current steel Germany

...Outstanding price-performance ratio ■ Measurement ranges up to a maximum of 18 mm ■ Output signals 0..20 mA, 4..20 mA, 0..10 V ■ Thread designs M12, M18, and rectangular ■ Linearity up to ±60 μm ■ Measurement on steel ■ Protection class IP6...

... draining the liquids from the container. The CSN®cartridge type heating elements and bath heaters are manufactured for nominal voltages from 110 up to 690 volts D.C. and A.C. In the case of higher heating capacities 3 or more elements each, being individually divisible by the factor 3 can be star or delta connected to 230 and 400 volts A.C. threephase mains. At 12 kW and a related length the elements are fabricated for 400 volts A.C. threephase delta connections. In any case the desired voltage and type of current has to be stated. ...

... specific application area depending on the prevailing pressure and temperature in the pipeline, the size of the pipeline, the requirements for tightness, the fitting itself, as well as the medium. Benefit from our automation services as well: Many of our ball valves are available either manually with a hand lever or with pneumatic or electric drive. Explore our extensive range in the current WESA catalog. We would be happy to provide you with a customized offer. Do you have any further questions? We look forward to hearing from you.

...We cover cylindrical screening baskets for, e.g., eddy current machines with or without ultrasonic excitation.

... in three variants (S, M, L). In its current version, the SPEEDMAX (S) has 20 processing stations and can produce up to 200 pieces per minute. Our engineers have developed a new machine concept that combines the advantages of 3D-NC wire bending and wire bending via slides. Bending, embossing, notching, flattening, joining, punching, and re-bending of tubes and wires are possible production technologies in the 20 processing stations.

...TEPROSA GmbH has been specializing for many years in the production of sophisticated, custom-fit sheet metal packages of exceptionally high quality. In the field of electrical steel, we manufacture individual sheet laminations and sheets for stators and rotors, as well as complete sheet packages (stator or rotor packages) made from various types of steel.

... obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

... class:IP20 Dimensions (W x D x H):178 x 260 x 355 mm Weight:8 kg Heating capacity:2 kW Pressure pump max.:27 l/min ; 0,7 bar Suction pump max.:22 l/min ; 0,4 bar Pump connection:M16x1 AG male Pt100 connection:Pt100 Digital interface:RS232, Ethernet, USB Device, USB Host Permissible ambient temp.:5...40 °C Bath opening WxD/BD:Ø = 25 / 150 mm Bath volume:2 Litres Power supply:230V 1~ 50/60Hz Current max.:10 A...

... for frozen meat Products with bones such as shanks / osso buco and soup bones Production of same weight portions such as cutlets Due to its design and numerous variants it is the perfect tool for industrial use Voltage:230 V / 400 V three-phase current Housing material:Stainless steel Installation area (L x W):440 x 500 mm / 17.3" x 19.7" Max. dimensions (L x W x H):800 x 777 x 1600 mm / 31.5" x 30.6" x 70.0" Product size:Height: 330 mm / 13.0" Width: 10 - 290 mm / 0.4" - 11.4" Protection type:IP55...

...without shaft seal streamlined housing made of PP or ETFE volume flow of up to 160 l/min delivery head of up to 16 m.WG back pull-out Size:16/160 Material:PP (glass-fibre reinforced) / ETFE (carbon-fibre reinforced) Max. delivery head in [m.WG] 50 Hz:16 Max. volume flow in [l/min] 50Hz:160 Max. density in [g/cm3] 50Hz **:1.15 Motor capacity in [kW]:0.55 Current rating (400V, 50Hz) in [A]:1.41...

...Cooling Electrode: indirectly water-cooled Cooling Nozzle: indirectly water-cooled Weldable Thickness: 0.05 to 1mm Max. Current Capacity: 20 A Duty Cycle: 100 % Plasma Gas: Argon Shielding Gas: Argon, Argon/Hydrogen Application Micro Plasma Welding: - Electrical Industry - Aerospace - Nuclear Technology - Measurement and Instrumentation - Apparatus Construction - Screen Manufacturing - Dental Laboratories - etc.

...When we receive a blunt cutting tool from you, it will undergo a comprehensive incoming inspection to assess its current condition. During this process, all important parameters (cutting angle, pitch, runout, wear marks, etc.) will be recorded and documented. After that, the necessary work will be determined, and a cost estimate will be prepared upon request.

... low self-weight. The walls are vertical to the base, which gives the profile additional rigidity. Material Quality: EDER uses high-quality structural steel that is produced according to current norms and standards. The steel is resistant to mechanical stresses and offers a long service life. Surface Treatment: Depending on requirements, the channel steel products can be offered uncoated, galvanized, or with special surface treatments to enhance corrosion protection and extend service life.

...Our steel construction is certified according to the current standards DIN EN 1090-2 and DIN EN 3834-2. We manufacture welded parts, welded constructions and welded assemblies up to execution class 3 (EXC3). Steel construction components such as: - Assembly devices for aircraft or automobile construction - Machine frames for compressor construction - Welded frames such as track systems and...

... steel, optionally tinned brass or stainless steel Connection type: Straight/angled solder pin, press-fit pin, solder cup, crimp Current carrying capacity High Density: up to 3 A (Signal) 40 A (Power) Connector type: D-SUB Product area: I/O...

...  Modul bus:Data communication via CAN, electronic supply 24 VDC  Cooling:Forced air cooling, power loss max. 350W  Mounting:Prepared for installation on cabinet mounting plates  IP-Protection Class:IP 20, Device for mounting in a closed, metallic control cabinet Dimensions (W x H x D):Book Size steel housing with stainless steel cover, (451 x 105 x 313)  Operating temperature:In vertical installation position: 0°C ... 35°C ...

