction factor (VA): 0.7 Correction factor (Alu): 0.3 Correction factor (Ms): 0.4 Correction factor (Cu): 0.25 Cable entry: axial Orientation of cable entry: axial Switching frequency: 800Hz...

...These devices measure the effective dimension while taking into account all form errors (envelope gearing) in fit gears. The flank play measuring devices have three fully toothed discs. The two outer discs are rigid, while the middle disc is slightly rotatable with the help of spring force. This causes a change in the tooth position, which is indicated by a fine pointer or inductive sensor. The...

... Analog Output:0 ... 7 or 1 ... 8 (log-linear, 1 V/decade) 0 ... 10 (linear) 0.375 ... 5.659 (non-linear S-curve) 0 Setpoint relay:2 (single-pole double-throw relays (SPDT)), 1 A at 30 V (dc) resistive, or V (ac) non-inductive gauge:9-pin D-Sub female analog output, serial interface:9-pin D-Sub male relay outputs:6-pin pluggable terminal block power:2-pin pluggable terminal block Interface (digital):RS232, RS485 Housing:1/8-DIN panel-mount enclosure (aluminium extrusion) Weight:250...

...Inductive distance sensor for automated metal inspection processes, requiring an analog signal - Compact device (stainless steel housing with mounting plate) - for switching distances up to 140 mm - for ambient temperatures from -20 °C to +70 °C - easy to install - wear and maintenance-free - shock and vibration resistant - no mechanically moving parts - temperature compensated - short-circuit and interference voltage resistant...

...INDUCTIVE CONDUCTIVITY MEASURING DEVICE FOR HIGH REQUIREMENTS »» CONCENTRATION MEASUREMENT AND CONTROL OF THE CIP PROCESS »» QUALITY ASSURANCE AND CONCENTRATION MEASUREMENT » Wear-free, inductive measuring method » Accurate measurement through compensation of temperature influence » Analog output for conductivity and temperature » High reproducibility and fast response time » Installation...

... and vibrations. They are also short-circuit proof and can be installed in any orientation. Their lifespan is independent of the switching frequency and the number of measurement cycles. Beneath the active surface of the inductive sensors, an LC oscillator circuit is arranged. The electromagnetic field generated by this circuit is influenced when metals (e.g., steel, aluminum, or brass) come close. When the metal reaches the set switching distance, the output switches.

...Non-contact multi-channel speed sensor with square output signal, brass threaded tube, differential Hall or inductive magnetic principle. Due to its design and certifications, it is particularly suitable for shipbuilding. Robust housing: IP66/IP68 Excellent vibration and shock resistance Variable lengths, screw threads, and electrical connections Optional with two galvanically isolated output...

With curiosity and determination, the Sensor People from Leuze have been creating innovations and technological milestones in industrial automation for 60 years. Their drive is the success of their customers. Yesterday. Today. Tomorrow. The high-tech portfolio of the technology leader includes a wide range of different sensors for automation technology. For example, switching and measuring sensors...

... tilt angle dependant swing of which is measured, depending on the application, either by a potentiometric, non-contact inductive or an optoelectronic angular encoder. For measurements relevant to safety, the pendulum swing per axis is detected with redundancy i.e. by means of two mechanically and electrically independent pendulum systems. The output signal, representing the tilt angles, is provided either in form of an analog resistance, current or voltage variation or as a digital signal - with interface bus - as well.

...Inductive sensors for contactless detection of non-ferrous metals. Selective behavior; Fe materials are not detected. Sensors in various designs detect only non-ferrous materials with switching distances ranging from 8mm to 20mm.

... travel sensor. On the AD / BA 1000 model, the pressure connection is external. Minimum measurement range: 95 .. 115 kPa (BA 1000), 0 .. 50 kPa (AD 1000) Maximum measurement range: 80 .. 120 kPa (BA 1000), 0 .. 50 kPa (AD 1000) Measurement uncertainty: ± 1 % Output: 0 .. 10 V or 0/4 .. 20 mA Power supply: 0 .. 10 V or 0/4 .. 20 mA...

... optimal image formation of any code - even the most challenging direct part mark (DPM) codes. The industrial-grade, rugged housing can handle up to 50 drops from 2 meters onto concrete. It is IP65 sealed and uses inductive wireless charging so there are no exposed electrical contacts to wear out or fail. Supported Devices:Samsung® Galaxy® S4, S5, S6 and S7, Apple® iPhone® SE, 5/5S, 6/6S, 7 and iPod® 5th + 6th Generation Imager:1.2 MP global shutter sensor Weight:510 g (675 g with pistol grip) Dimensions:208.6 mm x 88.9 mm x 42.1 mm...

...Unbalance tolerance violations are detected immediately, preventing subsequent damage (e.g., costly spindle repairs). Operating Principle: A vibration sensor (probe) is placed on the spindle head. Mounting can be done via a magnetic base or bolted. This sensor captures the vibrations caused by unbalance. A speed sensor (optical, magnetic, or inductive) detects one pulse per...