electrical testing Germany

... requirements. They can be used both in the measurement room and in production, as the run-out testing devices are built to be very robust. Support: Ø 1 – 32 mm, support length 10 – 220 mm, dimensions 300 mm x 120 mm x 200 mm...

... support you and take on tasks of the qualified Electrical Engineering Specialist in your company, e.g.: Testing and (re)establishing the proper and standard-compliant condition of your electrical machines, systems, and equipment; Troubleshooting when things get stuck; Documentation according to current standards; Training and instruction of your employees; Coordination of work processes.

...Testing facility for large gas meters in standard sizes from 0.5m³/h to 1000, 2500, 4000, or 6500m³/h, suitable for rotary piston, turbine wheel, or ultrasonic gas meters (iTF1000 to iTF6500)...

...In addition to the usual ICT/FCT procedures, we can also specifically verify each individual manufacturing step depending on the requirements. Efficient testing strategies and final functional tests are an integral part of our quality management. In our testing laboratory, we can conduct automated, static, and cyclic environmental simulations for you, ranging from temperature shock air and temperature shock liquid tests to storage temperature tests and humidity tests. Based on the future operating environment, we compile a suitable qualification program for each product.

...Electrical Installation...

...The assembly of these systems requires precision and a complex understanding of both mechanical and electrical engineering. Years of assembly experience enable us to take on the assembly and relocation of testing systems internationally. We specialize in the following systems: Acro Dyne, ASTEC, Uniformity, Dynamic Balance, X-Ray We offer you your project solution, all from a single source...

...The system is a self-sufficient unit and is made of a solid welded frame, contains media preparation, a hydraulic unit, and electrical engineering. The pressure test bench has a secure test chamber for burst pressure and hydrostatic pressure tests and, optionally, a climatic chamber for pressure tests with environmental simulation. Depending on the option selected, pressure change tests up to...

...We develop electrical test systems based on NI-PXI or NI-cRIO that can take on real-time capable measurement and control tasks. In addition, we can provide the FPGAs that can be used on the NI systems and the real-time operating system with software individually tailored to customer requirements.

...Testing device for checking protective measures in medical electrical installations according to IEC 60364-6 / DIN VDE 0100-600 / DIN VDE 0105-100...

...3M™ Novec™ 7300 High-Tech Fluid is a clear, colorless, and odorless liquid that has proven effective in many different applications, such as a heat transfer fluid, carrier for lubricants, electronic testing medium, and for cleaning applications. The 3M™ Novec™ 7300 High-Tech Fluid is a hydrofluoroether (C6F13OCH3). It has a boiling point of 98 °C, is clear, colorless, and low-odor, and can be used in a temperature range down to -38 °C.

... rest position in case of power failure. The pneumatic positioning eliminates the need for electrical wiring and also prevents EMC emissions. In the driving mechanics, non-metallic materials are used wherever possible. Expandable with additional pneumatic axes such as key switches or button activations.

...µCAN-BOX Series: Designed for the toughest applications, robust construction (IP66) allows for direct installation at the signal source. µCAN-SNAP Series: 22.5 mm slim housing for cabinet installation, mountable on TS35 DIN rail. µLAB Series: 19" housing technology for industrial and experimental testing. µCAN-F1 Series: Mobile measurement applications with reliable Lemo connectors...

...Testing of grounding and short-circuit assemblies (EuK's) according to BG-ETEM...

...Workpiece carrier system as a connection between screwing, turning, testing, and palletizing units...

...Roll pin hardness testing machine...

...We conduct the necessary electrical safety tests for you, as a basis for your CE marking and other conformity assessments.

We are a company with extensive experience as an EMS service provider. Ideas and concepts, reliability, high-quality manufacturing, timely delivery, and market-appropriate prices are always the most important cornerstones for harmonious collaboration with our customers. By upholding these core values, we have earned a high level of trust from our clientele across various sectors: - Automotive / au...

Custom, tailored solutions: Development, layout, and manufacturing of electronic assemblies, devices, systems. Independent E²MS service provider, family-owned, established for over 40 years.

The Plenge GmbH was founded in 1949 by Josef Plenge in Oelde. To this day, we have remained loyal to this location and have developed into an experienced control cabinet specialist in the 3rd generation. With 70 employees, Plenge GmbH is a reliable and competent partner in control cabinet construction and electrical engineering, as well as in hardware and software engineering. Our planning inclu...

...The PERFECTO cable gland made of V-0 polyamide is the ideal solution for cable entry in areas where superior fire protection claims are required. Features: — the polyamide material complies with UL 94 V-0 and EN 45545-2, R22: HL3, R23: HL3 — high sealing and immobilization of electrical cables — wide range of cable grommets from 3 to 42 mm — easy to install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short duration) — protection degree IP68 — testing standard UL 514B — with metric or Pg thread Material: Polyamide PA6 V-0 Protection degree: IP68 For cable diameters: 3 - 42 mm...

...Testing & Certification of welded structures and electrical conductors...

...erfi designs, develops, and builds complete and complex large-scale testing and inspection systems according to customer-specific requirements. In particular, all electrical safety and functional tests, as well as adaptations, are professionally designed and implemented in a test-specific manner. The foundation for this product line is a diverse product portfolio based on the safety testing devices of the CANclass series, along with a wealth of standardized measuring instruments and power supplies, all of which are integrated into the CANDY Power testing software.

...Professional Solutions in High Quality In electrical engineering, we offer high-quality solutions in the areas of connection technology, assembly, testing technology, and soldering technology. Our extensive machinery is state-of-the-art and optimally equipped for all requirements. All production processes are subject to continuous quality controls.

...In addition to sheet metal assembly, we handle the complete electrical assembly along with subsequent electrical testing, ensuring that the assemblies are ready for installation at the customer's site. Quality assurance has also been further developed in light of these requirements.

...Semi-automatic measuring device for characteristic measurement on commutators and armatures for electrical machines innovative evaluation software Measuring principle: The test specimen is rotated axially using a drive belt and probed with measuring probes (roundness measurement) The software calculates the commutator characteristics (including lamella jump) from the roundness...

... addition to electrical and optical testing of workpieces, components, or materials, these often need to be checked for tightness after processing. MiniTec offers you the highest expertise in the field of leak detection.

... regulator, accurate to 0.01 psi (0.069 kPa) External collection package. Horizontal dispersion system High temperature package Chromasoft software High voltage kit (over 480 VAC) High capacity oil & water extractor Custom sizes (extra height or any LxW) and configurations (pass-through electrical/mechanical ports)...

...We see ourselves as a system partner. This means we integrate the electrical control on-site and carry out the commissioning. We exclusively employ skilled personnel who are kept up to date with continuous training measures. The controls and switch cabinets are supplied, positioned, and aligned by us. After connecting to the hardware, we conduct the commissioning and extensive testing of all parameters and functions at the installation site.

...The electrical control is implemented as a PLC control. The testing process allows for manual, semi-automatic, and automatic operation.

...HTO-02, water-cooled furnace for material testing. Heating chamber (D x H): 100 x 170 mm • Lightweight, thermal insulating material (asbestos-free) • Stainless steel furnace housing • The furnace is prepared for the lateral installation of a length change sensor (HT-extensometer) Model HTO-02 • Heating zones: 1 • Max. Temp.: 1600°C • Heating chamber (D x H mm): 100 x 170 • External dimensions (D x H mm): 430 x 625 • Ext. slot (H x W mm): 104 x 32 • Water cooling: yes • Electrical connection: 28V/143A • Phase cut: yes...