butterfly valve France

...MAIN FEATURES - Full bore valve - Nominal pressure: 10 bars, 16 bars, or 25 bars - Maximum operating pressure: 16 bars - Operating temperature: from -10 °C to +50 °C - Operation via square (30 x 30 mm) or handwheel - Short or long spacing (FAH or FSH closure) - Flanges drilled to ISO PN10 and PN16 up to DN150; from DN200, drilling ISO PN10 or PN16 to be specified - Compliant with standards EN 1074-1 and EN 1074-2 - A.C.S certified product Nominal Pressure: 10Bars or 16Bars...

...Welded steel construction in carbon steel or stainless steel Continuous use from +200°C to +600°C. Upstream/downstream sealing by metal/metal stop and air blowing between the two butterfly valves mounted on a single axis. Diameter DN 300 to DN 3000. Electric, pneumatic motorization, manual reducer.

...Butterfly valve with clamp ends Ra = 0.8 µm FKM seal Stainless Steel 316L ORDER EXAMPLE: 663456-25 Available sizes: from DN25 to DN104 mm Standards: CE 1935/2004 PMS (at 20°C): 12 bar from DN25 to DN76; 10 bar for DN104 Temperature: from -20°C to +150°C (depending on the seal)...

...SEALING JOINTS FOR THE INDUSTRY Parts primarily intended for the world of valves and fittings in general – washers, O-rings, valve seats. These standard parts or custom designs can also be made from materials such as PEEK, POM, TFM, etc.

...The central valve with a tight disk and a play-free connection between the disk and the stem offers great maintenance convenience. The quick replacement of the sealing gasket is facilitated by the two-part body design. The entire body is coated with an elastomer, with the sealing gasket serving as a multifunctional sealing element. This valve can be used for a wide variety of fluids, ranging from...

...Our GOVAL butterfly valves are standard or custom-made plumbing products manufactured and/or stocked on demand. Our valves meet the necessary standards and certifications (ACS; ATEX; ISO; etc...). Made from cast iron, steel, or stainless steel; our expertise spans across all types of industries.

...Valve that offers absolute sealing and requires minimal maintenance. It is used for clear water networks and non-loaded fluids. Manufactured according to standard 97/23/EC (PED) Model 2103: cast iron butterfly version Model 2109: stainless steel butterfly version Maximum operating pressure 16 bars from DN 25 to DN 300 10 bars from DN 350 to DN 500 Connection between flanges GN 10 / 16 Temperature range -10°C to 120°C * Also available in threaded ear version (Model 2108)...

...CENTERING BUTTERFLY VALVE - GJS-500-7 CAST IRON BODY - CF8M STAINLESS STEEL BUTTERFLY - EPDM SLEEVE...

Specialist in Manufacturing & Distribution in the sectors: Faucets. Piping. Protection. Fittings. Fire. Pumps. The Gotrex Group consists of: - GOTREX (Building Products Distribution, Industry, Water Supply) - GOVAL FRANCE (Manufacturer of Faucets for all sectors) - CHERO FRANCE (Distributor of Industrial Valves, Fittings, etc...) Near Lyon, the French capital of industry & construction, the Got...

TRANSFLUID specializes in various sectors, such as: stainless steel valves, stainless steel fittings, tank equipment, metrology, hygiene, fluid handling, barrels, and seals. Founded in 1994, TRANSFLUID is specialized in stainless steel valves for professionals. Initially present in the wine industry (valves, fittings, tank equipment and oenological accessories, doors and hatches for tanks and cis...

...We manufacture valve bodies in copper-aluminum: - EN 1982 - ASTM B148 - Inoxyda 53 or Inoxyda 90 delivered raw, rough machined, or fully machined according to international quality standards.

...We produce balls and seats for ball valves and butterfly valves, either raw or fully machined, in: • Austenitic stainless steel alloys (CF8M, CF3M…) • Aluminum-Bronze (UNS C95500…) • Duplex and Super Duplex (CD4MCu, CD3MN…) • Nickel and high alloys (CW-6MC, CU5MCuC, M-35-1 CW-12MW…) • Martensitic alloys (CA15, CA6NM…) • Other materials upon request...

...API Plastics offers quality products from the leading brands for 3-way valves, butterfly valves, automatic valves...

...TECHNICAL SPECIFICATIONS - Belon stainless steel - Butterfly drain valve - Level tube with millimeter scale - Central reinforcement DIMENSIONS - Total length: 4500 mm - Width: 1400 mm - Height: 1400 mm...

