...This 2-piece female/female valve is a shut-off valve with full passage. The gas threading of this valve complies with ISO 7-1 standards (except NPT). Additional options: - Butterfly actuator (58137) instead of the handle, up to DN32 - Elevated handle Find more stainless steel ball valves on our site. Material: Stainless Steel 316L Available dimensions: from DN8 to DN80 Nominal pressure: 63 bar (1000 lbs) Temperature: from -20ºC to +150ºC Lockable handle: Ø padlock hole 7.5 mm...
France, Soissons
STAPPERT France is a European leader in the distribution of long products, tubes, and accessories made from highly corrosion-resistant or refractory stainless steels. Our extensive range of stainless steel includes round bars, billets, flats, keys, squares, hexagons, tubes, and accessories, as well as angles, profiles, and sheets. With 11 locations across Europe, STAPPERT France is a leader in th...
France, Monteux
...Reference: 004946 TECHNICAL CHARACTERISTICS - Stainless steel tank 304 - Model: SPAIPSER7500B - Usable capacity: 7,501 Liters - Flat bottom with a 4% slope - Stainless steel test tap DIN 15 - Level tap diameter 20 with stainless steel protection - Partial drain with 100 x 100 square flange and 40 MACON outlet valves - Total drain with 100 x 100 square flange and MACON 40 outlet valve...
... identical to those of the check valves. The installation and maintenance procedures are the same as for other RFF taps. It is important to pay attention to the direction of fluid flow so that the filter mesh is supported by the outer mesh. The filters can be identified by a machined groove on the cap. They are also delivered painted gray, while the check valves are painted blue to indicate a non-return function. The stainless steel filters are similar to the steel filters except for: Available from DN 10 to DN 25. Body made of stainless steel X4CrNi 18-10 (1.4304) EN 10088-3.
France, Arbonne
...The wall valve model VMU is a four-sided closure wall valve designed for installation on walls or partitions. It is used in water treatment (Wastewater Treatment Plant, Drinking Water Station) SIZES: from section 200x200 up to 2000x2000 (standard version). Other dimensions available upon request. • The wall valve model VMU/SCA has a square or rectangular opening. Manufacturing of wall valves: stainless steel 304 L or stainless steel 316L...
France, Ste Hélène Du Lac
...Support for stainless steel mural 450 x 250 mm 2 siphons Lg. 1000 mm with stainless steel connections between the central unit & the bottles Connection for two bottles, with isolation valves Pressure reducer stage 1 (pressure reduction from 200 to 5/6 Bar) Safety valve (for pressure reducer stage 2) Dry manometer 0/300 Bar with protective plastic sheath (reading of the supply bottle pressure) Dry...
France, Acquigny
... co-penetrating and counter-rotating. – A clarinet with manual stainless steel valves for steam injection at 6 points. – In the conditioner with a ramp of 4 spray nozzles, each equipped with a manual valve – PT 100 temperature probe at the product outlet. – A mild steel frame to support the entire assembly.
France, Challes Les Eaux
...Leaks can happen at any time. Protecting personnel from splashes is a legal obligation. A controlled leak also means savings, as you avoid damaging related installations. You concentrate the discharges and eliminate splashes. A complete range of flange protection, textile or stainless steel valves. Quick turnaround.
... in raking the sludge towards the sludge discharge cone. Sludge cone: collects the sludge transferred from the bottom of the tank via suction pipes. Suction pipes equipped with extended control valves. Stainless steel weir plate and arm for transferring clarified water to the overflow.
France, Mulhouse
Recowa is a representative and distributor of industrial equipment from leading global manufacturers of equipment and components in the pharmaceutical, food processing, cosmetic, biotechnology, and chemical sectors. Our area of operation encompasses France and Switzerland. With two decades of experience in the industry, we offer dedicated service and support our clients in their choices of qualit...
...valves, connector bodies, buttons, plugs, hydraulic blocks, pusher bodies, shafts, balls Turning steels, stainless steel, aluminum, brass, plastic Cam-operated lathes, multi-spindle lathes, CNC lathes Surface treatment, anodizing, grinding, polishing, assembly of subassemblies All series In bars from Ø 2 to Ø 65 mm and in billets up to Ø 150 mm on CNC lathes...
...Various piping elements Chinese hats Open sky hats Grated terminal Terminal elbows Load compensation valves (check valves) Custom sensors Material used, choice of: Galvanized steel Stainless steel Electro-galvanized steel + EPOXY paint in your choice of RAL Brand: Aspir'elec...
...Welded steel construction in carbon steel or stainless steel Continuous use from +200°C to +600°C. Upstream/downstream sealing by metal/metal stop and blowing hot air between the two butterfly valves. Diameter DN 400 to DN 4000 or section 200 x 200 to 3000 x 3000. Electric, pneumatic motorization, manual reducer.
France, Maurepas
... offers standardized or custom-made protective solutions. The protective sleeves are perfectly enveloping, made from soft, reinforced, and UV-stabilized materials (PTFE reinforced with fiberglass, pure woven Goretex® PTFE, PP, PVC, Stainless Steel). These sleeves withstand pressurized jets of even hot chemicals. The jet of the leak is broken inside the sleeve, thereby protecting people and surrounding equipment from dangerous accidental splashes.
