fluid meters

...Fluid Velocity Measurement LS20B Type: Portable...

... diameter of 1800 mm and a total length of 8 km, which serves as a perfect illustration. These pipes combine chemical, abrasive, and mechanical resistance; they were buried at more than 12 meters deep to ensure a gravitational flow velocity of a loaded fluid. This project required the transformation of 3400 tons of vinylester GRP over 24 months and was the subject of a "case history."...

... lies in its ability to dispense precise doses across a wide range, whether for fluid or slightly viscous products. The machine is compatible with various dosing systems, such as electromagnetic or mass flow meters, making it suitable for a variety of industries, including food processing and chemicals.

...Peripheral electric pump • Maximum suction 8 m • Brass turbine • Electric motor with built-in thermal protection • Maximum fluid temperature 60 ºC • Maximum ambient temperature 40 ºC • IP44. Surface electric pump Termar QB 60 0.5 HP 240V with a head of 3-35 meters of water column and a flow rate of 2100-300 L/H Cone: QB Mode: QB60 Volts: 240 HP: 0.5 Width: 2.6 MCA: 3-35 G/H: 2100-300 Reference: 1104314 Suction/Outlet(): 1 Turbine: Stainless steel Max fluid temperature (°C): 70 Max temp with (ºC): 40 Max suction: 7 Reference: 477.1104314...

... power supply is required. Fluid: for gas Technology: variable area Other features: with metal tube; inline Process temperatures: from -80°C to +150°C Operating pressure: up to 130 bar Upper measurement limit for liquids: 1.6 to 160 l/h (water: 20°C) Upper measurement limit for gases: from 16 to 4,800 l/h (air: 20°C, 1.013 bar)...

... specially developed for effective dehumidification in spaces with high humidity and can also be optimally used in environments with hot tubs or spas, as well as in gyms. The standout feature of the DS 60 is its fiberglass-reinforced plastic housing, which is easy to clean and unaffected even by the air in particularly reactive environments. Mobility: fixed Fluid: air Other features: for pool, wall-mounted...

...The TAWI articulating arm, with lifting capacity up to 60 kg and a working radius up to 360 degrees, comes in various or customized arm lengths up to 4 meters. For thight spaces Reaching 360 degrees Enabling fluid operations User friendly...

... IST AG, making the corrosion-resistant thermal mass flow meter ideal for flow monitoring of aqueous solutions, alcohols, and oils, including aggressive liquids. Calibration range: 1-200 kg/h Temperature: from +5 °C to +50 °C Fluid connection: hoses with a 4 mm inner diameter Internal dimensions of the flow channel: 3.7 mm Single media-contact material: stainless steel 1.4301 Response time: 0.5 seconds...

...—hydrostatic immersion probe for continuous level measurement up to 20 meters with analog output —measurement probe is inserted from the top, the cable can be routed along the tank wall —for tall tanks with agitators —for clogging, contaminated, and highly viscous products —independent of foam formation and fluid movement —for continuous level measurement...

...{"features":["Fluid-assisted","Continuously expandable","Ready to use from trenches and from the surface","Pressure and pulling force of 4 tons","For pipes with a diameter of 50 to 250 mm over lengths up to 100 meters","Compact dimensions: L=1,900, W=750, H=950 mm","Available optionally on a crawler vehicle","Radii of 30 m are possible","Vibration-free/low noise","With hydraulic unit and bentonite mixing plant transportable by truck","Environmentally friendly, closed system, operated with bio-oil","Client-friendly pipe laying method","Made in Germany"]}...

...OUR IN-HOUSE TEST PLANT AND LAB In order to ensure the high quality and long service life of our agitators, we have set up an in-house plant for testing our agitators. At the end of the manufacturing process, all of our agitators undergo a specific test procedure with a final test run. Here, we can test agitators with a shaft length of up to twelve meters. When designing our agitators, we use fluid mechanics simulations in our in-house laboratory. All Geppert mixing systems are delivered with O&M Manual and worldwide technical service.