The experience gained over our 26 years of existence is a guarantee of quality and reliability. A large number of companies around the world have trusted us for years. We offer a wide range of products (tubes, fittings, flanges, valves, accessories, etc.), as well as complete sets (packages). Our production and services are focused on quality, service, and especially responsiveness. The dynami...

...Reference VGH10.19150 Detailed Description Gate valve body DN 125 Service pressure 250 mb Class A EN161 with an actuator Download (pdf)...

...The IVALDISC BV03 model has two main functions: Shut-off valve:...

...Rough or fully machined centrifugal & sand castings for butterfly & ball valves - Main products: valve body, housing, gate for butterfly valves, ball trunnion bearing & ball for trunnion mounted ball valve, flange, seat for ball and butterfly valves, cage for pressure control valves,... Alloys: - bronze and brass - low allied and pure copper - aluminium bronze - aluminium - stainless steel - Ni-based and special alloys...

... buffer tank with 2 levels Complete equipment including: - 80-liter sterilizable cylindrical stainless steel 304 tank equipped with 2 stainless steel butterfly valves with a diameter of 40, clear draw + total drainage, with a domed bottom, lid + handle + inlet for inert gas injection, stainless steel 304 frame mounted on wheels. - Stainless steel level probe = 2 measurement points with...

... with a diameter of 160 mm with a screw cap - Overflow on top via DN25 valve with a 90° elbow - Inlet/outlet on the side via DN50 valve with butterfly valve - Reinforcement of the 4 corners with plates featuring rings and stainless steel screws TECHNICAL SPECIFICATIONS: - PVC fabric type N905, 900 g/m² in RAL 6026 green color - Tear resistance: CH 400 / TR 400 daN 5cm - Tear strength: CH 45 / 45...

...1000-liter container (IBC 1000 L) new - metal pallet - with UN approval for the transport of hazardous materials. Application: transport and storage of various liquids Capacity: 1000 liters - maximum density 1.9 Dimensions: 1000 x 1200 x Ht 1160 mm Screw cap with filling opening diameter 150 mm Valve with built-in butterfly tap, diameter 50 mm Empty weight: 56.5 kg New inner bag made by blow...

TECOFI is a company specialized in industrial valves. TECOFI products are ideal for businesses in the following sectors: chemicals, oil, food processing, textiles, paper, cement, metallurgy, and sugar production. TECOFI also serves companies in climate engineering as well as water supply. TECOFI offers complete sets, gate valves for pasty and powdery products, butterfly valves, check valves...

...pharmaceutical, petrochemical, paper, nuclear industries, and more. Availability and stock guaranteed. Our product range includes: butterfly valves, straight-through valves, spherical rotating valves, gate valves, valve taps, bellows valves, piston valves, filters, check valves, pressure relief valves, steam purgers, metal compensators, steam dispersion headers, and many others. Also, visit our website to discover all our products.

DANFOSS SOCLA specializes in the manufacturing of industrial valves made of steel, cast iron, stainless steel, and epoxy; check valves, foot valves, strainers without check valves, disconnectors, control valves, ball valves, butterfly valves, stop valves, anti-vibration sleeves, air release valves, and surge relief valves, as well as accessories for heating, pump controls, and pressure reducers...

...submersible volumetric pumps - Ball valves with a spherical turn, valve seats, piston valves, diaphragm valves, needle valves - Butterfly valves, plastic valves, with electric or pneumatic servomotors, - Guillotine valves, plug valves, sleeve valves, wall-mounted valves, control valves with pneumatic or electric servomotors. • Protection/Safety: Check valves, metal filters, condensate...

...GEMÜ is one of the world's leading manufacturers of fittings, automation components, and piping products. Since 1964, it has developed a wide range of innovative products for the control and regulation of fluids: modular plastic and metal valves with membrane technology, check valves, ball valves, and butterfly valves adaptable to every application. GEMÜ's valve and instrumentation technologies...

... over 50 years. The site in Vaulx-en-Velin houses the headquarters and the manufacturing plant. Here, part of the standard SAMSON range (globe valves, butterfly valves, self-operated regulators) is produced for French customers. SAMSON RÉGULATION develops and manufactures its own product range and is globally recognized within the SAMSON group as a center of competence for the food and pharmaceutical sectors. Examples of products developed and manufactured in France include: segmented ball valve, high-pressure valve, hygienic control valve, aseptic control valve, pressure regulator, and diverter.