high temperature heating Germany

...Ready-to-install heating jackets with insulation, designed for all geometric shapes. Their flexibility and precision ensure optimal heat transfer for surface temperatures up to 900°C. Features: • Split jackets for easy installation • No additional thermal insulation required • Available in various insulation thicknesses • Wide variety of geometric shapes possible • Low surface stress • Long service life Manufactured to customer specifications...

...The HTSD-High Temperature Drum Heater is our high temperature drum heater (220 °C) and exclusively suitable for steel drums. The heating jacket is used in areas where large surfaces need heating over 90 °C. This barrel heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISD heater jackets are particularly suited...

...HIGH-PERFORMANCE TEMPERATURE CONTROL DEVICE WITH INCREASED FLOW RATE AND REDUCED ENERGY CONSUMPTION. Due to the design, sizing, and selection of the components used, the temperature control devices of the ProTemp series are among the most efficient devices on the market, operating at comparatively high flow rates. The selection series incorporates the most commonly chosen features and heating...

...Two independent burners and flue gas paths enable a double control range for individual heat extraction in the UT-HZ. — Very high efficiency across all performance ranges — Particularly suitable for highly fluctuating heating and process heat demands — Reliable solution for combined heat and power plants and processing industries with temperature levels up to 225 °C — Future-proof heat supply...

... resistance to chemical attacks, especially in humid environments in conjunction with acids or alkalis. SILCAWOOL 120 fibers can also be supplied as loose wool and contain lubricants that outgas when heated. Paper made from SILCAWOOL 120 fibers contains binders that escape during heating. SILCAWOOL 120P and 130 mats are needled on both sides and have high tensile strength. The mats do not contain any organic binders. SILCAWOOL 120P and 130 fibers are processed into boards and paper.

...High-performance heating cartridges with integrated thermoelements are recommended wherever there is not enough space for separate temperature sensors.

...What to expect with an APROVIS process gas heat exchanger: - Suitable for low and high temperature ranges - Operating pressures up to 160 bar - Compact designs for tight spaces - Applicable for a variety of gases - Implementation of customized solutions...

...Heating elements and components made of molybdenum, molybdenum-lanthanum, or tungsten High-temperature components For heat treatment at very high temperatures under vacuum or protective gas atmosphere, many components made of refractory metals are used. Our product range includes high-temperature components for furnaces used for annealing (hot zone), hardening, soldering, sintering, MIM (metal...

...Our product range offers solutions for a variety of applications. Our sealants and adhesives are primarily used in high-temperature environments. All wezi-lit products impress with their high quality and excellent processing properties. They are specifically formulated for the application case: elastic or high-strength, heat-resistant to fireproof, as well as asbestos- and fiber-free. We also...

...Housing high-temperature oven dental technology made of steel/stainless steel sheet, welded, powder-coated, with high technical and optical demands.

... vehicles. A special property of aramid nonwovens is its good thermal insulation. The laid heating wire creates a very high heat output, which is insulated by the nonwoven. Aramid has a high heat resistance, which is an enormous advantage since laying the heating wire generates a very high heat output which is further enhanced by the insulation provided by the aramid nonwoven carrier. In addition, the nonwoven is either not combustible or flame retardant and can be used for a temperature ranges of up to 200°C.

... tool heating in the many different fields in which a specific compatible operating temperature is required. High performance cartridges are essential in the thermal machining process field. High surface loadings facilitate a correspondingly high performance in a small installation area, at operating temperatures of up to 750°C at the heating cartridge jacket. We produce diameters between 6 mm and 45 mm to order. Different types of feed also allow high performance cartridges to be matched to the relevant installation situation. ...

...In light of climate change and the continuously rising energy prices, heat pumps are increasingly coming into focus as environmentally friendly and highly efficient heating systems.

... request AS 700 910 x 1220 mm Other application areas for insulation boards: Back panel insulation, wall cladding, secondary insulation in ovens. K-Therm® CS 950/ 1000/ 1100/ 1150 approx. 1000 x 2000 mm, special lengths available upon request. Front and side panels for induction heating systems. K-Therm® AS 700, 910 x 1220 mm...

... technical documentation, which helps our customers assemble the peripheral components themselves. Heating temperature: 20 - 400°C Pressure, process side: < 1 mbar to 30 bar Product viscosity: 20 - 10,000 Pa·s Operating mode: Continuous...

... optionally extended electrically. The ovens are equipped with precise digital controls and certified heating elements to ensure excellent temperature stability. These ovens can be used for hardening, normalizing, stress relieving, and other heat treatment processes up to 1200 °C.

...Temperature-resistant cable for use in drag chains in extreme ambient temperatures, such as in the steel production industry. The highly temperature-resistant, permanently flexible control cable with numbered conductors is used, for example, in conveyor systems in steel production and processing or in feeding systems for high-temperature furnaces, e.g., for use in drag chains in extreme ambient temperatures like those found in the steel production industry!