... in air ducts and air conditioning equipment. Because of the calorimetric mode the media temperature is also monitored. Flow rate measurement In addition to reproducibility, flow-rate measurement demands a defined degree of accuracy. The flow meters continuously and accurately measure a defined volume of a fluid per unit of time and are suitable for applications where qualitatively consistent process results and a steady supply of fluids is essential. We offer flow meters with calorimetric, magnetic-inductive and Vortex measurement principle for various areas of application.

...Widest range on the market up to G 4 000 (6,500 m3/h) Pressure indication of the housing PN... Type of construction: Rotary piston gas meters Flow rate: 6×10^-1 to 6,500 m3/h Fluid to be conveyed: air, neutral gases Transport: oil-free.

...Flow control valves regulate the flow or pressure of a fluid. Control valves normally respond to signals generated by independent devices such as flow meters or temperature gauges. Alpeco stock a range of Perrett hydrovalves and is the UK distributor for OCV Control Valves, who are leaders in control valves, check valves and pressure relief valves. Our flow control valves can be used across a wide range of fluids from fuel, oil and lubricants to paints, chemicals, water and cement.

...2 electric pumps 3.6 m3/h HMT 60 meters 1 manual pump 1.3 m3/h 1 metal frame Designation 2 x JEV14 + EZ1RS (PA0014), 2 x JEV15 + EZ1RS (PA0015) Type single-phase (PA0014), three-phase (PA0015) Power 0.75 Voltage 230 (PA0014), 400 (PA0015) Current 6 A (PA0014), 2.2 A (PA0015) Suction inlet 1" Discharge outlet 1" Specifications and advantages Electric pump with manual priming and backup FLUID: Diesel TECHNOLOGY: Side channel, Panoply ATEX: No PUMP TYPE: Equipped FLOW RATE: 1.3 m3/h - 3.6 m3/h OUTLET: 1" BODY: Cast iron MECHANISM: Brass...

... • Various operating principles: Guided microwave, capacitive, and hydrostatic • Devices for limit level detection or continuous level measurement Flow sensors / flow meters • Flow monitoring even for aggressive media Temperature sensors • Devices with integrated or separate evaluation electronics • Modular concept for a variety of applications Analysis sensors • Compact conductivity sensors for the food sector • Inductive and conductive conductivity sensors • Relative humidity and particle concentration...

...Conception Circular orifice offset from the center of the plate; the most eccentric part of the hole is tangent to the inner wall of the piping. Type de fluide Liquids loaded with solid particles that may settle or vapors containing condensates; dirty, loaded, or two-phase fluids. Caractéristiques Flush orifice with the inner wall of the piping to prevent particles or condensation from stagnating. Orifice mounted upwards (for suspended gas discharge) or downwards (for solid particles or condensates) depending on the nature of the fluid. Type de mesure Recommended pressure take-off 0/0.

... horizontal, vertical or inclined positions Accurate measurement result, since the reading is independent of the temperature and viscosity of the fluid Minimum failure costs due to simple function monitoring, rapid fault analysis and the possibility of simple repairs on site Areas of application To measure heating fuel consumption by oil burners (for example, in heating boilers, industrial furnaces, tar processing plants) Consumption monitoring and optimisation (ships, generators and large vehicles, etc.) Flow measurement for mineral oils Optional remote processing and integration into...

...Oval gear meters for use as in-line meters for oil, DEF / AdBlue®, windshield washer fluid, or antifreeze fluid lines, depending on the wetted materials of the meter. They can be mounted on the wall in the fluid line or at the pump outlet. The meters are shock-resistant and isolated from the fluid being pumped. The entire unit is enclosed in a molded TPE casing. The meter features an LED light...

...Emtechnik flow meters have been specially designed to measure air flow rates across various ranges. All sealing surfaces and threads are manufactured without a joint plane. Upon request, we can also offer custom flow meters with specific measurement ranges and measurement value input (annular detector or Reed switch). In this context, we need information regarding the fluid, pressure, temperature, density, viscosity, and measurement range. Flow: 0.2-2.0 l/min...