France, Amneville
...We manufacture rough or fully machined body and flange for 3 pieces ball valves in : • Austenitic stainless steel Alloys (CF8M, CF3M…) • Aluminium-Bronze (UNS C95500…) • Duplex and Super Duplex (CD4MCu, CD3MN…) • Nickel-based and high-alloys (CW-6MC, CU5MCuC, M-35-1 CW-12MW…) • Martensitic alloys (CA15, CA6NM…) • Other materials on request...
France, Morsang Sur Orge
...Spring-loaded and direct passage valves to relieve overpressure from buffer tanks, pipelines, and other equipment. Advantages - Compliance with DESP 2014/68/EU standards, category IV, Modules B and D - Customizable opening pressure - TÜV certificate for pressure adjustment - Available in brass or stainless steel (ES) - Seal suitable for gas or as per customer request - Compact dimensions for easy installation - Wide selection of inlet connections - With or without condensation outlet - Dust cap - SV805A (manual purge), to check proper functioning...
France, Amneville
...Rough or fully machined centrifugal & sand castings for butterfly & ball valves - Main products: valve body, housing, gate for butterfly valves, ball trunnion bearing & ball for trunnion mounted ball valve, flange, seat for ball and butterfly valves, cage for pressure control valves,... Alloys: - bronze and brass - low allied and pure copper - aluminium bronze - aluminium - stainless steel - Ni-based and special alloys...
France, Cessieu
...Our GOVAL butterfly valves are standard or custom-made plumbing products manufactured and/or stocked on demand. Our valves meet the necessary standards and certifications (ACS; ATEX; ISO; etc...). Made from cast iron, steel, or stainless steel; our expertise spans across all types of industries.
France, Etupes
...Description Construction Materials • Body, flange, screw, and shaft: stainless steel • Joints: stainless steel (optional nylon with code -A) • Membrane and valves: elastomer resistant to hydrocarbons (optional neoprene with code -A) • Lever: galvanized steel with a 1-meter long rubber handle Features and Specifications • Manual membrane pump Fluid: Water, Seawater, Fluid with particles, Diesel...
France, Haubourdin Cedex
...Product Description: DN 10 - DN 50 Flanged PN 10 (other connections available upon request) PMA: 10 bar (other PMA available upon request) Construction in 316L stainless steel, rolled and welded under argon atmosphere, other options available upon request Cylindrical body Bolted cap with double fitting and PTFE seal (other options available upon request) Double plugs made of Uranus 65 Non-rotating rising stem with external thread Independent stuffing box and cross Stuffing box packing in PTFE (other options available upon request)...
France, Cessieu
France, Nîmes
...Double bain-marie GN 1/1 with 2 drainage taps Stainless Steel 2 water drainage taps Capacity: 2 GN 1/1 pans - 150 mm deep Adjustable thermostat from 0°C to 90°C Power: 3,000 W / 230 V Dimensions: W 660 x D 540 x H 220 mm Weight: 19 Kg Ref:CBMDV...
France, Clermont En Argonne
...Electric motor 4 poles (1450 rpm) with thermal protection and water cooling. Linear pump with 3 ceramic pistons, nickel-plated brass head with high-temperature seals and built-in bypass valve. Integrated elastic seal for better coupling of the pump. Low voltage T.S. and time-delayed total stop. Stainless steel suction and discharge check valves. Vertical rûleur with high thermal...
France, Thann
... precisely regulate the product flow during emptying and is rather recommended for a complete discharge of the bag. The dimensions, types of valves, accessories, and other features of ManuLine's Big Bag emptying stations are fully customizable. The assembly and disassembly of the stations are simple, quick, and safe thanks to the cup stacking system. For users in the food industry, ManuLine also offers Big Bag emptying stations made of stainless steel. Emptying for high-granule products: Granule size greater than 6 mm Station dimensions: Specific to request (customized)...
France, Villefranche Sur Saône
... buffer tank with 2 levels Complete equipment including: - 80-liter sterilizable cylindrical stainless steel 304 tank equipped with 2 stainless steel butterfly valves with a diameter of 40, clear draw + total drainage, with a domed bottom, lid + handle + inlet for inert gas injection, stainless steel 304 frame mounted on wheels. - Stainless steel level probe = 2 measurement points with...
France, Le Bignon
...A very durable HDPE tank. - underground installation only - maximum operating temperature: + 35°C - do not install in flood-prone areas (special tanks for groundwater available upon request). Two stainless steel lifting pumps for slightly contaminated water (10 mm passage) supplied with 20 m of cable + 1 adjustable float for on/off (for each pump). Two shut-off valves with union fittings for...
France, Vougy
... steel (1.4570). These parts are used in high-speed inkjet printers for the food industry. Joseph Martin manufactures, assembles, and tests valves for various pressure ranges starting from 10 mbar. We work on: - Single-pin - Pulsed laser Some of these parts are also made from natural PEEK plastic (Ketron1000).
France, Décines
...Bronze, cast iron, steel, stainless steel Threaded, flanged, welded Balancing accessories (case)...

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play