... well as for de-icing machines, vehicles, or pipelines. Thanks to the integrated oil burner with a high-quality Danfoss® pump, the desired temperature is reached quickly. The IDS 30 D guarantees high reliability with very low maintenance effort and still impresses with an attractive price-performance ratio. Of course, your safety comes first. That’s why the robust construction is equipped with electronic flame monitoring, a safety thermostat for overheating protection, and fully automatic cooling.

...Increased temperature-resistant hot air hose. The hose is resistant up to +150°C at the device connection for the first 2 meters, making it specially designed for high-performance heating devices. For the remaining length, the hose is operational up to +100°C. The first 2 meters are made of a fabric coated with neoprene for higher inlet temperatures at the device connection, while the rest of the...

... and covers the flow range from 0.19 ml/min to 1152 ml/min. The mzr-11508 is suitable for continuous delivery and discrete dosage of low and high viscosity liquids. It achieves high differential pressures and provides a low pulsation flow. Its robustness and the available accessories make it suitable for challenging applications. Advantages High dosage precision precision CV < 1% at low volumes Long...

... for the supply air piping: 1 1/4" - No fire hazard The hot air is generated here by a special, oil-free compressor. The heating of the air occurs through compression. At different pressures between 2 and 3.5 bar, different drying temperatures between 60 °C and 110 °C are also produced. The machine operator can freely choose the necessary temperature. The compressors can be operated with soft starters or frequency converters. When operating with a frequency converter, individual intermediate dryers can also be used while simultaneously saving energy...

... materials. Retrofitting is usually possible without much effort. The function is achieved through the encapsulation of the energy used. It doesn't matter whether you want to keep it cool, warm, or hot. The fabric divides or separates the spaces into different temperature zones. Technically, convection/air exchange is prevented. Additionally, heat radiation is reflected. This means that the energy is reflected back to where it came from. A technical term for these materials is Low-e. Stottrop-Textil offers a range of lightweight and heavy fabrics for many different purposes.

...Type K, 1.5mm ⌀ mineral-insulated for temperature profiling in industrial furnaces Nicrobel sheath protects against electrical interference and aggressive furnace atmospheres Type K, 3mm ⌀ mineral-insulated for high-temperature applications during steel heating Larger ⌀ is less prone to errors while maintaining flexibility Type K, "Nextel" insulated for lower temperatures or when a quick...

... dispensing. Your advantages: - Interior coated with non-stick material - No dripping or stringing due to programmable retraction - Direct linearity between dispensed quantity and rotational speed - Constant dosing volume even with fluctuations in density, viscosity, and temperature - Reliable dosing without heating the medium - High service life due to media-specific component selection - Easy...

...Grease lubrication of plain and rolling bearings at high temperatures, e.g. in painting and drying ovens, converters, pouring ladles, heating systems, hot-air fans, charging cranes, vulcanising systems and electric motors Advantages and benefits Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading Highly effective due to optimum solid...

... aggressive environments (e.g. sewage plants), while heaters with a painted or coated surface, also available with protection basket, are sufficient for standard applications. Available on request: further types of explosion-proof heaters and our technical data sheets, as well as the TR-CU certificate. Power:500W - 3000W Temperature class:T4 / T3 / T2 Voltage:230 V...

...HTO-02, water-cooled furnace for material testing. Heating chamber (D x H): 100 x 170 mm • Lightweight, thermal insulating material (asbestos-free) • Stainless steel furnace housing • The furnace is prepared for the lateral installation of a length change sensor (HT-extensometer) Model HTO-02 • Heating zones: 1 • Max. Temp.: 1600°C • Heating chamber (D x H mm): 100 x 170 • External dimensions (D x H mm): 430 x 625 • Ext. slot (H x W mm): 104 x 32 • Water cooling: yes • Electrical connection: 28V/143A • Phase cut: yes...

...These jackets are specially tailored to objects such as valves, cylinders, fittings, etc. They are available both as heating jackets with integrated heating and as pure insulating jackets without built-in heating. The jackets are made from a special aluminum-coated fiberglass material and can be used at temperatures up to +500°C. They can be easily mounted and dismounted using Velcro (important for maintenance work!). Higher temperatures are possible. Please inquire. Up to +250°C PTFE - heating conductor Up to +500°C fiberglass - heating conductor...

...Numerous production processes require heating and cooling systems. They often rely on the precise adherence to temperature gradients, such as in a printed circuit board production facility or in composite material manufacturing in aerospace. As an expert in process heating, we are the right partner for you for all questions regarding the temperature control of your process systems. All NESS...

...Portable, high-quality PTFE-coated heating elements for butt welding of PE and PP pipes and fittings. The heating element temperature is infinitely adjustable and equipped with a thermostatic temperature control.