... already high costs. Furthermore, calibration conditions can differ greatly from actual operation conditions compared to test bench conditions, so even if calibrated, the measurement uncertainty in operation remains fairly unknown. This often leads to more difficult fluid distribution optimizations and leaves billing fairness to a gamble. More precisely measured values of flow sensors may uncover hidden saving potentials within the fluid distribution system and allow more exact performance indicators, improving energy efficiency.

...The Flowfit CCA250 assembly has been designed to accommodate all the necessary sensors for accurate disinfection control: the chlorine sensor and pH/redox sensors for compensation and measurements. It enhances sensor availability and offers integrated alarm and flow regulation for a bypass measurement that is always operational. With the CCA250, disinfection process control is comprehensive, ensuring that the water is always guaranteed to be sterile. Fluid: for water...

... laboratory or industrial environment. Input and Output: Output: pump speed control 0-10 Volt 4-20 mA RS-485 (optional) Input: flow meter and other sensors Pulse (flow meter only) 0-10 Volt 4-20 mA RS-485 (optional) Types of pumps: Volumetric, gear (internal, external), lobes, screws, vanes, pistons,... Types of flow meters: gears, ultrasonic, Coriolis...

... order to avoid a "dry start" to prevent cavitation during pump operation. Classic methods for creating pressure boosting before centrifugal pumps can be: installation of a tank from which the fluid is pumped, several meters above the axis of the pump shaft and placing the pump in the draw-off sump; inclusion of an additional vacuum pump into the process, which is capable of building the desired...

... of 3 meters. COOLING CAPACITY: 161 kW (at LWT of -30 °C, condenser water at 6 °C) MIN. OUTLET FLUID TEMP. (°C): -50 °C POWER SUPPLY: 400 V 3p 50 Hz HEIGHT (M): 2.59 LENGTH (M): 3.05 WIDTH (M): 2.44 WEIGHT (KG): 4110...

...Our Explosion Proof Flow switches efficiently monitor any in- and decreasing flow, through a single moving element that reacts to the flow of fluid (liquid or gas) in the system. Within applications like Industrial, biomedical, (Gas) Analyzer System, Emission monitoring system etc, these switches provide very accurate, reliable, secure and safe operation, trustfully relieving your responsibilities.

OFS Online Fluid Sensoric GmbH is a medium-sized company with decades of expertise in industrial water treatment. Our goal is to handle the resource of water in an environmentally conscious manner. Our products include analysis, monitoring, and control systems for process water, specifically for water softeners, reverse osmosis systems, as well as steam boilers and hot water systems. Our requirem...

... smallest amounts of water without generating wastewater. Due to the modular design of the nozzle bar, the WEBMOISTER 3000 can now re-moisten paper webs up to 3 meters wide. In heatset web offset printing, paper loses moisture during drying. The electrostatic re-moistening of the WEBMOISTER 3000 restores the water content in the paper after drying to the necessary level, thus ensuring high-quality...

... single and double shells for petroleum products, oils, and LPG cooled to -50 °C for all types of offshore moorings and terminals similar to CMBM, SPM, and FPSO facilities. Offshore hoses are available in diameters of up to 24” and a maximum working pressure of 100 bar, allowing their use in deep waters of up to 300 meters.

...The robust one-piece drill rods allow for a bending radius of 22 meters. Two types of mixing plants are available for preparing the drilling fluid. The hydraulic power pack is also suitable for other applications and can be individually adapted to the respective purpose. Model: MT 9x12 Dimensions (l x w x h) [mm]: 1,350 x 600/1,020 x 1,300 Weight: 500 kg Max. Torque: 1,250 Nm at 200 bar Max. Speed: 125 rpm Max. Pull/Push Force: 90 kN at 160 bar / 80 kN at 160 bar...