The induction generator module is designed to supply up to 6 induction coils (inductors) with a power of up to 3 kW each. The device operates on the three-phase mains with a voltage of up to 400 V and a frequency of 50/60 Hz. The mains current is rectified and fed to the DC link, from which the inductors are individually supplied. The output power is controlled via the Kendrion controller of the modular industrial heating system. The setting range from 0% to 100% can be selected individually for each channel. By using state-of-the-art semiconductor switches, the output stages achieve high efficiencies, at working frequencies up to 25 kHz.
Functions:Integrated power measurement, short circuit detection, DC link monitoring, automatic frequency tunin
Load type:specific induction coils (inductance 875 μH ± 150μH)
Number of channels:6 channels individually controllable
Operating power:6 x bis zu 3 kW, continuous power 18 kW
Operating frequency:2 ... 25 kHz, automatic operating point determination
Supply voltage:3 x 400 VAC +10% /-15%; 50/60 Hz; Network configuration TT or TN
Modul bus:Data communication via CAN, electronic supply 24 VDC
Cooling:Forced air cooling, power loss max. 250W
Mounting:Prepared for installation on cabinet mounting plates
IP-Protection Class:IP 20, Device for mounting in a closed, metallic control cabinet
Dimensions (W x H x D):Book Size steel housing with stainless steel cover, (451 x 105 x 313)
Operating temperature:In vertical installation position: 0°C ... 35°C
Rotary solenoids in square design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Furthe...
Control Linear Solenoid D51 with short stroke travels and high magnetic forces for precise switching of valves. The control solenoid is based on the f...
The new Vico MT series is a powerful display unit with multi-touch technology in an industrial-grade unit design. The installed CODESYS HMI software p...
With an EtherCAT master and two additional CANopen interfaces the new CODESYS control Scout from Kendrion can be used as an HMI and control unit.The s...
The robust OAC vibratory feeder coil series consists of a UI core and two excitation windings connected in series. Continuous controllability via driv...
Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The ar...
The robust OAC vibratory feeder coil series consists of a UI core and two excitation windings connected in series. Continuous controllability via driv...
Flat gripper with a hard ferrite magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force i...
Flat gripper with a neodymium magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is a...
Open frame solenoid as thrust type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versio...
The fanless PLC with iMX6 Quad Core processor technology combines compactness with longevity and performance. The device has an integrated flash disk ...
The permanent holding magnets achieve a holding force of up to 35,000 N in the de-energized state and are designed for long holding of magnetic workpi...
High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armatu...
The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or...
The permanent holding magnets achieve a holding force of up to 35,000 N in the de-energized state and are designed for long holding of magnetic workpi...
Rotary solenoids in square design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Furthe...
Control Linear Solenoid D51 with short stroke travels and high magnetic forces for precise switching of valves. The control solenoid is based on the f...
The new Vico MT series is a powerful display unit with multi-touch technology in an industrial-grade unit design. The installed CODESYS HMI software p...
With an EtherCAT master and two additional CANopen interfaces the new CODESYS control Scout from Kendrion can be used as an HMI and control unit.The s...
The robust OAC vibratory feeder coil series consists of a UI core and two excitation windings connected in series. Continuous controllability via driv...
Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The ar...
The robust OAC vibratory feeder coil series consists of a UI core and two excitation windings connected in series. Continuous controllability via driv...
Flat gripper with a hard ferrite magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force i...
Flat gripper with a neodymium magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is a...
Open frame solenoid as thrust type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versio...
The fanless PLC with iMX6 Quad Core processor technology combines compactness with longevity and performance. The device has an integrated flash disk ...
The permanent holding magnets achieve a holding force of up to 35,000 N in the de-energized state and are designed for long holding of magnetic workpi...
High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armatu...
The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or...
The permanent holding magnets achieve a holding force of up to 35,000 N in the de-energized state and are designed for long holding of magnetic workpi...