... amplifier converts the measuring signals directly into interference-free voltage signals or current signals that can be transmitted over long distances. With the „gage“ measurement type, the pressure measurement is carried out against the ambient pressure, the sensor has a bore that is protected against ambient influences to compensate for the ambient pressure. With the „Absolute“ measurement type...

...Application area for heat treatment of circular and longitudinal seams Operating temperature up to max. 450°C Voltage: 30 to 84 Volts Power: 1.35 to 3.78 kW Current: 45 Amperes Heating element: Nickel-Chromium 80/20 Insulation: 96% aluminum oxide ceramic, silicate fiber in wire mesh Mounting: Outer sheet made of stainless steel 1.4301; special magnetic discs...

...agriculture or storage areas,these barrel fans are quite efficient. The device with a galvanized steel case and a chassis is also equipped with an inclined drum capable of being variably aligned for vertical flow positions,making it easily portable.This enables the direction of air current at high wall or ceiling sections as well. Practical advantages: A cost-saving option for semi-professional ventilation applications Air circulation capacity to 27,600 m³/h Plug-in devices easy to handle Installation:floor-standing Configuration:axial Function:ventilation...

...With the PRO Fireflex warm air hose, we have developed a PVC-free ventilation hose that is odorless and complies with the current fire protection standard EN13501 B-s1-d0. The hose is very lightweight, highly flexible, and has a temperature resistance of up to +150°C. It is made from PU-coated polyester fabric and features a galvanized spring steel spiral embedded under a wear protection layer on the outside. The hose is available in various diameters and custom lengths, and can be color-matched to the specific event.

m&k gmbh has been your expert in precious metal processing, repair, and recycling for over 30 years. As a family-owned business, we have developed into a leading supplier of precious metal-containing semi-finished products and finished goods for industry, crafts, research, and medicine. Our comprehensive precious metal recycling is particularly important in times of limited resources. Our strateg...

...Standard elements : - Robust frame in grey or white lacquered steel - Conformator tube - Welding jaw with heating rod (hard chrome plated) with constant temperature controlled by temperature controllers with digital display - Drive of the film by belt - Motorisation of the unwinding of the roll - Control generated by SPS - Touch screen display - Programme memory (weight, length of bags...) - Fine detection of the reel - Translucent mapping Material according to current EC standards. Films that can be used: polypropylene, composite, aluminium, barrier, polyethylene. ...

...Shielding panels against X-rays protect people and sensitive components, which is particularly important in medicine or non-destructive material testing. Until now, cost-effective lead has been the material of choice. However, due to its toxicity, it has become obsolete as a modern radiation protection solution. The current RoHS directive calls for a drastic reduction of lead in electrical...

...Measuring range for steel (St37) 0 – 4mm Sensitivity 2.5V / mm Typical resolution 2 µm Typical temperature stability 0.02% /K /Mb (measured at 10°C-90°C at 50% Mb) Length 17mm Ø13mm...

...Chromnista Armaturen GmbH is a northern German company that specializes in the custom manufacturing of chrome-nickel steel (stainless steel) fittings. Chrome Ni Sta. Chrome-nickel steel was also the namesake of the current company for Horst Bohlen at its founding in 1983. Our motivated and qualified employees produce high-quality stainless steel fittings and customer-specific custom parts. Our...

... flexible. The innovative system packaging solution. — High-quality battery system RivdomPLUS — Extended warranty. 24 months manufacturer warranty. Processing range blind rivets - Aluminum: 4.8 - 6.4 mm (4.0 mm optionally possible) Processing range blind rivets - Steel: 4.8 - 6.4 mm (4.0 mm optionally possible) Processing range blind rivets - Stainless Steel: 4.8 - 6.4 mm (4.0 mm optionally possible) Processing range blind rivets - Copper: 4.8 - 6.4 mm (4.0 mm optionally possible) Pulling force: 20,000 N Working stroke: 30 mm Weight (including battery): 2.0 kg Charging time: max. 30 min.

... values of over 80 dB up to 100 MHz. Even in the frequency range up to 2.5 GHz, it typically achieves at least 50 dB. A high current-carrying capacity is also provided. A triangular spring wraps around the shielding braid of the cable. The design of the spring prevents it from snagging in the braid during potential disassembly.

... round sections, too. Furthermore, Nickel has a better capability to conduct heat compared with stainless steel. Wattage:+ 5% - 10% Resistance:+ 10% - 5% dielectric strength:1500 V Insulation (cold 1000 V DC):> 10 MΩ Leakage current (cold):< 0,5 mA Maximum working temperature :750 °C Length tolerance:± 2% (min. ± 5 mm)...

... has a 4-digit LED-display for representing the differential pressure as well as up to 2 freely configurable contacts. Features: — differential pressure 0 ... 6 mbar up to 0 ... 1000 mbar — accuracy: 0.35% / 1% / 2% FSO — piezoresistive silicon sensor — compact and robust aluminium housing — suited for non-aggressive gases and compressed air — current and voltage output signals in 2- and 3-wire systems Optional Features: — display and switching module with up to 2 contacts — customer specific versions...

... and IECEx. EGE proximity sensors operate on the current inductive principle and switch when a metallic object approaches. Sensors from this family are suitable for explosive dust atmospheres (Zone 22) for presence detection, position and motion monitoring, as well as counting metallic objects and speed control on conveyor belts.